| Message ID | 1588080785-6812-8-git-send-email-rnayak@codeaurora.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,01/17] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state | expand |
On 4/29/2020 5:57 AM, Matthias Kaehlcke wrote: > On Tue, Apr 28, 2020 at 07:02:55PM +0530, Rajendra Nayak wrote: >> Add the OPP tables for DSI and MDP based on the perf state/clk >> requirements, and add the power-domains property to specify the >> scalable power domain. >> >> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> >> --- >> arch/arm64/boot/dts/qcom/sdm845.dtsi | 59 ++++++++++++++++++++++++++++++++++++ >> 1 file changed, 59 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> index 36b9fb1..7a625ad 100644 >> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> @@ -3309,6 +3309,59 @@ >> #reset-cells = <1>; >> }; >> >> + mdp_opp_table: mdp-opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-19200000 { >> + opp-hz = /bits/ 64 <19200000>; >> + required-opps = <&rpmhpd_opp_min_svs>; >> + }; >> + >> + opp-171428571 { >> + opp-hz = /bits/ 64 <171428571>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + }; >> + >> + opp-344000000 { >> + opp-hz = /bits/ 64 <344000000>; >> + required-opps = <&rpmhpd_opp_svs_l1>; >> + }; >> + >> + opp-430000000 { >> + opp-hz = /bits/ 64 <430000000>; >> + required-opps = <&rpmhpd_opp_nom>; >> + }; >> + }; > > as commented on "[v3,03/17] arm64: dts: sdm845: Add OPP table for all qup > devices" (https://patchwork.kernel.org/patch/11514693/) this table should > probably be inside the 'mdp' node. right, I will move this and the below table inside the device nodes. > >> + >> + dsi_opp_table: dsi-opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-19200000 { >> + opp-hz = /bits/ 64 <19200000>; >> + required-opps = <&rpmhpd_opp_min_svs>; >> + }; >> + >> + opp-180000000 { >> + opp-hz = /bits/ 64 <180000000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + }; >> + >> + opp-275000000 { >> + opp-hz = /bits/ 64 <275000000>; >> + required-opps = <&rpmhpd_opp_svs>; >> + }; >> + >> + opp-328580000 { >> + opp-hz = /bits/ 64 <328580000>; >> + required-opps = <&rpmhpd_opp_svs_l1>; >> + }; >> + >> + opp-358000000 { >> + opp-hz = /bits/ 64 <358000000>; >> + required-opps = <&rpmhpd_opp_nom>; >> + }; >> + }; >> + > > depending on the outcome of the discussion mentioned above this might have > to move into the 'dsi0' node. >
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 36b9fb1..7a625ad 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3309,6 +3309,59 @@ #reset-cells = <1>; }; + mdp_opp_table: mdp-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-344000000 { + opp-hz = /bits/ 64 <344000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + dsi_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-328580000 { + opp-hz = /bits/ 64 <328580000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + mdss: mdss@ae00000 { compatible = "qcom,sdm845-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3353,6 +3406,8 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; assigned-clock-rates = <300000000>, <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; @@ -3399,6 +3454,8 @@ "core", "iface", "bus"; + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -3463,6 +3520,8 @@ "core", "iface", "bus"; + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi1_phy>; phy-names = "dsi";
Add the OPP tables for DSI and MDP based on the perf state/clk requirements, and add the power-domains property to specify the scalable power domain. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 59 ++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+)