diff mbox series

drm: pl111: add CONFIG_VEXPRESS_CONFIG dependency

Message ID 20200527133158.462057-1-arnd@arndb.de
State New
Headers show
Series drm: pl111: add CONFIG_VEXPRESS_CONFIG dependency | expand

Commit Message

Arnd Bergmann May 27, 2020, 1:31 p.m. UTC 
The vexpress_config code fails to link in some configurations:

drivers/gpu/drm/pl111/pl111_versatile.o: in function `pl111_versatile_init':
(.text+0x1f0): undefined reference to `devm_regmap_init_vexpress_config'

Add a dependency that links to this only if the dependency is there,
and prevent the configuration where the drm driver is built-in but
the config is a loadable module.

Fixes: 826fc86b5903 ("drm: pl111: Move VExpress setup into versatile init")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
 drivers/gpu/drm/pl111/Kconfig           | 1 +
 drivers/gpu/drm/pl111/pl111_versatile.c | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Comments

Linus Walleij May 27, 2020, 1:42 p.m. UTC | #1 
On Wed, May 27, 2020 at 3:32 PM Arnd Bergmann <arnd@arndb.de> wrote:
> The vexpress_config code fails to link in some configurations:

>

> drivers/gpu/drm/pl111/pl111_versatile.o: in function `pl111_versatile_init':

> (.text+0x1f0): undefined reference to `devm_regmap_init_vexpress_config'

>

> Add a dependency that links to this only if the dependency is there,

> and prevent the configuration where the drm driver is built-in but

> the config is a loadable module.

>

> Fixes: 826fc86b5903 ("drm: pl111: Move VExpress setup into versatile init")

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>


Reviewed-by: Linus Walleij <linus.walleij@linaro.org>


Rob will you apply this directly to the drm tree?

Yours,
Linus Walleij
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Sam Ravnborg May 27, 2020, 2:52 p.m. UTC | #2 
Hi Arnd.

On Wed, May 27, 2020 at 03:31:42PM +0200, Arnd Bergmann wrote:
> The vexpress_config code fails to link in some configurations:

> 

> drivers/gpu/drm/pl111/pl111_versatile.o: in function `pl111_versatile_init':

> (.text+0x1f0): undefined reference to `devm_regmap_init_vexpress_config'

> 

> Add a dependency that links to this only if the dependency is there,

> and prevent the configuration where the drm driver is built-in but

> the config is a loadable module.

> 

> Fixes: 826fc86b5903 ("drm: pl111: Move VExpress setup into versatile init")

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>


Could this be another way to fix it:

diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c
index 64f01a4e6767..1c38d3bd2e84 100644
--- a/drivers/gpu/drm/pl111/pl111_versatile.c
+++ b/drivers/gpu/drm/pl111/pl111_versatile.c
@@ -379,7 +379,7 @@ static int pl111_vexpress_clcd_init(struct device *dev, struct device_node *np,
        u32 val;
        int ret;

-       if (!IS_ENABLED(CONFIG_VEXPRESS_CONFIG))
+       if (!IS_REACHABLE(CONFIG_VEXPRESS_CONFIG))
                return -ENODEV;

        /*


Then we no longer have the whole driver depending on
the value of VEXPRESS_CONFIG.
Not that I like IS_REACHABLE() but we already had
IS_ENABLED() to cover up here, and that was not enough.

With your patch would we then need the IS_ENABLED()
check?

	Sam

> ---

>  drivers/gpu/drm/pl111/Kconfig           | 1 +

>  drivers/gpu/drm/pl111/pl111_versatile.c | 3 ++-

>  2 files changed, 3 insertions(+), 1 deletion(-)

> 

> diff --git a/drivers/gpu/drm/pl111/Kconfig b/drivers/gpu/drm/pl111/Kconfig

> index 80f6748055e3..33a005816fdd 100644

> --- a/drivers/gpu/drm/pl111/Kconfig

> +++ b/drivers/gpu/drm/pl111/Kconfig

> @@ -3,6 +3,7 @@ config DRM_PL111

>  	tristate "DRM Support for PL111 CLCD Controller"

>  	depends on DRM

>  	depends on ARM || ARM64 || COMPILE_TEST

> +	depends on VEXPRESS_CONFIG || !VEXPRESS_CONFIG

>  	depends on COMMON_CLK

>  	select DRM_KMS_HELPER

>  	select DRM_KMS_CMA_HELPER

> diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c

> index 64f01a4e6767..451d74205108 100644

> --- a/drivers/gpu/drm/pl111/pl111_versatile.c

> +++ b/drivers/gpu/drm/pl111/pl111_versatile.c

> @@ -476,7 +476,8 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)

>  	versatile_clcd_type = (enum versatile_clcd)clcd_id->data;

>  

>  	/* Versatile Express special handling */

> -	if (versatile_clcd_type == VEXPRESS_CLCD_V2M) {

> +	if (IS_ENABLED(CONFIG_VEXPRESS_CONFIG) &&

> +	    versatile_clcd_type == VEXPRESS_CLCD_V2M) {

>  		int ret = pl111_vexpress_clcd_init(dev, np, priv);

>  		of_node_put(np);

>  		if (ret)

> -- 

> 2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Arnd Bergmann May 27, 2020, 3:47 p.m. UTC | #3 
On Wed, May 27, 2020 at 4:52 PM Sam Ravnborg <sam@ravnborg.org> wrote:
>

> Hi Arnd.

>

> On Wed, May 27, 2020 at 03:31:42PM +0200, Arnd Bergmann wrote:

> > The vexpress_config code fails to link in some configurations:

> >

> > drivers/gpu/drm/pl111/pl111_versatile.o: in function `pl111_versatile_init':

> > (.text+0x1f0): undefined reference to `devm_regmap_init_vexpress_config'

> >

> > Add a dependency that links to this only if the dependency is there,

> > and prevent the configuration where the drm driver is built-in but

> > the config is a loadable module.

> >

> > Fixes: 826fc86b5903 ("drm: pl111: Move VExpress setup into versatile init")

> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>

>

> Could this be another way to fix it:

>

> diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c

> index 64f01a4e6767..1c38d3bd2e84 100644

> --- a/drivers/gpu/drm/pl111/pl111_versatile.c

> +++ b/drivers/gpu/drm/pl111/pl111_versatile.c

> @@ -379,7 +379,7 @@ static int pl111_vexpress_clcd_init(struct device *dev, struct device_node *np,

>         u32 val;

>         int ret;

>

> -       if (!IS_ENABLED(CONFIG_VEXPRESS_CONFIG))

> +       if (!IS_REACHABLE(CONFIG_VEXPRESS_CONFIG))

>                 return -ENODEV;

>

>         /*

>

>

> Then we no longer have the whole driver depending on

> the value of VEXPRESS_CONFIG.

> Not that I like IS_REACHABLE() but we already had

> IS_ENABLED() to cover up here, and that was not enough.

>

> With your patch would we then need the IS_ENABLED()

> check?


The IS_ENABLED() check is what I'm adding, not removing. I'd still
the Kconfig dependency combined with that check over
IS_REACHABLE(), which is more likely to silently not work.

       Arnd
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Sam Ravnborg May 27, 2020, 5:50 p.m. UTC | #4 
Hi Arnd.

On Wed, May 27, 2020 at 05:47:21PM +0200, Arnd Bergmann wrote:
> On Wed, May 27, 2020 at 4:52 PM Sam Ravnborg <sam@ravnborg.org> wrote:

> >

> > Hi Arnd.

> >

> > On Wed, May 27, 2020 at 03:31:42PM +0200, Arnd Bergmann wrote:

> > > The vexpress_config code fails to link in some configurations:

> > >

> > > drivers/gpu/drm/pl111/pl111_versatile.o: in function `pl111_versatile_init':

> > > (.text+0x1f0): undefined reference to `devm_regmap_init_vexpress_config'

> > >

> > > Add a dependency that links to this only if the dependency is there,

> > > and prevent the configuration where the drm driver is built-in but

> > > the config is a loadable module.

> > >

> > > Fixes: 826fc86b5903 ("drm: pl111: Move VExpress setup into versatile init")

> > > Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> >

> > Could this be another way to fix it:

> >

> > diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c

> > index 64f01a4e6767..1c38d3bd2e84 100644

> > --- a/drivers/gpu/drm/pl111/pl111_versatile.c

> > +++ b/drivers/gpu/drm/pl111/pl111_versatile.c

> > @@ -379,7 +379,7 @@ static int pl111_vexpress_clcd_init(struct device *dev, struct device_node *np,

> >         u32 val;

> >         int ret;

> >

> > -       if (!IS_ENABLED(CONFIG_VEXPRESS_CONFIG))

> > +       if (!IS_REACHABLE(CONFIG_VEXPRESS_CONFIG))

> >                 return -ENODEV;

> >

> >         /*

> >

> >

> > Then we no longer have the whole driver depending on

> > the value of VEXPRESS_CONFIG.

> > Not that I like IS_REACHABLE() but we already had

> > IS_ENABLED() to cover up here, and that was not enough.

> >

> > With your patch would we then need the IS_ENABLED()

> > check?

> 

> The IS_ENABLED() check is what I'm adding, not removing. I'd still

> the Kconfig dependency combined with that check over

> IS_REACHABLE(), which is more likely to silently not work.


Then the now redundant IS_ENABLED() check should go.
With you patch it looks like this:

	...
	if (IS_ENABLED(CONFIG_VEXPRESS_CONFIG) && ...)
		pl111_vexpress_clcd_init()


And in pl111_vexpress_clcd_init() we have:

{
	if (!IS_ENABLED(CONFIG_VEXPRESS_CONFIG))
		return -ENODEV;

The IS_ENABLED() in pl111_vexpress_clcd_init() is redundant
and the patch should drop it.

	Sam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Arnd Bergmann May 27, 2020, 7:03 p.m. UTC | #5 
On Wed, May 27, 2020 at 7:50 PM Sam Ravnborg <sam@ravnborg.org> wrote:
> On Wed, May 27, 2020 at 05:47:21PM +0200, Arnd Bergmann wrote:

> > On Wed, May 27, 2020 at 4:52 PM Sam Ravnborg <sam@ravnborg.org> wrote:

> > >

> > > Hi Arnd.

> > >

> > > On Wed, May 27, 2020 at 03:31:42PM +0200, Arnd Bergmann wrote:

> > > > The vexpress_config code fails to link in some configurations:

> > > >

> > > > drivers/gpu/drm/pl111/pl111_versatile.o: in function `pl111_versatile_init':

> > > > (.text+0x1f0): undefined reference to `devm_regmap_init_vexpress_config'

> > > >

> > > > Add a dependency that links to this only if the dependency is there,

> > > > and prevent the configuration where the drm driver is built-in but

> > > > the config is a loadable module.

> > > >

> > > > Fixes: 826fc86b5903 ("drm: pl111: Move VExpress setup into versatile init")

> > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> > >

> > > Could this be another way to fix it:

> > >

> > > diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c

> > > index 64f01a4e6767..1c38d3bd2e84 100644

> > > --- a/drivers/gpu/drm/pl111/pl111_versatile.c

> > > +++ b/drivers/gpu/drm/pl111/pl111_versatile.c

> > > @@ -379,7 +379,7 @@ static int pl111_vexpress_clcd_init(struct device *dev, struct device_node *np,

> > >         u32 val;

> > >         int ret;

> > >

> > > -       if (!IS_ENABLED(CONFIG_VEXPRESS_CONFIG))

> > > +       if (!IS_REACHABLE(CONFIG_VEXPRESS_CONFIG))

> > >                 return -ENODEV;

> > >

> > >         /*

> > >

> > >

> > > Then we no longer have the whole driver depending on

> > > the value of VEXPRESS_CONFIG.

> > > Not that I like IS_REACHABLE() but we already had

> > > IS_ENABLED() to cover up here, and that was not enough.

> > >

> > > With your patch would we then need the IS_ENABLED()

> > > check?

> >

> > The IS_ENABLED() check is what I'm adding, not removing. I'd still

> > the Kconfig dependency combined with that check over

> > IS_REACHABLE(), which is more likely to silently not work.

>

> Then the now redundant IS_ENABLED() check should go.

> With you patch it looks like this:

>

>         ...

>         if (IS_ENABLED(CONFIG_VEXPRESS_CONFIG) && ...)

>                 pl111_vexpress_clcd_init()

>

>

> And in pl111_vexpress_clcd_init() we have:

>

> {

>         if (!IS_ENABLED(CONFIG_VEXPRESS_CONFIG))

>                 return -ENODEV;

>

> The IS_ENABLED() in pl111_vexpress_clcd_init() is redundant

> and the patch should drop it.


Ah I see your point now, sorry I missed the double IS_ENABLED()
check at first. I'll remove the second one from my patch and
resubmit after some more build testing then.

        Arnd
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Rob Herring May 28, 2020, 9:36 p.m. UTC | #6 
On Wed, May 27, 2020 at 7:32 AM Arnd Bergmann <arnd@arndb.de> wrote:
>

> The vexpress_config code fails to link in some configurations:

>

> drivers/gpu/drm/pl111/pl111_versatile.o: in function `pl111_versatile_init':

> (.text+0x1f0): undefined reference to `devm_regmap_init_vexpress_config'

>

> Add a dependency that links to this only if the dependency is there,

> and prevent the configuration where the drm driver is built-in but

> the config is a loadable module.

>

> Fixes: 826fc86b5903 ("drm: pl111: Move VExpress setup into versatile init")

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> ---

>  drivers/gpu/drm/pl111/Kconfig           | 1 +

>  drivers/gpu/drm/pl111/pl111_versatile.c | 3 ++-

>  2 files changed, 3 insertions(+), 1 deletion(-)

>

> diff --git a/drivers/gpu/drm/pl111/Kconfig b/drivers/gpu/drm/pl111/Kconfig

> index 80f6748055e3..33a005816fdd 100644

> --- a/drivers/gpu/drm/pl111/Kconfig

> +++ b/drivers/gpu/drm/pl111/Kconfig

> @@ -3,6 +3,7 @@ config DRM_PL111

>         tristate "DRM Support for PL111 CLCD Controller"

>         depends on DRM

>         depends on ARM || ARM64 || COMPILE_TEST

> +       depends on VEXPRESS_CONFIG || !VEXPRESS_CONFIG


That's really non-obvious. Sometimes I hate kconfig. Thanks for fixing my mess.

Rob
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff mbox series

Patch

diff --git a/drivers/gpu/drm/pl111/Kconfig b/drivers/gpu/drm/pl111/Kconfig
index 80f6748055e3..33a005816fdd 100644
--- a/drivers/gpu/drm/pl111/Kconfig
+++ b/drivers/gpu/drm/pl111/Kconfig
@@ -3,6 +3,7 @@  config DRM_PL111
 	tristate "DRM Support for PL111 CLCD Controller"
 	depends on DRM
 	depends on ARM || ARM64 || COMPILE_TEST
+	depends on VEXPRESS_CONFIG || !VEXPRESS_CONFIG
 	depends on COMMON_CLK
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c
index 64f01a4e6767..451d74205108 100644
--- a/drivers/gpu/drm/pl111/pl111_versatile.c
+++ b/drivers/gpu/drm/pl111/pl111_versatile.c
@@ -476,7 +476,8 @@  int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 	versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
 
 	/* Versatile Express special handling */
-	if (versatile_clcd_type == VEXPRESS_CLCD_V2M) {
+	if (IS_ENABLED(CONFIG_VEXPRESS_CONFIG) &&
+	    versatile_clcd_type == VEXPRESS_CLCD_V2M) {
 		int ret = pl111_vexpress_clcd_init(dev, np, priv);
 		of_node_put(np);
 		if (ret)