@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
- * Copyright 2016-2018 NXP
+ * Copyright 2016-2019 NXP
*
*/
@@ -1834,6 +1834,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
flc = &priv->flc_desc[0].flc;
+ session->ctxt_type = DPAA2_SEC_CIPHER;
session->cipher_key.data = rte_zmalloc(NULL, xform->cipher.key.length,
RTE_CACHE_LINE_SIZE);
if (session->cipher_key.data == NULL) {
@@ -1970,6 +1971,7 @@ dpaa2_sec_auth_init(struct rte_cryptodev *dev,
priv->fle_pool = dev_priv->fle_pool;
flc = &priv->flc_desc[DESC_INITFINAL].flc;
+ session->ctxt_type = DPAA2_SEC_AUTH;
session->auth_key.data = rte_zmalloc(NULL, xform->auth.key.length,
RTE_CACHE_LINE_SIZE);
if (session->auth_key.data == NULL) {
@@ -2478,27 +2480,33 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
/* Cipher Only */
if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER && xform->next == NULL) {
- session->ctxt_type = DPAA2_SEC_CIPHER;
ret = dpaa2_sec_cipher_init(dev, xform, session);
/* Authentication Only */
} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
xform->next == NULL) {
- session->ctxt_type = DPAA2_SEC_AUTH;
ret = dpaa2_sec_auth_init(dev, xform, session);
/* Cipher then Authenticate */
} else if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
session->ext_params.aead_ctxt.auth_cipher_text = true;
- ret = dpaa2_sec_aead_chain_init(dev, xform, session);
-
+ if (xform->cipher.algo == RTE_CRYPTO_CIPHER_NULL)
+ ret = dpaa2_sec_auth_init(dev, xform, session);
+ else if (xform->next->auth.algo == RTE_CRYPTO_AUTH_NULL)
+ ret = dpaa2_sec_cipher_init(dev, xform, session);
+ else
+ ret = dpaa2_sec_aead_chain_init(dev, xform, session);
/* Authenticate then Cipher */
} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
session->ext_params.aead_ctxt.auth_cipher_text = false;
- ret = dpaa2_sec_aead_chain_init(dev, xform, session);
-
+ if (xform->auth.algo == RTE_CRYPTO_AUTH_NULL)
+ ret = dpaa2_sec_cipher_init(dev, xform, session);
+ else if (xform->next->cipher.algo == RTE_CRYPTO_CIPHER_NULL)
+ ret = dpaa2_sec_auth_init(dev, xform, session);
+ else
+ ret = dpaa2_sec_aead_chain_init(dev, xform, session);
/* AEAD operation for AES-GCM kind of Algorithms */
} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AEAD &&
xform->next == NULL) {
@@ -200,6 +200,27 @@ typedef struct dpaa2_sec_session_entry {
} dpaa2_sec_session;
static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = {
+ { /* NULL (AUTH) */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_NULL,
+ .block_size = 1,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, },
+ }, },
+ },
{ /* MD5 HMAC */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
@@ -356,6 +377,26 @@ static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = {
}, }
}, }
},
+ { /* NULL (CIPHER) */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_NULL,
+ .block_size = 1,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ }
+ }, },
+ }, }
+ },
{ /* AES CBC */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
These are supported when using protocol offload mode or in chain mode. Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> --- drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +++++++---- drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 41 +++++++++++++++++++++ 2 files changed, 56 insertions(+), 7 deletions(-) -- 2.17.1