@@ -23,7 +23,6 @@
#include <linux/spinlock.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -26,13 +26,16 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <linux/sizes.h>
#include <asm/hardware/sa1111.h>
+#ifdef CONFIG_ARCH_SA1100
+#include <mach/hardware.h>
+#endif
+
/* SA1111 IRQs */
#define IRQ_GPAIN0 (0)
#define IRQ_GPAIN1 (1)
@@ -14,6 +14,7 @@
#include <linux/dm9000.h>
#include <linux/leds.h>
+#include <linux/soc/pxa/cpu.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -32,6 +33,7 @@
#undef GPIO88_GPIO
#undef GPIO89_GPIO
#include <mach/audio.h>
+#include <mach/addr-map.h>
#include <linux/platform_data/video-pxafb.h>
#include <mach/smemc.h>
@@ -40,6 +40,8 @@
#include <linux/spi/spi_gpio.h>
#include <linux/spi/tdo24m.h>
+#include <linux/soc/pxa/cpu.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
@@ -13,7 +13,6 @@
#include <linux/interrupt.h>
#include <linux/gpio/machine.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-pxa.h>
@@ -25,7 +25,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "pxa27x.h"
@@ -13,6 +13,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
+#include <linux/soc/pxa/cpu.h>
#include <asm/mach-types.h>
#include <linux/sizes.h>
@@ -13,7 +13,6 @@
#include <linux/gpio.h>
#include <linux/etherdevice.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <linux/sizes.h>
#include <asm/system_info.h>
#include <asm/mach/arch.h>
@@ -39,7 +39,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -19,7 +19,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <mach/corgi.h>
#include <mach/pxa2xx-regs.h>
@@ -17,6 +17,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
#include "csb726.h"
#include "pxa27x.h"
#include <linux/platform_data/mmc-pxamci.h>
@@ -8,6 +8,7 @@
#include <linux/dmaengine.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/platform_data/i2c-pxa.h>
+#include <linux/soc/pxa/cpu.h>
#include "udc.h"
#include <linux/platform_data/usb-pxa3xx-ulpi.h>
@@ -19,7 +20,6 @@
#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/platform_data/media/camera-pxa.h>
#include <mach/audio.h>
-#include <mach/hardware.h>
#include <linux/platform_data/mmp_dma.h>
#include <linux/platform_data/mtd-nand-pxa3xx.h>
@@ -29,7 +29,6 @@
#include "pxa27x.h"
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/hardware.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/platform_data/media/camera-pxa.h>
@@ -17,11 +17,12 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/soc/pxa/cpu.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
+#include <mach/addr-map.h>
#include <mach/irqs.h>
#include <mach/reset.h>
#include <mach/smemc.h>
@@ -28,7 +28,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <linux/sizes.h>
@@ -37,11 +37,11 @@
#include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/i2c-pxa.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "pxa27x.h"
+#include <mach/addr-map.h>
#include <mach/hx4700.h>
#include <linux/platform_data/irda-pxaficp.h>
@@ -22,7 +22,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
new file mode 100644
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ */
+#ifndef __ASM_MACH_PXA_REGS_H
+#define __ASM_MACH_PXA_REGS_H
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0 0xfe000000
+#define UNCACHED_PHYS_0_SIZE 0x00100000
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+
+#ifndef __ASSEMBLY__
+# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+ especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y) \
+ (*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
+
+# define __PREG(x) (io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x) io_p2v(x)
+# define __PREG(x) io_v2p(x)
+
+#endif
+
+
+#endif
@@ -11,7 +11,7 @@
#ifndef __PXA2XX_REGS_H
#define __PXA2XX_REGS_H
-#include <mach/hardware.h>
+#include "pxa-regs.h"
/*
* Power Manager
@@ -10,7 +10,7 @@
#ifndef __ASM_ARCH_PXA3XX_REGS_H
#define __ASM_ARCH_PXA3XX_REGS_H
-#include <mach/hardware.h>
+#include "pxa-regs.h"
/*
* Oscillator Configuration Register (OSCC)
@@ -2,7 +2,7 @@
#ifndef __ASM_ARCH_REGS_AC97_H
#define __ASM_ARCH_REGS_AC97_H
-#include <mach/hardware.h>
+#include "pxa-regs.h"
/*
* AC97 Controller registers
@@ -2,7 +2,7 @@
#ifndef __ASM_MACH_REGS_OST_H
#define __ASM_MACH_REGS_OST_H
-#include <mach/hardware.h>
+#include "pxa-regs.h"
/*
* OS Timer & Match Registers
@@ -11,6 +11,7 @@
#ifndef _TRIPEPS4_H_
#define _TRIPEPS4_H_
+#include <mach/addr-map.h>
#include "irqs.h" /* PXA_GPIO_TO_IRQ */
/* physical memory regions */
@@ -17,13 +17,14 @@
#include <linux/irq.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/soc/pxa/cpu.h>
#include <asm/exception.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
#include "generic.h"
+#include "pxa-regs.h"
#define ICIP (0x000)
#define ICMR (0x004)
@@ -31,7 +31,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -28,7 +28,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <linux/sizes.h>
@@ -39,6 +38,7 @@
#include "pxa27x.h"
#include "lpd270.h"
+#include <mach/addr-map.h>
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
@@ -34,7 +34,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <linux/sizes.h>
@@ -30,12 +30,12 @@
#include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/i2c-pxa.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/system_info.h>
#include "pxa27x.h"
+#include <mach/addr-map.h>
#include <mach/magician.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
@@ -35,7 +35,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <linux/sizes.h>
@@ -52,6 +51,7 @@
#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/keypad-pxa27x.h>
+#include <mach/addr-map.h>
#include <mach/smemc.h>
#include "generic.h"
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/syscore_ops.h>
+#include <linux/soc/pxa/cpu.h>
#include <mach/pxa2xx-regs.h>
#include "mfp-pxa2xx.h"
@@ -16,7 +16,6 @@
#include <linux/io.h>
#include <linux/syscore_ops.h>
-#include <mach/hardware.h>
#include "mfp-pxa3xx.h"
#include <mach/pxa3xx-regs.h>
@@ -30,7 +30,6 @@
#include <linux/mtd/sharpsl.h>
#include <linux/memblock.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>
new file mode 100644
@@ -0,0 +1 @@
+#include <mach/pxa-regs.h>
@@ -26,14 +26,15 @@
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/platform_data/mmp_dma.h>
+#include <linux/soc/pxa/cpu.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
#include "pxa25x.h"
#include <mach/reset.h>
#include "pm.h"
+#include <mach/addr-map.h>
#include <mach/smemc.h>
#include "generic.h"
@@ -2,7 +2,7 @@
#ifndef __MACH_PXA25x_H
#define __MACH_PXA25x_H
-#include <mach/hardware.h>
+#include <mach/addr-map.h>
#include <mach/pxa2xx-regs.h>
#include "mfp-pxa25x.h"
#include <mach/irqs.h>
@@ -2,6 +2,8 @@
#ifndef _ASM_ARCH_PXA27X_UDC_H
#define _ASM_ARCH_PXA27X_UDC_H
+#include "pxa-regs.h"
+
#ifdef _ASM_ARCH_PXA25X_UDC_H
#error You cannot include both PXA25x and PXA27x UDC support
#endif
@@ -23,9 +23,9 @@
#include <linux/irq.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/platform_data/mmp_dma.h>
+#include <linux/soc/pxa/cpu.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/suspend.h>
#include <mach/irqs.h>
@@ -33,6 +33,7 @@
#include <mach/reset.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "pm.h"
+#include <mach/addr-map.h>
#include <mach/smemc.h>
#include "generic.h"
@@ -3,7 +3,7 @@
#define __MACH_PXA27x_H
#include <linux/suspend.h>
-#include <mach/hardware.h>
+#include <mach/addr-map.h>
#include <mach/pxa2xx-regs.h>
#include "mfp-pxa27x.h"
#include <mach/irqs.h>
@@ -12,7 +12,6 @@
#include <linux/device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include "mfp-pxa25x.h"
#include <mach/reset.h>
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/soc/pxa/cpu.h>
#include "pxa300.h"
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/soc/pxa/cpu.h>
#include "pxa320.h"
@@ -21,8 +21,8 @@
#include <linux/clk.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
+#include <linux/soc/pxa/cpu.h>
-#include <mach/hardware.h>
#include "regs-u2d.h"
#include <linux/platform_data/usb-pxa3xx-ulpi.h>
@@ -24,14 +24,15 @@
#include <linux/syscore_ops.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/platform_data/mmp_dma.h>
+#include <linux/soc/pxa/cpu.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
-#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "pm.h"
+#include <mach/addr-map.h>
#include <mach/smemc.h>
#include <mach/irqs.h>
@@ -2,7 +2,7 @@
#ifndef __MACH_PXA3XX_H
#define __MACH_PXA3XX_H
-#include <mach/hardware.h>
+#include <mach/addr-map.h>
#include <mach/pxa3xx-regs.h>
#include <mach/irqs.h>
@@ -13,6 +13,7 @@
#include <linux/irq.h>
#include <linux/gpio-pxa.h>
#include <linux/platform_device.h>
+#include <linux/soc/pxa/cpu.h>
#include "pxa930.h"
@@ -2,7 +2,7 @@
#ifndef __ASM_MACH_REGS_RTC_H
#define __ASM_MACH_REGS_RTC_H
-#include <mach/hardware.h>
+#include "pxa-regs.h"
/*
* Real Time Clock
@@ -2,6 +2,8 @@
#ifndef __ASM_ARCH_REGS_UART_H
#define __ASM_ARCH_REGS_UART_H
+#include "pxa-regs.h"
+
/*
* UARTs
*/
@@ -13,7 +13,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
#include <mach/smemc.h>
#include <mach/pxa2xx-regs.h>
@@ -8,8 +8,8 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/syscore_ops.h>
+#include <linux/soc/pxa/cpu.h>
-#include <mach/hardware.h>
#include <mach/smemc.h>
#ifdef CONFIG_PM
@@ -18,7 +18,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <mach/spitz.h>
#include "pxa27x.h"
@@ -11,7 +11,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
@@ -24,8 +24,8 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
#include "pxa25x.h"
+#include <mach/addr-map.h>
#include <mach/smemc.h>
#include "generic.h"
@@ -20,6 +20,7 @@
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
+#include <linux/soc/pxa/cpu.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -2,6 +2,8 @@
#ifndef __ASM_ARCH_ZYLONITE_H
#define __ASM_ARCH_ZYLONITE_H
+#include <linux/soc/pxa/cpu.h>
+
#define ZYLONITE_ETH_PHYS 0x14000000
#define EXT_GPIO(x) (128 + (x))
@@ -17,6 +17,7 @@
#include <linux/platform_data/i2c-pxa.h>
#include <linux/platform_data/pca953x.h>
#include <linux/gpio.h>
+#include <linux/soc/pxa/cpu.h>
#include "pxa300.h"
#include "devices.h"
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/soc/pxa/cpu.h>
#include "pxa320.h"
#include "zylonite.h"
@@ -14,6 +14,7 @@
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
+#include <linux/soc/pxa/cpu.h>
#include <mach/smemc.h>
#include <mach/pxa3xx-regs.h>
@@ -24,6 +24,7 @@
#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
+#include <linux/soc/pxa/cpu.h>
#include <linux/io.h>
#include <mach/pxa2xx-regs.h>
@@ -8,6 +8,7 @@
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <linux/soc/pxa/cpu.h>
#include <linux/slab.h>
#include <linux/io.h>
@@ -15,7 +15,6 @@
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
#include <linux/platform_data/mouse-pxa930_trkball.h>
/* Trackball Controller Register Definitions */
@@ -21,9 +21,9 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/soc/pxa/cpu.h>
#include <linux/wm97xx.h>
-#include <mach/hardware.h>
#include <mach/mfp.h>
#include <mach/regs-ac97.h>
@@ -11,7 +11,6 @@
#include <linux/device.h>
#include <linux/leds.h>
-#include <mach/hardware.h>
#include <asm/hardware/locomo.h>
static void locomoled_brightness_set(struct led_classdev *led_cdev,
@@ -31,10 +31,10 @@
#include <linux/gfp.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/soc/pxa/cpu.h>
#include <linux/sizes.h>
-#include <mach/hardware.h>
#include <linux/platform_data/mmc-pxamci.h>
#include "pxamci.h"
@@ -16,8 +16,6 @@
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <mach/hardware.h>
-
#include <asm/mach/flash.h>
#define CACHELINESIZE 32
@@ -17,12 +17,13 @@
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/module.h>
+#include <linux/soc/pxa/cpu.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/pxa2xx-regs.h>
+#include <mach/addr-map.h>
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (89)
@@ -23,8 +23,8 @@
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
+#include <linux/soc/pxa/cpu.h>
-#include <mach/hardware.h>
#include <mach/smemc.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -7,9 +7,9 @@
*/
#include <linux/module.h>
+#include <linux/soc/pxa/cpu.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
int cmx255_pcmcia_init(void);
int cmx270_pcmcia_init(void);
@@ -15,7 +15,6 @@
#include <linux/platform_device.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/hardware/scoop.h>
@@ -17,7 +17,6 @@
#include <pcmcia/ss.h>
-#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -17,7 +17,6 @@
#include <linux/init.h>
#include <linux/delay.h>
-#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
@@ -47,8 +47,6 @@
#include <linux/spinlock.h>
#include <linux/timer.h>
-#include <mach/hardware.h>
-
#include "soc_common.h"
static irqreturn_t soc_common_pcmcia_interrupt(int irq, void *dev);
@@ -16,8 +16,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
-#include <mach/hardware.h>
-
#include "rtc-sa1100.h"
#define RTC_DEF_DIVIDER (32768 - 1)
@@ -36,8 +36,7 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/otg.h>
-
-#include <mach/hardware.h>
+#include <linux/soc/pxa/cpu.h>
#include "ohci.h"
@@ -57,10 +57,10 @@
#include <linux/console.h>
#include <linux/of_graph.h>
#include <linux/regulator/consumer.h>
+#include <linux/soc/pxa/cpu.h>
#include <video/of_display_timing.h>
#include <video/videomode.h>
-#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/div64.h>
@@ -35,7 +35,6 @@
#endif
#include <mach/reset.h>
-#include <mach/hardware.h>
static unsigned long oscr_freq;
static unsigned long sa1100wdt_users;
similarity index 75%
rename from arch/arm/mach-pxa/include/mach/hardware.h
rename to include/linux/soc/pxa/cpu.h
@@ -1,61 +1,16 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * arch/arm/mach-pxa/include/mach/hardware.h
- *
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*/
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/addr-map.h>
-
-/*
- * Workarounds for at least 2 errata so far require this.
- * The mapping is set in mach-pxa/generic.c.
- */
-#define UNCACHED_PHYS_0 0xfe000000
-#define UNCACHED_PHYS_0_SIZE 0x00100000
-
-/*
- * Intel PXA2xx internal register mapping:
- *
- * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
- * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
- * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
- * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
- * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
- *
- * Note that not all PXA2xx chips implement all those addresses, and the
- * kernel only maps the minimum needed range of this mapping.
- */
-#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
-#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
-
-#ifndef __ASSEMBLY__
-# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x)))
-
-/* With indexed regs we don't want to feed the index through io_p2v()
- especially if it is a variable, otherwise horrible code will result. */
-# define __REG2(x,y) \
- (*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
-
-# define __PREG(x) (io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x) io_p2v(x)
-# define __PREG(x) io_v2p(x)
-
-#endif
-
-#ifndef __ASSEMBLY__
+#ifndef __SOC_PXA_CPU_H
+#define __SOC_PXA_CPU_H
+#ifdef CONFIG_ARM
#include <asm/cputype.h>
+#endif
/*
* CPU Stepping CPU_ID JTAG_ID
@@ -294,12 +249,4 @@
__cpu_is_pxa93x(read_cpuid_id()); \
})
-
-/*
- * return current memory and LCD clock frequency in units of 10kHz
- */
-extern unsigned int get_memclk_frequency_10khz(void);
-
#endif
-
-#endif /* _ASM_ARCH_HARDWARE_H */
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
+#include <linux/soc/pxa/cpu.h>
#include <sound/pxa2xx-lib.h>
@@ -21,7 +21,7 @@
#include <sound/pxa2xx-lib.h>
#include <sound/dmaengine_pcm.h>
-#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
#include <mach/regs-ac97.h>
#include <mach/audio.h>
@@ -21,7 +21,7 @@
#include <sound/pxa2xx-lib.h>
#include <sound/dmaengine_pcm.h>
-#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
#include <mach/audio.h>
#include "pxa2xx-i2s.h"
@@ -21,7 +21,6 @@
#include <sound/jack.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <mach/audio.h>
#include <mach/z2.h>
The mach/hardware.h is included in lots of places, and it provides three different things on pxa: - the cpu_is_pxa* macros - an indirect inclusion of mach/addr-map.h - the __REG() and io_pv2() helper macros Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h headers, then change all the files that use mach/hardware.h to include the exact set of those three headers that they actually need, allowing for further more targeted cleanup. linux/soc/pxa/cpu.h can remain permanently exported and is now in a global location along with similar headers. pxa-regs.h and addr-map.h are only used in a very small number of drivers now and can be moved to arch/arm/mach-pxa/ directly when those drivers are to pass the necessary data as resources. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Mark Brown <broonie@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/common/locomo.c | 1 - arch/arm/common/sa1111.c | 5 +- arch/arm/mach-pxa/cm-x2xx.c | 2 + arch/arm/mach-pxa/cm-x300.c | 2 + arch/arm/mach-pxa/colibri-evalboard.c | 1 - arch/arm/mach-pxa/colibri-pxa270-income.c | 1 - arch/arm/mach-pxa/colibri-pxa300.c | 1 + arch/arm/mach-pxa/colibri-pxa3xx.c | 1 - arch/arm/mach-pxa/corgi.c | 1 - arch/arm/mach-pxa/corgi_pm.c | 1 - arch/arm/mach-pxa/csb726.c | 1 + arch/arm/mach-pxa/devices.c | 2 +- arch/arm/mach-pxa/ezx.c | 1 - arch/arm/mach-pxa/generic.c | 3 +- arch/arm/mach-pxa/gumstix.c | 1 - arch/arm/mach-pxa/hx4700.c | 2 +- arch/arm/mach-pxa/idp.c | 1 - arch/arm/mach-pxa/include/mach/pxa-regs.h | 52 ++++++++++++++++ arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 2 +- arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 2 +- arch/arm/mach-pxa/include/mach/regs-ac97.h | 2 +- arch/arm/mach-pxa/include/mach/regs-ost.h | 2 +- arch/arm/mach-pxa/include/mach/trizeps4.h | 1 + arch/arm/mach-pxa/irq.c | 3 +- arch/arm/mach-pxa/littleton.c | 1 - arch/arm/mach-pxa/lpd270.c | 2 +- arch/arm/mach-pxa/lubbock.c | 1 - arch/arm/mach-pxa/magician.c | 2 +- arch/arm/mach-pxa/mainstone.c | 2 +- arch/arm/mach-pxa/mfp-pxa2xx.c | 1 + arch/arm/mach-pxa/mfp-pxa3xx.c | 1 - arch/arm/mach-pxa/poodle.c | 1 - arch/arm/mach-pxa/pxa-regs.h | 1 + arch/arm/mach-pxa/pxa25x.c | 3 +- arch/arm/mach-pxa/pxa25x.h | 2 +- arch/arm/mach-pxa/pxa27x-udc.h | 2 + arch/arm/mach-pxa/pxa27x.c | 3 +- arch/arm/mach-pxa/pxa27x.h | 2 +- arch/arm/mach-pxa/pxa2xx.c | 1 - arch/arm/mach-pxa/pxa300.c | 1 + arch/arm/mach-pxa/pxa320.c | 1 + arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 3 +- arch/arm/mach-pxa/pxa3xx.h | 2 +- arch/arm/mach-pxa/pxa930.c | 1 + arch/arm/mach-pxa/regs-rtc.h | 2 +- arch/arm/mach-pxa/regs-uart.h | 2 + arch/arm/mach-pxa/sleep.S | 1 - arch/arm/mach-pxa/smemc.c | 2 +- arch/arm/mach-pxa/spitz_pm.c | 1 - arch/arm/mach-pxa/standby.S | 1 - arch/arm/mach-pxa/xcep.c | 2 +- arch/arm/mach-pxa/zylonite.c | 1 + arch/arm/mach-pxa/zylonite.h | 2 + arch/arm/mach-pxa/zylonite_pxa300.c | 1 + arch/arm/mach-pxa/zylonite_pxa320.c | 1 + drivers/clk/pxa/clk-pxa3xx.c | 1 + drivers/cpufreq/pxa2xx-cpufreq.c | 1 + drivers/cpufreq/pxa3xx-cpufreq.c | 1 + drivers/input/mouse/pxa930_trkball.c | 1 - drivers/input/touchscreen/zylonite-wm97xx.c | 2 +- drivers/leds/leds-locomo.c | 1 - drivers/mmc/host/pxamci.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 - drivers/mtd/nand/raw/cmx270_nand.c | 3 +- drivers/pcmcia/pxa2xx_base.c | 2 +- drivers/pcmcia/pxa2xx_cm_x2xx.c | 2 +- drivers/pcmcia/pxa2xx_sharpsl.c | 1 - drivers/pcmcia/sa1111_generic.c | 1 - drivers/pcmcia/sa1111_lubbock.c | 1 - drivers/pcmcia/soc_common.c | 2 - drivers/rtc/rtc-pxa.c | 2 - drivers/usb/host/ohci-pxa27x.c | 3 +- drivers/video/fbdev/pxafb.c | 2 +- drivers/watchdog/sa1100_wdt.c | 1 - .../hardware.h => include/linux/soc/pxa/cpu.h | 61 ++----------------- sound/arm/pxa2xx-ac97-lib.c | 1 + sound/soc/pxa/pxa2xx-ac97.c | 2 +- sound/soc/pxa/pxa2xx-i2s.c | 2 +- sound/soc/pxa/z2.c | 1 - 80 files changed, 121 insertions(+), 119 deletions(-) create mode 100644 arch/arm/mach-pxa/include/mach/pxa-regs.h create mode 100644 arch/arm/mach-pxa/pxa-regs.h rename arch/arm/mach-pxa/include/mach/hardware.h => include/linux/soc/pxa/cpu.h (75%) -- 2.20.0