diff mbox series

[v6,8/8] misc: hisi_hikey_usb: Driver to support usb functionality of Hikey960

Message ID 20191128051001.18995-9-john.stultz@linaro.org
State Superseded
Headers show
Series HiKey960 USB support | expand

Commit Message

John Stultz Nov. 28, 2019, 5:10 a.m. UTC 
From: Yu Chen <chenyu56@huawei.com>


The HiKey960 has a fairly complex USB configuration due to it
needing to support a USB-C port for host/device mode and multiple
USB-A ports in host mode using a single USB controller.

See schematics here:
  https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf

This driver acts as a usb-role-switch intermediary, intercepting
the role switch notifications from the tcpm code, and passing
them on to the dwc3 core.

In doing so, it also controls the onboard hub and power gpios in
order to properly route the data lines between the USB-C port
and the onboard hub to the USB-A ports.

NOTE: It was noted that controlling the TYPEC_VBUS_POWER_OFF and
TYPEC_VBUS_POWER_ON values here is not reccomended. I'm looking
for a way to remove that bit from the logic here, but wanted to
still get feedback on this approach.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Yu Chen <chenyu56@huawei.com>

[jstultz: Major rework to make the driver a usb-role-switch
          intermediary]
Signed-off-by: John Stultz <john.stultz@linaro.org>

Change-Id: Icf381520abd46d083750d01f91e478321560fbf9
---
v3:
* Major rework to make the driver a usb-role-switch intermediary
  rather then trying to do notifier callbacks from the role switch
  logic
---
 drivers/misc/Kconfig          |   6 ++
 drivers/misc/Makefile         |   1 +
 drivers/misc/hisi_hikey_usb.c | 178 ++++++++++++++++++++++++++++++++++
 3 files changed, 185 insertions(+)
 create mode 100644 drivers/misc/hisi_hikey_usb.c

-- 
2.17.1

Comments

Greg KH Dec. 10, 2019, 10:26 a.m. UTC | #1 
On Thu, Nov 28, 2019 at 05:10:01AM +0000, John Stultz wrote:
> From: Yu Chen <chenyu56@huawei.com>

> 

> The HiKey960 has a fairly complex USB configuration due to it

> needing to support a USB-C port for host/device mode and multiple

> USB-A ports in host mode using a single USB controller.

> 

> See schematics here:

>   https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf

> 

> This driver acts as a usb-role-switch intermediary, intercepting

> the role switch notifications from the tcpm code, and passing

> them on to the dwc3 core.

> 

> In doing so, it also controls the onboard hub and power gpios in

> order to properly route the data lines between the USB-C port

> and the onboard hub to the USB-A ports.

> 

> NOTE: It was noted that controlling the TYPEC_VBUS_POWER_OFF and

> TYPEC_VBUS_POWER_ON values here is not reccomended. I'm looking

> for a way to remove that bit from the logic here, but wanted to

> still get feedback on this approach.

> 

> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

> Cc: Rob Herring <robh+dt@kernel.org>

> Cc: Mark Rutland <mark.rutland@arm.com>

> CC: ShuFan Lee <shufan_lee@richtek.com>

> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>

> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>

> Cc: Yu Chen <chenyu56@huawei.com>

> Cc: Felipe Balbi <balbi@kernel.org>

> Cc: Hans de Goede <hdegoede@redhat.com>

> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>

> Cc: Jun Li <lijun.kernel@gmail.com>

> Cc: Valentin Schneider <valentin.schneider@arm.com>

> Cc: Jack Pham <jackp@codeaurora.org>

> Cc: linux-usb@vger.kernel.org

> Cc: devicetree@vger.kernel.org

> Signed-off-by: Yu Chen <chenyu56@huawei.com>

> [jstultz: Major rework to make the driver a usb-role-switch

>           intermediary]

> Signed-off-by: John Stultz <john.stultz@linaro.org>

> Change-Id: Icf381520abd46d083750d01f91e478321560fbf9


Checkpatch is your friend :)
diff mbox series

Patch

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 7f0d48f406e3..1d0279b77a12 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -465,6 +465,12 @@  config PVPANIC
 	  a paravirtualized device provided by QEMU; it lets a virtual machine
 	  (guest) communicate panic events to the host.
 
+config HISI_HIKEY_USB
+	tristate "USB functionality of HiSilicon Hikey Platform"
+	depends on OF && GPIOLIB
+	help
+	  If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index c1860d35dc7e..e5e85ad0dd57 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -57,3 +57,4 @@  obj-y				+= cardreader/
 obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
 obj-$(CONFIG_HABANA_AI)		+= habanalabs/
 obj-$(CONFIG_XILINX_SDFEC)	+= xilinx_sdfec.o
+obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c
new file mode 100644
index 000000000000..32015bc9ccf6
--- /dev/null
+++ b/drivers/misc/hisi_hikey_usb.c
@@ -0,0 +1,178 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for usb functionality of Hikey series boards
+ * based on Hisilicon Kirin Soc.
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ *		http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/usb/role.h>
+
+#define DEVICE_DRIVER_NAME "hisi_hikey_usb"
+
+#define HUB_VBUS_POWER_ON 1
+#define HUB_VBUS_POWER_OFF 0
+#define USB_SWITCH_TO_HUB 1
+#define USB_SWITCH_TO_TYPEC 0
+#define TYPEC_VBUS_POWER_ON 1
+#define TYPEC_VBUS_POWER_OFF 0
+
+struct hisi_hikey_usb {
+	struct gpio_desc *otg_switch;
+	struct gpio_desc *typec_vbus;
+	struct gpio_desc *hub_vbus;
+
+	struct usb_role_switch *hub_role_sw;
+	struct usb_role_switch *dev_role_sw;
+	struct notifier_block nb;
+};
+
+static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->hub_vbus, value);
+}
+
+static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+			    int switch_to)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to);
+}
+
+static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+				 int value)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value);
+}
+
+static int hub_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb = dev_get_drvdata(dev);
+
+	if (!hisi_hikey_usb || !hisi_hikey_usb->dev_role_sw)
+		return -EINVAL;
+
+	switch (role) {
+	case USB_ROLE_NONE:
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB);
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON);
+		break;
+	case USB_ROLE_HOST:
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_ON);
+		break;
+	case USB_ROLE_DEVICE:
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
+		usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+		break;
+	default:
+		break;
+	}
+
+	return usb_role_switch_set_role(hisi_hikey_usb->dev_role_sw, role);
+}
+
+static enum usb_role hub_usb_role_switch_get(struct device *dev)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb = dev_get_drvdata(dev);
+
+	if (!hisi_hikey_usb || !hisi_hikey_usb->dev_role_sw)
+		return -EINVAL;
+
+	return usb_role_switch_get_role(hisi_hikey_usb->dev_role_sw);
+}
+
+static int hisi_hikey_usb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct hisi_hikey_usb *hisi_hikey_usb;
+	struct usb_role_switch_desc hub_role_switch = {NULL};
+
+	hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL);
+	if (!hisi_hikey_usb)
+		return -ENOMEM;
+
+	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
+						    GPIOD_OUT_LOW);
+	if (IS_ERR(hisi_hikey_usb->typec_vbus))
+		return PTR_ERR(hisi_hikey_usb->typec_vbus);
+
+	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(hisi_hikey_usb->otg_switch))
+		return PTR_ERR(hisi_hikey_usb->otg_switch);
+
+	/* hub-vdd33-en is optional */
+	hisi_hikey_usb->hub_vbus = devm_gpiod_get_optional(dev, "hub-vdd33-en",
+							   GPIOD_OUT_HIGH);
+	if (IS_ERR(hisi_hikey_usb->hub_vbus))
+		return PTR_ERR(hisi_hikey_usb->hub_vbus);
+
+	hisi_hikey_usb->dev_role_sw = usb_role_switch_get(dev);
+	if (!hisi_hikey_usb->dev_role_sw)
+		return -EPROBE_DEFER;
+	if (IS_ERR(hisi_hikey_usb->dev_role_sw))
+		return PTR_ERR(hisi_hikey_usb->dev_role_sw);
+
+	hub_role_switch.fwnode = dev_fwnode(dev);
+	hub_role_switch.set = hub_usb_role_switch_set;
+	hub_role_switch.get = hub_usb_role_switch_get;
+	hisi_hikey_usb->hub_role_sw = usb_role_switch_register(dev,
+							&hub_role_switch);
+
+	if (IS_ERR(hisi_hikey_usb->hub_role_sw)) {
+		usb_role_switch_put(hisi_hikey_usb->dev_role_sw);
+		return PTR_ERR(hisi_hikey_usb->hub_role_sw);
+	}
+
+	platform_set_drvdata(pdev, hisi_hikey_usb);
+
+	return 0;
+}
+
+static int  hisi_hikey_usb_remove(struct platform_device *pdev)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev);
+
+	if (hisi_hikey_usb->hub_role_sw)
+		usb_role_switch_unregister(hisi_hikey_usb->hub_role_sw);
+
+	if (hisi_hikey_usb->dev_role_sw)
+		usb_role_switch_put(hisi_hikey_usb->dev_role_sw);
+
+	return 0;
+}
+
+static const struct of_device_id id_table_hisi_hikey_usb[] = {
+	{.compatible = "hisilicon,gpio_hubv1"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, id_table_hisi_hikey_usb);
+
+static struct platform_driver hisi_hikey_usb_driver = {
+	.probe = hisi_hikey_usb_probe,
+	.remove = hisi_hikey_usb_remove,
+	.driver = {
+		.name = DEVICE_DRIVER_NAME,
+		.of_match_table = id_table_hisi_hikey_usb,
+	},
+};
+
+module_platform_driver(hisi_hikey_usb_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey");
+MODULE_LICENSE("GPL v2");