diff mbox series

[5.3,145/166] net: dsa: rtl8366: Check VLAN ID and not ports

Message ID 20191006171225.179123080@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Oct. 6, 2019, 5:21 p.m. UTC 
From: Linus Walleij <linus.walleij@linaro.org>


[ Upstream commit e8521e53cca584ddf8ec4584d3c550a6c65f88c4 ]

There has been some confusion between the port number and
the VLAN ID in this driver. What we need to check for
validity is the VLAN ID, nothing else.

The current confusion came from assigning a few default
VLANs for default routing and we need to rewrite that
properly.

Instead of checking if the port number is a valid VLAN
ID, check the actual VLAN IDs passed in to the callback
one by one as expected.

Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/dsa/rtl8366.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
diff mbox series

Patch

--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -339,10 +339,12 @@  int rtl8366_vlan_prepare(struct dsa_swit
 			 const struct switchdev_obj_port_vlan *vlan)
 {
 	struct realtek_smi *smi = ds->priv;
+	u16 vid;
 	int ret;
 
-	if (!smi->ops->is_vlan_valid(smi, port))
-		return -EINVAL;
+	for (vid = vlan->vid_begin; vid < vlan->vid_end; vid++)
+		if (!smi->ops->is_vlan_valid(smi, vid))
+			return -EINVAL;
 
 	dev_info(smi->dev, "prepare VLANs %04x..%04x\n",
 		 vlan->vid_begin, vlan->vid_end);
@@ -370,8 +372,9 @@  void rtl8366_vlan_add(struct dsa_switch
 	u16 vid;
 	int ret;
 
-	if (!smi->ops->is_vlan_valid(smi, port))
-		return;
+	for (vid = vlan->vid_begin; vid < vlan->vid_end; vid++)
+		if (!smi->ops->is_vlan_valid(smi, vid))
+			return;
 
 	dev_info(smi->dev, "add VLAN on port %d, %s, %s\n",
 		 port,