@@ -59,7 +59,7 @@ static unsigned int switchlocked;
#define STATUS_BUSY 0x40000000
/* timeouts */
-#define CMD_TIMEOUT 100000
+#define SDRICOH_CMD_TIMEOUT_US 1000000
#define SDRICOH_DATA_TIMEOUT_US 1000000
/* list of supported pcmcia devices */
@@ -158,8 +158,7 @@ static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted)
static int sdricoh_mmc_cmd(struct sdricoh_host *host, struct mmc_command *cmd)
{
unsigned int status;
- int result = 0;
- unsigned int loop = 0;
+ int ret;
unsigned char opcode = cmd->opcode;
/* reset status reg? */
@@ -175,24 +174,24 @@ static int sdricoh_mmc_cmd(struct sdricoh_host *host, struct mmc_command *cmd)
/* fill parameters */
sdricoh_writel(host, R204_CMD_ARG, cmd->arg);
sdricoh_writel(host, R200_CMD, (0x10000 << 8) | opcode);
+
/* wait for command completion */
- if (opcode) {
- for (loop = 0; loop < CMD_TIMEOUT; loop++) {
- status = sdricoh_readl(host, R21C_STATUS);
- sdricoh_writel(host, R2E4_STATUS_RESP, status);
- if (status & STATUS_CMD_FINISHED)
- break;
- }
- /* don't check for timeout in the loop it is not always
- reset correctly
- */
- if (loop == CMD_TIMEOUT || status & STATUS_CMD_TIMEOUT)
- result = -ETIMEDOUT;
+ if (!opcode)
+ return 0;
- }
+ ret = read_poll_timeout(sdricoh_readl, status,
+ sdricoh_status_ok(host, status, STATUS_CMD_FINISHED),
+ 32, SDRICOH_CMD_TIMEOUT_US, false,
+ host, R21C_STATUS);
- return result;
+ /*
+ * Don't check for timeout status in the loop, as it's not always reset
+ * correctly.
+ */
+ if (ret || status & STATUS_CMD_TIMEOUT)
+ return -ETIMEDOUT;
+ return 0;
}
static int sdricoh_reset(struct sdricoh_host *host)
Rather than to poll in a busy-loop, let's convert into using read_poll_timeout() and insert a small delay between each polling attempts. In particular, this avoids hogging the CPU. Additionally, to convert to read_poll_timeout() we also need to switch from using a specific number of polling attempts, into a specific timeout in us instead. The previous 100000 attempts, is translated into a total timeout of total 1s, as that seemed like reasonable value to pick. Cc: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- Changes in v2: - Use read_poll_timeout() instead of readl_poll_timeout(), as to preserve the debug print in sdricoh_readl(). --- drivers/mmc/host/sdricoh_cs.c | 33 ++++++++++++++++----------------- 1 file changed, 16 insertions(+), 17 deletions(-) -- 2.20.1