new file mode 100644
@@ -0,0 +1,316 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG EXYNOS5420 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG /* in a SAMSUNG core */
+#define CONFIG_S5P /* S5P Family */
+#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
+#define CONFIG_EXYNOS5420 /* which is in a Exynos5 Family */
+#define CONFIG_SMDK5420 /* which is in a SMDK5420 */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_COMMON
+
+/* Enable fdt support for Exynos5420 */
+
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-smdk5420
+
+#define CONFIG_OF_CONTROL
+#define CONFIG_ARCH_DEVICE_TREE exynos5420
+#define CONFIG_OF_SEPARATE
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_DCACHE_OFF
+
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_TEXT_BASE 0x23E00000
+
+#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
+#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
+
+/* input clock of PLL: SMDK5420 has 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_BOARD_REV_GPIO_COUNT 2
+
+
+/* MACH_TYPE_SMDK5420 macro will be removed once added to mach-types */
+#define MACH_TYPE_SMDK5420 8002 /* Temporary number */
+#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5420
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP 0x00000BAD
+#define S5P_CHECK_DIDLE 0xBAD00000
+#define S5P_CHECK_LPA 0xABAD0000
+
+/* Offset for inform registers */
+#define INFORM0_OFFSET 0x800
+#define INFORM1_OFFSET 0x804
+#define INFORM2_OFFSET 0x808
+#define INFORM3_OFFSET 0x80c
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL3 /* use SERIAL 2 */
+#define CONFIG_BAUDRATE 115200
+#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
+
+/* Console configuration */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define EXYNOS_DEVICE_SETTINGS \
+ "stdin=serial\0" \
+ "stdout=serial,lcd\0" \
+ "stderr=serial,lcd\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ EXYNOS_DEVICE_SETTINGS
+
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_S5P_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* PWM */
+#define CONFIG_PWM
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NET
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+/* USB */
+
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_EXYNOS
+#define CONFIG_USB_STORAGE
+
+/* MMC SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define COPY_BL2_FNPTR_ADDR 0x02020030
+#define CONFIG_SPL_GPIO_SUPPORT
+
+/* specific .lds file */
+#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
+#define CONFIG_SPL_TEXT_BASE 0x02024400
+#define CONFIG_SPL_MAX_SIZE (14 * 1024)
+#define CONFIG_SPL_MAX_FOOTPRINT (32 * 1024)
+
+#define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT "SMDK5420 # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+/*#define CONFIG_SYS_LOAD_ADDR 0x33E00000 */
+
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_RD_LVL
+
+#define CONFIG_NR_DRAM_BANKS 8
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_IDENT_STRING " for SMDK5420"
+
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_SECURE_BL1_ONLY
+
+/* Secure FW size configuration */
+#ifdef CONFIG_SECURE_BL1_ONLY
+#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
+#else
+#define CONFIG_SEC_FW_SIZE 0
+#endif
+
+/* Configuration of BL1, BL2, ENV Blocks on mmc */
+#define CONFIG_RES_BLOCK_SIZE (512)
+#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
+#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+
+#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
+#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
+#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
+
+/* U-boot copy size from boot Media to DRAM.*/
+#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
+#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
+
+#define OM_STAT (0x1f << 1)
+#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
+#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
+
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_IRAM_TOP 0x02074000
+
+/*
+ * Put the initial stack pointer 1KB below this to allow room for the
+ * SPL marker. This value is arbitrary, but gd_t is placed starting here.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800)
+
+/* The place where we put our SPL marker */
+#define CONFIG_SPL_MARKER (CONFIG_IRAM_TOP - 4)
+
+/* I2C */
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_HARD_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_MAX_I2C_NUM 8
+#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_I2C_EDID
+
+/* PMIC */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_I2C
+#define CONFIG_PMIC_MAX77686
+
+/* SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_EXYNOS_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 50000000
+#define EXYNOS5_SPI_NUM_CONTROLLERS 5
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MODE SPI_MODE_0
+#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+#define CONFIG_ENV_SPI_BUS 1
+#define CONFIG_ENV_SPI_BASE 0x12D30000
+#define CONFIG_ENV_SPI_MAX_HZ 50000000
+#endif
+
+/* Ethernet Controllor Driver */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE 0x5000000
+#define CONFIG_SMC911X_16_BIT
+#define CONFIG_ENV_SROM_BANK 1
+#endif /*CONFIG_CMD_NET*/
+
+/* Enable PXE Support */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
+#endif
+
+#define CONFIG_CMD_BOOTZ
+
+/* Sound */
+/* #define CONFIG_CMD_SOUND */
+#ifdef CONFIG_CMD_SOUND
+#define CONFIG_SOUND
+#define CONFIG_I2S
+#define CONFIG_SOUND_WM8994
+#endif
+
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
+
+/* SHA hashing */
+#define CONFIG_CMD_HASH
+#define CONFIG_HASH_VERIFY
+#define CONFIG_SHA1
+#define CONFIG_SHA256
+
+#endif /* __CONFIG_H */