@@ -414,6 +414,14 @@ config USB_OHCI_HCD_DA8XX
Enables support for the on-chip OHCI controller on
DA8xx/OMAP-L1x chips.
+config USB_OHCI_HCD_EP93XX
+ tristate "Support for EP93XX on-chip OHCI USB controller"
+ depends on USB_OHCI_HCD && ARCH_EP93XX
+ default y
+ ---help---
+ Enables support for the on-chip OHCI controller on
+ EP93XX chips.
+
config USB_OHCI_HCD_AT91
tristate "Support for Atmel on-chip OHCI USB controller"
depends on USB_OHCI_HCD && ARCH_AT91
@@ -54,6 +54,7 @@ obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o
obj-$(CONFIG_USB_OHCI_HCD_S3CXXXX) += ohci-s3c2410.o
obj-$(CONFIG_USB_OHCI_HCD_LPC32XX) += ohci-nxp.o
obj-$(CONFIG_USB_OHCI_HCD_DA8XX) += ohci-da8xx.o
+obj-$(CONFIG_USB_OHCI_HCD_EP93XX) += ohci-ep93xx.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
@@ -25,8 +25,21 @@
#include <linux/clk.h>
#include <linux/device.h>
-#include <linux/signal.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/signal.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
+#define DRIVER_DESC "OHCI EP93xx driver"
+
+static const char hcd_name[] = "ohci-ep93xx";
+
+static struct hc_driver __read_mostly ohci_ep93xx_hc_driver;
static struct clk *usb_host_clock;
@@ -45,6 +58,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
{
int retval;
struct usb_hcd *hcd;
+ struct ohci_hcd *ohci;
if (pdev->resource[1].flags != IORESOURCE_IRQ) {
dev_dbg(&pdev->dev, "resource[1] is not IORESOURCE_IRQ\n");
@@ -79,8 +93,6 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
ep93xx_start_hc(&pdev->dev);
- ohci_hcd_init(hcd_to_ohci(hcd));
-
retval = usb_add_hcd(hcd, pdev->resource[1].start, 0);
if (retval == 0)
return retval;
@@ -107,48 +119,6 @@ static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd,
usb_put_hcd(hcd);
}
-static int ohci_ep93xx_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int ret;
-
- if ((ret = ohci_init(ohci)) < 0)
- return ret;
-
- if ((ret = ohci_run(ohci)) < 0) {
- dev_err(hcd->self.controller, "can't start %s\n",
- hcd->self.bus_name);
- ohci_stop(hcd);
- return ret;
- }
-
- return 0;
-}
-
-static struct hc_driver ohci_ep93xx_hc_driver = {
- .description = hcd_name,
- .product_desc = "EP93xx OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
- .start = ohci_ep93xx_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
- .get_frame_number = ohci_get_frame,
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-extern int usb_disabled(void);
-
static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev)
{
int ret;
@@ -206,7 +176,6 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
}
#endif
-
static struct platform_driver ohci_hcd_ep93xx_driver = {
.probe = ohci_hcd_ep93xx_drv_probe,
.remove = ohci_hcd_ep93xx_drv_remove,
@@ -221,4 +190,24 @@ static struct platform_driver ohci_hcd_ep93xx_driver = {
},
};
+static int __init ohci_ep93xx_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ohci_init_driver(&ohci_ep93xx_hc_driver, NULL);
+ return platform_driver_register(&ohci_hcd_ep93xx_driver);
+}
+module_init(ohci_ep93xx_init);
+
+static void __exit ohci_ep93xx_cleanup(void)
+{
+ platform_driver_unregister(&ohci_hcd_ep93xx_driver);
+}
+module_exit(ohci_ep93xx_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ep93xx-ohci");
@@ -1189,11 +1189,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_hcd_pxa27x_driver
#endif
-#ifdef CONFIG_ARCH_EP93XX
-#include "ohci-ep93xx.c"
-#define EP93XX_PLATFORM_DRIVER ohci_hcd_ep93xx_driver
-#endif
-
#ifdef CONFIG_USB_OHCI_HCD_PPC_OF
#include "ohci-ppc-of.c"
#define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver
@@ -1284,20 +1279,9 @@ static int __init ohci_hcd_mod_init(void)
if (retval < 0)
goto error_tmio;
#endif
-
-#ifdef EP93XX_PLATFORM_DRIVER
- retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER);
- if (retval < 0)
- goto error_ep93xx;
-#endif
-
return retval;
/* Error path */
-#ifdef EP93XX_PLATFORM_DRIVER
- platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
- error_ep93xx:
-#endif
#ifdef TMIO_OHCI_DRIVER
platform_driver_unregister(&TMIO_OHCI_DRIVER);
error_tmio:
@@ -1335,9 +1319,6 @@ module_init(ohci_hcd_mod_init);
static void __exit ohci_hcd_mod_exit(void)
{
-#ifdef EP93XX_PLATFORM_DRIVER
- platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
-#endif
#ifdef TMIO_OHCI_DRIVER
platform_driver_unregister(&TMIO_OHCI_DRIVER);
#endif
Separate the OHCI EP93XX host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Cc: linux-usb@vger.kernel.org V2: -ohci_hcd_init() statements are removed, because by default it is called in ohci_setup(). --- drivers/usb/host/Kconfig | 8 ++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ohci-ep93xx.c | 81 +++++++++++++++++----------------------- drivers/usb/host/ohci-hcd.c | 19 ---------- 4 files changed, 44 insertions(+), 65 deletions(-)