@@ -67,6 +67,9 @@ \subsection{Feature bits}\label{sec:Device Types / IOMMU Device / Feature bits}
\item[VIRTIO_IOMMU_F_MMIO (5)]
The VIRTIO_IOMMU_MAP_F_MMIO flag is available.
+
+\item[VIRTIO_IOMMU_F_TOPOLOGY (6)]
+ Topology description is available at \field{topo_offset}.
\end{description}
\drivernormative{\subsubsection}{Feature bits}{Device Types / IOMMU Device / Feature bits}
@@ -97,6 +100,7 @@ \subsection{Device configuration layout}\label{sec:Device Types / IOMMU Device /
le32 end;
} domain_range;
le32 probe_size;
+ le16 topo_offset;
};
\end{lstlisting}
@@ -141,6 +145,90 @@ \subsection{Device initialization}\label{sec:Device Types / IOMMU Device / Devic
If the driver does not accept the VIRTIO_IOMMU_F_BYPASS feature, the
device SHOULD NOT let endpoints access the guest-physical address space.
+\subsubsection{Built-in topology description}\label{sec:Device Types / IOMMU Device / Device initialization / topology}
+
+The device manages memory accesses from endpoints, identified by endpoint
+IDs. The driver can discover which endpoint ID corresponds to an endpoint
+using several methods, depending on the platform. Platforms described
+with device tree use the \texttt{iommus} and \texttt{iommu-map} properties
+embedded into device nodes for this purpose. Platforms described with
+ACPI use a table such as the Virtual I/O Table. Platforms that do not
+support either device tree or ACPI may embed a minimalistic description
+in the device configuration space.
+
+An important disadvantage of describing the topology from within the
+device is the lack of initialization ordering information. Out-of-band
+descriptions such as device tree and ACPI let the operating system know
+about device dependencies so that it can initialize supplier devices
+(IOMMUs) before their consumers (endpoints). Platforms using the
+VIRTIO_IOMMU_F_TOPOLOGY feature have to communicate the device dependency
+in another way.
+
+If the VIRTIO_IOMMU_F_TOPOLOGY feature is negotiated, \field{topo_offset}
+is the offset between the beginning of the device-specific configuration
+space (virtio_iommu_config) and the first topology structure header. A
+topology structures defines the endpoint ID of one or more endpoints
+managed by the virtio-iommu device.
+
+\begin{lstlisting}
+struct virtio_iommu_topo_head {
+ le16 type;
+ le16 next;
+};
+\end{lstlisting}
+
+\field{next} is the offset between the beginning of the device-specific
+configuration space and the next topology structure header. When
+\field{next} is zero, this is the last structure.
+
+\field{type} describes the type of structure:
+\begin{description}
+ \item[VIRTIO_IOMMU_TOPO_PCI_RANGE (0)] struct virtio_iommu_topo_pci_range
+ \item[VIRTIO_IOMMU_TOPO_ENDPOINT (1)] struct virtio_iommu_topo_endpoint
+\end{description}
+
+\paragraph{PCI range}\label{sec:Device Types / IOMMU Device / Device initialization / topology / PCI range}
+
+\begin{lstlisting}
+struct virtio_iommu_topo_pci_range {
+ struct virtio_iommu_topo_head head;
+ le32 endpoint_start;
+ le16 hierarchy;
+ le16 requester_start;
+ le16 requester_end;
+ le16 reserved;
+};
+\end{lstlisting}
+
+The PCI range structure describes the endpoint IDs of a series of PCI
+devices.
+
+\begin{description}
+ \item[\field{hierarchy}] Identifier of the PCI hierarchy. Sometimes
+ called PCI segment or domain number.
+ \item[\field{requester_start}] First requester ID in the range.
+ \item[\field{requester_end}] Last requester ID in the range.
+ \item[\field{endpoint_start}] First endpoint ID.
+\end{description}
+
+The correspondence between a PCI requester ID in the range
+[ requester_start; requester_end ] and its endpoint IDs is a linear
+transformation: endpoint_id = requester_id - requester_start +
+endpoint_start.
+
+\paragraph{Single endpoint}\label{sec:Device Types / IOMMU Device / Device initialization / topology / Single endpoint}
+
+\begin{lstlisting}
+struct virtio_iommu_topo_endpoint {
+ struct virtio_iommu_topo_head head;
+ le32 endpoint;
+ le64 address;
+};
+\end{lstlisting}
+
+\field{endpoint} is the ID of a single endpoint, identified by its first
+MMIO address in the physical address space.
+
\subsection{Device operations}\label{sec:Device Types / IOMMU Device / Device operations}
Driver send requests on the request virtqueue, notifies the device and
Add a lightweight method to describe the IOMMU topology in the config space, guarded by a new feature bit. A list of capabilities in the config space describes the devices managed by the IOMMU and their endpoint IDs. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> --- virtio-iommu.tex | 88 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) -- 2.24.0