diff mbox series

[v2,08/15] arm64: dts: sdm845: thermal: Add interrupt support

Message ID 32c755a9b9959b358e99d3b0957c283a6c6f0e89.1566907161.git.amit.kucheria@linaro.org
State New
Headers show
Series None | expand

Commit Message

Amit Kucheria Aug. 27, 2019, 12:14 p.m. UTC 
Register upper-lower interrupts for each of the two tsens controllers.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 88 +++++++++++++++-------------
 1 file changed, 46 insertions(+), 42 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 4babff5f19b5c..fdd74c39b744e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2386,6 +2386,8 @@ 
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -2394,6 +2396,8 @@ 
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -2712,8 +2716,8 @@ 
 
 	thermal-zones {
 		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -2756,8 +2760,8 @@ 
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -2800,8 +2804,8 @@ 
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -2844,8 +2848,8 @@ 
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -2888,8 +2892,8 @@ 
 		};
 
 		cpu4-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -2932,8 +2936,8 @@ 
 		};
 
 		cpu5-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -2976,8 +2980,8 @@ 
 		};
 
 		cpu6-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -3020,8 +3024,8 @@ 
 		};
 
 		cpu7-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -3064,8 +3068,8 @@ 
 		};
 
 		aoss0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -3079,8 +3083,8 @@ 
 		};
 
 		cluster0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -3099,8 +3103,8 @@ 
 		};
 
 		cluster1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -3119,8 +3123,8 @@ 
 		};
 
 		gpu-thermal-top {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -3134,8 +3138,8 @@ 
 		};
 
 		gpu-thermal-bottom {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -3149,8 +3153,8 @@ 
 		};
 
 		aoss1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -3164,8 +3168,8 @@ 
 		};
 
 		q6-modem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -3179,8 +3183,8 @@ 
 		};
 
 		mem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -3194,8 +3198,8 @@ 
 		};
 
 		wlan-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -3209,8 +3213,8 @@ 
 		};
 
 		q6-hvx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -3224,8 +3228,8 @@ 
 		};
 
 		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -3239,8 +3243,8 @@ 
 		};
 
 		video-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -3254,8 +3258,8 @@ 
 		};
 
 		modem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 7>;