| Message ID | 20191006005949.30849-1-linus.walleij@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | pinctrl: intel: Pass irqchip when adding gpiochip | expand |
On Sun, Oct 06, 2019 at 02:59:49AM +0200, Linus Walleij wrote: > We need to convert all old gpio irqchips to pass the irqchip > setup along when adding the gpio_chip. For more info see > drivers/gpio/TODO. > > This is an unchained irqchip so we use the method from > drivers/gpio/gpio-mt7621.c that also requests its interrupt > instead if chaining the interrupt handler. One comment below, after addressing, Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > Cc: Mika Westerberg <mika.westerberg@linux.intel.com> > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > This is based on Andy's patch to dynamically allocate the > irqchio. Mika maybe you want to queue it with the rest of > the stuff so you can sync fixes and new development? My Rb tag Mika may use for fixes stuff in this cycle. > --- > drivers/pinctrl/intel/pinctrl-intel.c | 52 ++++++++++++++++----------- > 1 file changed, 31 insertions(+), 21 deletions(-) > > diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c > index bc013599a9a3..d63566e57f4c 100644 > --- a/drivers/pinctrl/intel/pinctrl-intel.c > +++ b/drivers/pinctrl/intel/pinctrl-intel.c > @@ -1206,6 +1206,37 @@ static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq) > pctrl->irqchip.irq_set_wake = intel_gpio_irq_wake; > pctrl->irqchip.flags = IRQCHIP_MASK_ON_SUSPEND; > > + /* > + * We need to request the interrupt here (instead of using a > + * chained handler) because on some platforms several GPIO > + * controllers share the same interrupt line. > + */ > + ret = devm_request_irq(pctrl->dev, irq, intel_gpio_irq, > + IRQF_SHARED | IRQF_NO_THREAD, > + dev_name(pctrl->dev), pctrl); > + if (!ret) { Why not positive condition? > + struct gpio_irq_chip *girq; > + > + girq = &pctrl->chip.irq; > + girq->chip = &pctrl->irqchip; > + /* > + * This is an unchained interrupt. Compare to > + * drivers/gpio/gpio-mt7621.c that also does this: > + * assign no parents. > + * > + * FIXME: make the gpiolib flag this and handle unchained > + * GPIO interrupts better if need be. > + */ > + girq->parent_handler = NULL; > + girq->num_parents = 0; > + girq->parents = NULL; > + girq->default_type = IRQ_TYPE_NONE; > + girq->handler = handle_bad_irq; > + } else { > + /* Skip irqchip, register gpiochip anyway */ > + dev_err(pctrl->dev, "failed to request interrupt\n"); > + } > + > ret = devm_gpiochip_add_data(pctrl->dev, &pctrl->chip, pctrl); > if (ret) { > dev_err(pctrl->dev, "failed to register gpiochip\n"); > @@ -1222,27 +1253,6 @@ static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq) > } > } > > - /* > - * We need to request the interrupt here (instead of providing chip > - * to the irq directly) because on some platforms several GPIO > - * controllers share the same interrupt line. > - */ > - ret = devm_request_irq(pctrl->dev, irq, intel_gpio_irq, > - IRQF_SHARED | IRQF_NO_THREAD, > - dev_name(pctrl->dev), pctrl); > - if (ret) { > - dev_err(pctrl->dev, "failed to request interrupt\n"); > - return ret; > - } > - > - ret = gpiochip_irqchip_add(&pctrl->chip, &pctrl->irqchip, 0, > - handle_bad_irq, IRQ_TYPE_NONE); > - if (ret) { > - dev_err(pctrl->dev, "failed to add irqchip\n"); > - return ret; > - } > - > - gpiochip_set_chained_irqchip(&pctrl->chip, &pctrl->irqchip, irq, NULL); > return 0; > } > > -- > 2.21.0 > -- With Best Regards, Andy Shevchenko
On Sun, Oct 06, 2019 at 02:59:49AM +0200, Linus Walleij wrote: > We need to convert all old gpio irqchips to pass the irqchip > setup along when adding the gpio_chip. For more info see > drivers/gpio/TODO. > > This is an unchained irqchip so we use the method from > drivers/gpio/gpio-mt7621.c that also requests its interrupt > instead if chaining the interrupt handler. > > Cc: Mika Westerberg <mika.westerberg@linux.intel.com> > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > This is based on Andy's patch to dynamically allocate the > irqchio. Mika maybe you want to queue it with the rest of > the stuff so you can sync fixes and new development? Sure, I can take it. I suppose there will be v2 coming so waiting for that :)
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index bc013599a9a3..d63566e57f4c 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -1206,6 +1206,37 @@ static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq) pctrl->irqchip.irq_set_wake = intel_gpio_irq_wake; pctrl->irqchip.flags = IRQCHIP_MASK_ON_SUSPEND; + /* + * We need to request the interrupt here (instead of using a + * chained handler) because on some platforms several GPIO + * controllers share the same interrupt line. + */ + ret = devm_request_irq(pctrl->dev, irq, intel_gpio_irq, + IRQF_SHARED | IRQF_NO_THREAD, + dev_name(pctrl->dev), pctrl); + if (!ret) { + struct gpio_irq_chip *girq; + + girq = &pctrl->chip.irq; + girq->chip = &pctrl->irqchip; + /* + * This is an unchained interrupt. Compare to + * drivers/gpio/gpio-mt7621.c that also does this: + * assign no parents. + * + * FIXME: make the gpiolib flag this and handle unchained + * GPIO interrupts better if need be. + */ + girq->parent_handler = NULL; + girq->num_parents = 0; + girq->parents = NULL; + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_bad_irq; + } else { + /* Skip irqchip, register gpiochip anyway */ + dev_err(pctrl->dev, "failed to request interrupt\n"); + } + ret = devm_gpiochip_add_data(pctrl->dev, &pctrl->chip, pctrl); if (ret) { dev_err(pctrl->dev, "failed to register gpiochip\n"); @@ -1222,27 +1253,6 @@ static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq) } } - /* - * We need to request the interrupt here (instead of providing chip - * to the irq directly) because on some platforms several GPIO - * controllers share the same interrupt line. - */ - ret = devm_request_irq(pctrl->dev, irq, intel_gpio_irq, - IRQF_SHARED | IRQF_NO_THREAD, - dev_name(pctrl->dev), pctrl); - if (ret) { - dev_err(pctrl->dev, "failed to request interrupt\n"); - return ret; - } - - ret = gpiochip_irqchip_add(&pctrl->chip, &pctrl->irqchip, 0, - handle_bad_irq, IRQ_TYPE_NONE); - if (ret) { - dev_err(pctrl->dev, "failed to add irqchip\n"); - return ret; - } - - gpiochip_set_chained_irqchip(&pctrl->chip, &pctrl->irqchip, irq, NULL); return 0; }
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. This is an unchained irqchip so we use the method from drivers/gpio/gpio-mt7621.c that also requests its interrupt instead if chaining the interrupt handler. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- This is based on Andy's patch to dynamically allocate the irqchio. Mika maybe you want to queue it with the rest of the stuff so you can sync fixes and new development? --- drivers/pinctrl/intel/pinctrl-intel.c | 52 ++++++++++++++++----------- 1 file changed, 31 insertions(+), 21 deletions(-) -- 2.21.0