@@ -226,6 +226,35 @@ static const struct file_operations clk_dump_fops = {
.release = single_release,
};
+#ifdef DEBUG
+static int clk_rate_fops_get(void *data, u64 *rate)
+{
+ struct clk *clk = data;
+
+ *rate = clk->rate;
+
+ return 0;
+};
+
+static int clk_rate_fops_set(void *data, u64 rate)
+{
+ struct clk *clk = data;
+ int ret = 0;
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto out;
+ clk_set_rate(clk, rate);
+ clk_disable_unprepare(clk);
+
+out:
+ return ret;
+};
+
+DEFINE_SIMPLE_ATTRIBUTE(clk_rate_fops, clk_rate_fops_get,
+ clk_rate_fops_set, "%llu\n");
+#endif
+
/* caller must hold prepare_lock */
static int clk_debug_create_one(struct clk *clk, struct dentry *pdentry)
{
@@ -243,8 +272,13 @@ static int clk_debug_create_one(struct clk *clk, struct dentry *pdentry)
clk->dentry = d;
+#ifdef DEBUG
+ d = debugfs_create_file("clk_rate", S_IWUSR | S_IRUGO, clk->dentry,
+ clk, &clk_rate_fops);
+#else
d = debugfs_create_u32("clk_rate", S_IRUGO, clk->dentry,
(u32 *)&clk->rate);
+#endif
if (!d)
goto err_out;
clk_rate_fops is added to debug 1. set_rate (e.g. PLL) 2. Choose mux parent, since mux could choose parent accordingly when set_rate. Causion: set_rate can be called directly from user space Example: sfc_mux have two parents: 24M and 200M cat clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc24mhz 3 3 24000000 bpll_fout3 0 0 200000000 sfc_mux 0 0 200000000 sfc 0 0 200000000 cat osc24mhz/bpll/bpll_fout3/sfc_mux/sfc/clk_rate 200000000 echo 24000000 > osc24mhz/bpll/bpll_fout3/sfc_mux/sfc/clk_rate cat clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc24mhz 3 3 24000000 sfc_mux 0 0 24000000 sfc 0 0 24000000 bpll_fout3 0 0 200000000 cat osc24mhz/sfc_mux/sfc/clk_rate 24000000 Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> --- drivers/clk/clk.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)