@@ -34,6 +34,27 @@ static void adis_trigger_setup(struct adis *adis)
iio_trigger_set_drvdata(adis->trig, adis);
}
+static int adis_validate_irq_flag(struct adis *adis)
+{
+ /*
+ * Typically this devices have data ready either on the rising edge or
+ * on the falling edge of the data ready pin. This checks enforces that
+ * one of those is set in the drivers... It defaults to
+ * IRQF_TRIGGER_RISING for backward compatibility wiht devices that
+ * don't support changing the pin polarity.
+ */
+ if (!adis->irq_flag) {
+ adis->irq_flag = IRQF_TRIGGER_RISING;
+ return 0;
+ } else if (adis->irq_flag != IRQF_TRIGGER_RISING &&
+ adis->irq_flag != IRQF_TRIGGER_FALLING) {
+ dev_err(&adis->spi->dev, "Invalid IRQ mask: %08lx\n",
+ adis->irq_flag);
+ return -EINVAL;
+ }
+
+ return 0;
+}
/**
* adis_probe_trigger() - Sets up trigger for a adis device
* @adis: The adis device
@@ -54,9 +75,13 @@ int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
adis_trigger_setup(adis);
+ ret = adis_validate_irq_flag(adis);
+ if (ret)
+ return ret;
+
ret = request_irq(adis->spi->irq,
&iio_trigger_generic_data_rdy_poll,
- IRQF_TRIGGER_RISING,
+ adis->irq_flag,
indio_dev->name,
adis->trig);
if (ret)
@@ -96,9 +121,13 @@ int devm_adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
adis_trigger_setup(adis);
+ ret = adis_validate_irq_flag(adis);
+ if (ret)
+ return ret;
+
ret = devm_request_irq(&adis->spi->dev, adis->spi->irq,
&iio_trigger_generic_data_rdy_poll,
- IRQF_TRIGGER_RISING,
+ adis->irq_flag,
indio_dev->name,
adis->trig);
if (ret)
@@ -87,6 +87,7 @@ struct adis_data {
* @msg: SPI message object
* @xfer: SPI transfer objects to be used for a @msg
* @current_page: Some ADIS devices have registers, this selects current page
+ * @irq_flag: IRQ handling flags as passed to request_irq()
* @buffer: Data buffer for information read from the device
* @tx: DMA safe TX buffer for SPI transfers
* @rx: DMA safe RX buffer for SPI transfers
@@ -113,6 +114,7 @@ struct adis {
struct spi_message msg;
struct spi_transfer *xfer;
unsigned int current_page;
+ unsigned long irq_flag;
void *buffer;
uint8_t tx[10] ____cacheline_aligned;
There are some ADIS devices that can configure the data ready pin polarity. Hence, we cannot hardcode our IRQ mask as IRQF_TRIGGER_RISING since we might want to have it as IRQF_TRIGGER_FALLING. Signed-off-by: Nuno Sá <nuno.sa@analog.com> --- Changes in v2: * Add kernel doc-string for `irq-mask`. Changes in v3: * Removed unnecessary inline; * Renamed `__adis_validate_irq_mask` to `adis_validate_irq_mask` to keep lib consistency; * Cosmetics in logs. Changes in v4: * Use flag suffix instead of mask; * Add comments to `adis_validate_irq_flag`. drivers/iio/imu/adis_trigger.c | 33 +++++++++++++++++++++++++++++++-- include/linux/iio/imu/adis.h | 2 ++ 2 files changed, 33 insertions(+), 2 deletions(-)