diff mbox series

[v2,3/4] dt: lm3532: Add property for full scale current.

Message ID 20190813181154.6614-3-dmurphy@ti.com
State Superseded
Headers show
Series [v2,1/4] leds: lm3532: Fix brightness control for i2c mode | expand

Commit Message

Dan Murphy Aug. 13, 2019, 6:11 p.m. UTC 
Add a property for each control bank to configure the
full scale current setting for the device.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

---

v2 - Change ti,fs-current to led-max-microamp - https://lore.kernel.org/patchwork/patch/1109501/

 Documentation/devicetree/bindings/leds/leds-lm3532.txt | 4 ++++
 1 file changed, 4 insertions(+)

-- 
2.22.0.214.g8dca754b1e
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
index c087f85ddddc..53793213dd52 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3532.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
@@ -62,6 +62,9 @@  Optional LED child properties:
 	- label : see Documentation/devicetree/bindings/leds/common.txt
 	- linux,default-trigger :
 	   see Documentation/devicetree/bindings/leds/common.txt
+	- led-max-microamp : Defines the full scale current value for each control
+			  bank.  The range is from 5000uA-29800uA in increments
+			  of 800uA.
 
 Example:
 led-controller@38 {
@@ -85,6 +88,7 @@  led-controller@38 {
 		reg = <0>;
 		led-sources = <2>;
 		ti,led-mode = <1>;
+		led-max-microamp = <21800>;
 		label = ":backlight";
 		linux,default-trigger = "backlight";
 	};