@@ -23,11 +23,11 @@
#define LM3532_REG_PWM_B_CFG 0x14
#define LM3532_REG_PWM_C_CFG 0x15
#define LM3532_REG_ZONE_CFG_A 0x16
-#define LM3532_REG_CTRL_A_BRT 0x17
+#define LM3532_REG_CTRL_A_FS_CURR 0x17
#define LM3532_REG_ZONE_CFG_B 0x18
-#define LM3532_REG_CTRL_B_BRT 0x19
+#define LM3532_REG_CTRL_B_FS_CURR 0x19
#define LM3532_REG_ZONE_CFG_C 0x1a
-#define LM3532_REG_CTRL_C_BRT 0x1b
+#define LM3532_REG_CTRL_C_FS_CURR 0x1b
#define LM3532_REG_ENABLE 0x1d
#define LM3532_ALS_CONFIG 0x23
#define LM3532_REG_ZN_0_HI 0x60
@@ -38,6 +38,9 @@
#define LM3532_REG_ZN_2_LO 0x65
#define LM3532_REG_ZN_3_HI 0x66
#define LM3532_REG_ZN_3_LO 0x67
+#define LM3532_REG_ZONE_TRGT_A 0x70
+#define LM3532_REG_ZONE_TRGT_B 0x75
+#define LM3532_REG_ZONE_TRGT_C 0x7a
#define LM3532_REG_MAX 0x7e
/* Contorl Enable */
@@ -116,6 +119,7 @@ struct lm3532_als_data {
* @priv - Pointer the device data structure
* @control_bank - Control bank the LED is associated to
* @mode - Mode of the LED string
+ * @ctrl_brt_pointer - Zone target register that controls the sink
* @num_leds - Number of LED strings are supported in this array
* @led_strings - The LED strings supported in this array
* @label - LED label
@@ -126,6 +130,7 @@ struct lm3532_led {
int control_bank;
int mode;
+ int ctrl_brt_pointer;
int num_leds;
u32 led_strings[LM3532_MAX_CONTROL_BANKS];
char label[LED_MAX_NAME_SIZE];
@@ -168,11 +173,11 @@ static const struct reg_default lm3532_reg_defs[] = {
{LM3532_REG_PWM_B_CFG, 0x82},
{LM3532_REG_PWM_C_CFG, 0x82},
{LM3532_REG_ZONE_CFG_A, 0xf1},
- {LM3532_REG_CTRL_A_BRT, 0xf3},
+ {LM3532_REG_CTRL_A_FS_CURR, 0x13},
{LM3532_REG_ZONE_CFG_B, 0xf1},
- {LM3532_REG_CTRL_B_BRT, 0xf3},
+ {LM3532_REG_CTRL_B_FS_CURR, 0x13},
{LM3532_REG_ZONE_CFG_C, 0xf1},
- {LM3532_REG_CTRL_C_BRT, 0xf3},
+ {LM3532_REG_CTRL_C_FS_CURR, 0x13},
{LM3532_REG_ENABLE, 0xf8},
{LM3532_ALS_CONFIG, 0x44},
{LM3532_REG_ZN_0_HI, 0x35},
@@ -339,8 +344,8 @@ static int lm3532_brightness_set(struct led_classdev *led_cdev,
if (ret)
goto unlock;
- brightness_reg = LM3532_REG_CTRL_A_BRT + led->control_bank * 2;
- brt_val = brt_val / LM3532_BRT_VAL_ADJUST;
+ brightness_reg = LM3532_REG_ZONE_TRGT_A + led->control_bank * 5 +
+ (led->ctrl_brt_pointer >> 2);
ret = regmap_write(led->priv->regmap, brightness_reg, brt_val);
@@ -356,8 +361,30 @@ static int lm3532_init_registers(struct lm3532_led *led)
unsigned int output_cfg_val = 0;
unsigned int output_cfg_shift = 0;
unsigned int output_cfg_mask = 0;
+ unsigned int brightness_config_reg;
+ unsigned int brightness_config_val;
int ret, i;
+ if (drvdata->enable_gpio)
+ gpiod_direction_output(drvdata->enable_gpio, 1);
+
+ brightness_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2;
+ /*
+ * This could be hard coded to the default value but the control
+ * brightness register may have changed during boot.
+ */
+ ret = regmap_read(drvdata->regmap, brightness_config_reg,
+ &led->ctrl_brt_pointer);
+ if (ret)
+ return ret;
+
+ led->ctrl_brt_pointer &= LM3532_ZONE_MASK;
+ brightness_config_val = led->ctrl_brt_pointer | led->mode;
+ ret = regmap_write(drvdata->regmap, brightness_config_reg,
+ brightness_config_val);
+ if (ret)
+ return ret;
+
for (i = 0; i < led->num_leds; i++) {
output_cfg_shift = led->led_strings[i] * 2;
output_cfg_val |= (led->control_bank << output_cfg_shift);
@@ -382,7 +409,6 @@ static int lm3532_als_configure(struct lm3532_data *priv,
struct lm3532_als_data *als = priv->als_data;
u32 als_vmin, als_vmax, als_vstep;
int zone_reg = LM3532_REG_ZN_0_HI;
- int brightnes_config_reg;
int ret;
int i;
@@ -411,14 +437,7 @@ static int lm3532_als_configure(struct lm3532_data *priv,
als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) |
(als->als_input_mode << LM3532_ALS_SEL_SHIFT));
- ret = regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config);
- if (ret)
- return ret;
-
- brightnes_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2;
-
- return regmap_update_bits(priv->regmap, brightnes_config_reg,
- LM3532_I2C_CTRL, LM3532_ALS_CTRL);
+ return regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config);
}
static int lm3532_parse_als(struct lm3532_data *priv)
@@ -634,9 +653,6 @@ static int lm3532_probe(struct i2c_client *client,
return ret;
}
- if (drvdata->enable_gpio)
- gpiod_direction_output(drvdata->enable_gpio, 1);
-
return ret;
}
Fix the brightness control for I2C mode. Instead of changing the full scale current register update the ALS target register for the appropriate banks. In addition clean up some code errors and random misspellings found during coding. Tested on Droid4 as well as LM3532 EVM connected to a BeagleBoneBlack Fixes: e37a7f8d77e1 ("leds: lm3532: Introduce the lm3532 LED driver") Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dan Murphy <dmurphy@ti.com> --- v2 - Separated out random fixes and brightness control fix - https://lore.kernel.org/patchwork/patch/1109502/ drivers/leds/leds-lm3532.c | 56 ++++++++++++++++++++++++-------------- 1 file changed, 36 insertions(+), 20 deletions(-) -- 2.22.0.214.g8dca754b1e