diff mbox series

[RESEND,08/14] bus: mhi: core: Ensure non-zero session or sequence ID values are used

Message ID 20200521170249.21795-9-manivannan.sadhasivam@linaro.org
State New
Headers show
Series [RESEND,01/14] bus: mhi: core: Refactor mhi queue APIs | expand

Commit Message

Manivannan Sadhasivam May 21, 2020, 5:02 p.m. UTC 
From: Bhaumik Bhatt <bbhatt@codeaurora.org>

While writing any sequence or session identifiers, it is possible that
the host could write a zero value, whereas only non-zero values should
be supported writes to those registers. Ensure that the host does not
write a non-zero value for them and also log them in debug messages. A
macro is introduced to simplify this check and the existing checks are
also converted to use this macro.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/core/boot.c     | 15 +++++++--------
 drivers/bus/mhi/core/internal.h |  1 +
 2 files changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 80e4d7609aaa..0b38014d040e 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -43,10 +43,7 @@  void mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
 		      lower_32_bits(mhi_buf->dma_addr));
 
 	mhi_write_reg(mhi_cntrl, base, BHIE_RXVECSIZE_OFFS, mhi_buf->len);
-	sequence_id = prandom_u32() & BHIE_RXVECSTATUS_SEQNUM_BMSK;
-
-	if (unlikely(!sequence_id))
-		sequence_id = 1;
+	sequence_id = MHI_RANDOM_U32_NONZERO(BHIE_RXVECSTATUS_SEQNUM_BMSK);
 
 	mhi_write_reg_field(mhi_cntrl, base, BHIE_RXVECDB_OFFS,
 			    BHIE_RXVECDB_SEQNUM_BMSK, BHIE_RXVECDB_SEQNUM_SHFT,
@@ -189,7 +186,9 @@  static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 		return -EIO;
 	}
 
-	dev_dbg(dev, "Starting AMSS download via BHIe\n");
+	sequence_id = MHI_RANDOM_U32_NONZERO(BHIE_TXVECSTATUS_SEQNUM_BMSK);
+	dev_dbg(dev, "Starting AMSS download via BHIe. Sequence ID:%u\n",
+		sequence_id);
 	mhi_write_reg(mhi_cntrl, base, BHIE_TXVECADDR_HIGH_OFFS,
 		      upper_32_bits(mhi_buf->dma_addr));
 
@@ -198,7 +197,6 @@  static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 
 	mhi_write_reg(mhi_cntrl, base, BHIE_TXVECSIZE_OFFS, mhi_buf->len);
 
-	sequence_id = prandom_u32() & BHIE_TXVECSTATUS_SEQNUM_BMSK;
 	mhi_write_reg_field(mhi_cntrl, base, BHIE_TXVECDB_OFFS,
 			    BHIE_TXVECDB_SEQNUM_BMSK, BHIE_TXVECDB_SEQNUM_SHFT,
 			    sequence_id);
@@ -246,14 +244,15 @@  static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl,
 		goto invalid_pm_state;
 	}
 
-	dev_dbg(dev, "Starting SBL download via BHI\n");
+	session_id = MHI_RANDOM_U32_NONZERO(BHI_TXDB_SEQNUM_BMSK);
+	dev_dbg(dev, "Starting SBL download via BHI. Session ID:%u\n",
+		session_id);
 	mhi_write_reg(mhi_cntrl, base, BHI_STATUS, 0);
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGADDR_HIGH,
 		      upper_32_bits(dma_addr));
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGADDR_LOW,
 		      lower_32_bits(dma_addr));
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGSIZE, size);
-	session_id = prandom_u32() & BHI_TXDB_SEQNUM_BMSK;
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGTXDB, session_id);
 	read_unlock_bh(pm_lock);
 
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 0965ca3c9632..80b32c20149c 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -452,6 +452,7 @@  enum mhi_pm_state {
 #define PRIMARY_CMD_RING		0
 #define MHI_DEV_WAKE_DB			127
 #define MHI_MAX_MTU			0xffff
+#define MHI_RANDOM_U32_NONZERO(bmsk)	(prandom_u32_max(bmsk) + 1)
 
 enum mhi_er_type {
 	MHI_ER_TYPE_INVALID = 0x0,