diff mbox series

[2/4] ARM: dts: rockchip: remove clock-names property from 'generic-ohci' nodes

Message ID 20200312171441.21144-2-jbx6244@gmail.com
State New
Headers show
Series None | expand

Commit Message

Johan Jonker March 12, 2020, 5:14 p.m. UTC 
A test with the command below gives for example this error:

arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30160000:
'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'

'clock-names' is not a valid property name for usb_host nodes with
compatible string 'generic-ohci', so remove them.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ohci.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm/boot/dts/rk322x.dtsi | 3 ---
 arch/arm/boot/dts/rv1108.dtsi | 1 -
 2 files changed, 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 6503247e9..06172ebbf 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -732,7 +732,6 @@ 
 		reg = <0x300a0000 0x20000>;
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy0>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy0_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -753,7 +752,6 @@ 
 		reg = <0x300e0000 0x20000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST1>, <&u2phy1>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy1_otg>;
 		phy-names = "usb";
 		status = "disabled";
@@ -774,7 +772,6 @@ 
 		reg = <0x30120000 0x20000>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST2>, <&u2phy1>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy1_host>;
 		phy-names = "usb";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index d33e606be..153868c62 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -505,7 +505,6 @@ 
 		reg = <0x30160000 0x20000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";