@@ -97,6 +97,16 @@ die-temp@6 {
};
};
+ pm8150_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
@@ -95,6 +95,16 @@ chg-temp@9 {
};
};
+ pm8150b_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pm8150b_gpios: gpio@c000 {
compatible = "qcom,pm8150b-gpio";
reg = <0xc000>;
@@ -89,6 +89,16 @@ die-temp@6 {
};
};
+ pm8150l_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pm8150l_gpios: gpio@c000 {
compatible = "qcom,pm8150l-gpio";
reg = <0xc000>;
Define adc-tm5 thermal monitoring part. Individual channes and thermal zones are to be configured in per-device dts files. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/pm8150.dtsi | 10 ++++++++++ arch/arm64/boot/dts/qcom/pm8150b.dtsi | 10 ++++++++++ arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++ 3 files changed, 30 insertions(+) -- 2.27.0