diff mbox series

[2/2] arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports

Message ID 20191028093730.23094-3-rogerq@ti.com
State Accepted
Commit 49e19745e4b55ceb5d4d9199a5860044284f5c69
Headers show
Series arm64: dts: ti: k3-j721e: Add USB ports | expand

Commit Message

Roger Quadros Oct. 28, 2019, 9:37 a.m. UTC 
Add USB0 as otg port and USB1 as host port.

Although USB0 can be used at super-speed, limit the
speed to high-speed for now till SERDES PHY support
is added.

Signed-off-by: Roger Quadros <rogerq@ti.com>

Signed-off-by: Sekhar Nori <nsekhar@ti.com>

---
 .../dts/ti/k3-j721e-common-proc-board.dts     | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 57df79a815f0..2a3cd6174504 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -55,6 +55,18 @@ 
 			J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
 		>;
 	};
+
+	main_usbss0_pins_default: main_usbss0_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
+		>;
+	};
+
+	main_usbss1_pins_default: main_usbss1_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
+		>;
+	};
 };
 
 &wkup_pmx0 {
@@ -244,3 +256,26 @@ 
 	/* Unused */
 	status = "disabled";
 };
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,usb2-only;
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss1_pins_default>;
+	ti,usb2-only;
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+};