diff mbox series

[v3,10/15] arm64: dts: msm8998: thermal: Add interrupt support

Message ID 9ebdef6e64db5840d69d9b2f66c5ecda274bbc0b.1568185732.git.amit.kucheria@linaro.org
State New
Headers show
Series thermal: qcom: tsens: Add interrupt support | expand

Commit Message

Amit Kucheria Sept. 11, 2019, 7:16 a.m. UTC 
Register upper-lower interrupts for each of the two tsens controllers.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 82 ++++++++++++++-------------
 1 file changed, 42 insertions(+), 40 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c13ed7aeb1e0..1e2f77b38f2c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -440,8 +440,8 @@ 
 
 	thermal-zones {
 		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -461,8 +461,8 @@ 
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -482,8 +482,8 @@ 
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -503,8 +503,8 @@ 
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -524,8 +524,8 @@ 
 		};
 
 		cpu4-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -545,8 +545,8 @@ 
 		};
 
 		cpu5-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -566,8 +566,8 @@ 
 		};
 
 		cpu6-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -587,8 +587,8 @@ 
 		};
 
 		cpu7-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -608,8 +608,8 @@ 
 		};
 
 		gpu-thermal-bottom {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -623,8 +623,8 @@ 
 		};
 
 		gpu-thermal-top {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -638,8 +638,8 @@ 
 		};
 
 		clust0-mhm-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -653,8 +653,8 @@ 
 		};
 
 		clust1-mhm-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -668,8 +668,8 @@ 
 		};
 
 		cluster1-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -683,8 +683,8 @@ 
 		};
 
 		modem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -698,8 +698,8 @@ 
 		};
 
 		mem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -713,8 +713,8 @@ 
 		};
 
 		wlan-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -728,8 +728,8 @@ 
 		};
 
 		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -743,8 +743,8 @@ 
 		};
 
 		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -758,8 +758,8 @@ 
 		};
 
 		multimedia-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -845,8 +845,9 @@ 
 			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
 			reg = <0x10ab000 0x1000>, /* TM */
 			      <0x10aa000 0x1000>; /* SROT */
-
 			#qcom,sensors = <14>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -854,8 +855,9 @@ 
 			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
 			reg = <0x10ae000 0x1000>, /* TM */
 			      <0x10ad000 0x1000>; /* SROT */
-
 			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};