@@ -411,6 +411,14 @@ config USB_OHCI_HCD_SPEAR
Enables support for the on-chip OHCI controller on
ST SPEAr chips.
+config USB_OHCI_HCD_AT91
+ tristate "Support for Atmel on-chip OHCI USB controller"
+ depends on USB_OHCI_HCD && ARCH_AT91
+ default y
+ ---help---
+ Enables support for the on-chip OHCI controller on
+ Atmel chips.
+
config USB_OHCI_HCD_OMAP3
tristate "OHCI support for OMAP3 and later chips"
depends on (ARCH_OMAP3 || ARCH_OMAP4)
@@ -50,6 +50,7 @@ obj-$(CONFIG_USB_OHCI_EXYNOS) += ohci-exynos.o
obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o
obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o
obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o
+obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
@@ -13,16 +13,25 @@
*/
#include <linux/clk.h>
-#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
#include <linux/platform_data/atmel.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
#include <mach/hardware.h>
#include <asm/gpio.h>
#include <mach/cpu.h>
+
+#include "ohci.h"
+
#ifndef CONFIG_ARCH_AT91
#error "CONFIG_ARCH_AT91 must be defined."
#endif
@@ -32,6 +41,12 @@
for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
/* interface and function clocks; sometimes also an AHB clock */
+
+#define DRIVER_DESC "OHCI Atmel driver"
+
+static const char hcd_name[] = "ohci-atmel";
+
+static struct hc_driver __read_mostly ohci_at91_hc_driver;
static struct clk *iclk, *fclk, *hclk;
static int clocked;
@@ -111,6 +126,8 @@ static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
static int usb_hcd_at91_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
+ struct at91_usbh_data *board;
+ struct ohci_hcd *ohci;
int retval;
struct usb_hcd *hcd = NULL;
@@ -163,8 +180,11 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
goto err5;
}
+ board = hcd->self.controller->platform_data;
+ ohci = hcd_to_ohci(hcd);
+ ohci->num_ports = board->ports;
at91_start_hc(pdev);
- ohci_hcd_init(hcd_to_ohci(hcd));
+ ohci_setup(hcd);
retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
if (retval == 0)
@@ -221,36 +241,6 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
}
/*-------------------------------------------------------------------------*/
-
-static int
-ohci_at91_reset (struct usb_hcd *hcd)
-{
- struct at91_usbh_data *board = hcd->self.controller->platform_data;
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
- if ((ret = ohci_init(ohci)) < 0)
- return ret;
-
- ohci->num_ports = board->ports;
- return 0;
-}
-
-static int
-ohci_at91_start (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
- if ((ret = ohci_run(ohci)) < 0) {
- dev_err(hcd->self.controller, "can't start %s\n",
- hcd->self.bus_name);
- ohci_stop(hcd);
- return ret;
- }
- return 0;
-}
-
static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
{
if (!valid_port(port))
@@ -413,51 +403,6 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/*-------------------------------------------------------------------------*/
-static const struct hc_driver ohci_at91_hc_driver = {
- .description = hcd_name,
- .product_desc = "AT91 OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .reset = ohci_at91_reset,
- .start = ohci_at91_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_at91_hub_status_data,
- .hub_control = ohci_at91_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
{
struct platform_device *pdev = data;
@@ -686,7 +631,7 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
* REVISIT: some boards will be able to turn VBUS off...
*/
if (at91_suspend_entering_slow_clock()) {
- ohci_usb_reset (ohci);
+ ohci_restart(ohci);
/* flush the writes */
(void) ohci_readl (ohci, &ohci->regs->control);
at91_stop_clock();
@@ -727,3 +672,37 @@ static struct platform_driver ohci_hcd_at91_driver = {
.of_match_table = of_match_ptr(at91_ohci_dt_ids),
},
};
+
+static int __init ohci_at91_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+ ohci_init_driver(&ohci_at91_hc_driver, NULL);
+
+ /*
+ * The Atmel HW has some unusual quirks, which require Atmel-specific
+ * workarounds. We override certain hc_driver functions here to
+ * achieve that. We explicitly do not enhance ohci_driver_overrides to
+ * allow this more easily, since this is an unusual case, and we don't
+ * want to encourage others to override these functions by making it
+ * too easy.
+ */
+
+ ohci_at91_hc_driver.hub_status_data = ohci_at91_hub_status_data;
+ ohci_at91_hc_driver.hub_control = ohci_at91_hub_control;
+
+ return platform_driver_register(&ohci_hcd_at91_driver);
+}
+module_init(ohci_at91_init);
+
+static void __exit ohci_at91_cleanup(void)
+{
+ platform_driver_unregister(&ohci_hcd_at91_driver);
+}
+module_exit(ohci_at91_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
@@ -1188,11 +1188,6 @@ MODULE_LICENSE ("GPL");
#define EP93XX_PLATFORM_DRIVER ohci_hcd_ep93xx_driver
#endif
-#ifdef CONFIG_ARCH_AT91
-#include "ohci-at91.c"
-#define AT91_PLATFORM_DRIVER ohci_hcd_at91_driver
-#endif
-
#ifdef CONFIG_ARCH_LPC32XX
#include "ohci-nxp.c"
#define NXP_PLATFORM_DRIVER usb_hcd_nxp_driver
@@ -1244,6 +1239,7 @@ MODULE_LICENSE ("GPL");
!IS_ENABLED(CONFIG_USB_OHCI_HCD_OMAP1) && \
!IS_ENABLED(CONFIG_USB_OHCI_HCD_OMAP3) && \
!IS_ENABLED(CONFIG_USB_OHCI_HCD_SPEAR) && \
+ !IS_ENABLED(CONFIG_USB_OHCI_HCD_AT91) && \
!defined(PLATFORM_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
!defined(SA1111_DRIVER) && \
@@ -1252,7 +1248,6 @@ MODULE_LICENSE ("GPL");
!defined(TMIO_OHCI_DRIVER) && \
!defined(S3C2410_PLATFORM_DRIVER) && \
!defined(EP93XX_PLATFORM_DRIVER) && \
- !defined(AT91_PLATFORM_DRIVER) && \
!defined(NXP_PLATFORM_DRIVER) && \
!defined(DAVINCI_PLATFORM_DRIVER)
#error "missing bus glue for ohci-hcd"
@@ -1326,12 +1321,6 @@ static int __init ohci_hcd_mod_init(void)
goto error_ep93xx;
#endif
-#ifdef AT91_PLATFORM_DRIVER
- retval = platform_driver_register(&AT91_PLATFORM_DRIVER);
- if (retval < 0)
- goto error_at91;
-#endif
-
#ifdef NXP_PLATFORM_DRIVER
retval = platform_driver_register(&NXP_PLATFORM_DRIVER);
if (retval < 0)
@@ -1355,10 +1344,6 @@ static int __init ohci_hcd_mod_init(void)
platform_driver_unregister(&NXP_PLATFORM_DRIVER);
error_nxp:
#endif
-#ifdef AT91_PLATFORM_DRIVER
- platform_driver_unregister(&AT91_PLATFORM_DRIVER);
- error_at91:
-#endif
#ifdef EP93XX_PLATFORM_DRIVER
platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
error_ep93xx:
@@ -1410,9 +1395,6 @@ static void __exit ohci_hcd_mod_exit(void)
#ifdef NXP_PLATFORM_DRIVER
platform_driver_unregister(&NXP_PLATFORM_DRIVER);
#endif
-#ifdef AT91_PLATFORM_DRIVER
- platform_driver_unregister(&AT91_PLATFORM_DRIVER);
-#endif
#ifdef EP93XX_PLATFORM_DRIVER
platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
#endif
Separate the TI OHCI Atmel host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Cc: linux-usb@vger.kernel.org --- drivers/usb/host/Kconfig | 8 +++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ohci-at91.c | 135 ++++++++++++++++++------------------------ drivers/usb/host/ohci-hcd.c | 20 +------ 4 files changed, 67 insertions(+), 97 deletions(-)