@@ -2280,11 +2280,11 @@
&l4_per2 { /* 0x48400000 */
compatible = "ti,dra7-l4-per2", "simple-bus";
- reg = <0x48400000 0x800>,
- <0x48400800 0x800>,
- <0x48401000 0x400>,
- <0x48401400 0x400>,
- <0x48401800 0x400>;
+ reg = <0x48400000 0x0 0x800>,
+ <0x48400800 0x0 0x800>,
+ <0x48401000 0x0 0x400>,
+ <0x48401400 0x0 0x400>,
+ <0x48401800 0x0 0x400>;
reg-names = "ap", "la", "ia0", "ia1", "ia2";
#address-cells = <1>;
#size-cells = <1>;
@@ -3152,11 +3152,11 @@
&l4_per3 { /* 0x48800000 */
compatible = "ti,dra7-l4-per3", "simple-bus";
- reg = <0x48800000 0x800>,
- <0x48800800 0x800>,
- <0x48801000 0x400>,
- <0x48801400 0x400>,
- <0x48801800 0x400>;
+ reg = <0x48800000 0x0 0x800>,
+ <0x48800800 0x0 0x800>,
+ <0x48801000 0x0 0x400>,
+ <0x48801400 0x0 0x400>,
+ <0x48801800 0x0 0x400>;
reg-names = "ap", "la", "ia0", "ia1", "ia2";
#address-cells = <1>;
#size-cells = <1>;
@@ -146,8 +146,9 @@
ocp {
compatible = "ti,dra7-l3-noc", "simple-bus";
#address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x0 0xc0000000>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x0 0xc0000000>;
+ dma-ranges = <0x0 0x0 0x0 0x1 0x00000000>;
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x0 0x44000000 0x0 0x1000000>,
<0x0 0x45000000 0x0 0x1000>;
@@ -261,7 +262,7 @@
ocmcram1: ocmcram@40300000 {
compatible = "mmio-sram";
- reg = <0x40300000 0x80000>;
+ reg = <0x40300000 0x0 0x80000>;
ranges = <0x0 0x40300000 0x80000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -291,7 +292,7 @@
ocmcram2: ocmcram@40400000 {
status = "disabled";
compatible = "mmio-sram";
- reg = <0x40400000 0x100000>;
+ reg = <0x40400000 0x0 0x100000>;
ranges = <0x0 0x40400000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -300,19 +301,19 @@
ocmcram3: ocmcram@40500000 {
status = "disabled";
compatible = "mmio-sram";
- reg = <0x40500000 0x100000>;
+ reg = <0x40500000 0x0 0x100000>;
ranges = <0x0 0x40500000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
};
bandgap: bandgap@4a0021e0 {
- reg = <0x4a0021e0 0xc
- 0x4a00232c 0xc
- 0x4a002380 0x2c
- 0x4a0023C0 0x3c
- 0x4a002564 0x8
- 0x4a002574 0x50>;
+ reg = <0x4a0021e0 0x0 0xc
+ 0x4a00232c 0x0 0xc
+ 0x4a002380 0x0 0x2c
+ 0x4a0023C0 0x0 0x3c
+ 0x4a002564 0x0 0x8
+ 0x4a002574 0x0 0x50>;
compatible = "ti,dra752-bandgap";
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <1>;
@@ -320,12 +321,12 @@
dsp1_system: dsp_system@40d00000 {
compatible = "syscon";
- reg = <0x40d00000 0x100>;
+ reg = <0x40d00000 0x0 0x100>;
};
dra7_iodelay_core: padconf@4844a000 {
compatible = "ti,dra7-iodelay";
- reg = <0x4844a000 0x0d1c>;
+ reg = <0x4844a000 0x0 0x0d1c>;
#address-cells = <1>;
#size-cells = <0>;
#pinctrl-cells = <2>;
@@ -334,7 +335,7 @@
edma: edma@43300000 {
compatible = "ti,edma3-tpcc";
ti,hwmods = "tpcc";
- reg = <0x43300000 0x100000>;
+ reg = <0x43300000 0x0 0x100000>;
reg-names = "edma3_cc";
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
@@ -357,7 +358,7 @@
edma_tptc0: tptc@43400000 {
compatible = "ti,edma3-tptc";
ti,hwmods = "tptc0";
- reg = <0x43400000 0x100000>;
+ reg = <0x43400000 0x0 0x100000>;
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
@@ -365,23 +366,23 @@
edma_tptc1: tptc@43500000 {
compatible = "ti,edma3-tptc";
ti,hwmods = "tptc1";
- reg = <0x43500000 0x100000>;
+ reg = <0x43500000 0x0 0x100000>;
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
dmm@4e000000 {
compatible = "ti,omap5-dmm";
- reg = <0x4e000000 0x800>;
+ reg = <0x4e000000 0x0 0x800>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dmm";
};
target-module@40d01000 {
compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x40d01000 0x4>,
- <0x40d01010 0x4>,
- <0x40d01014 0x4>;
+ reg = <0x40d01000 0x0 0x4>,
+ <0x40d01010 0x0 0x4>,
+ <0x40d01014 0x0 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@@ -408,9 +409,9 @@
target-module@40d02000 {
compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x40d02000 0x4>,
- <0x40d02010 0x4>,
- <0x40d02014 0x4>;
+ reg = <0x40d02000 0x0 0x4>,
+ <0x40d02010 0x0 0x4>,
+ <0x40d02014 0x0 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@@ -437,9 +438,9 @@
target-module@58882000 {
compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x58882000 0x4>,
- <0x58882010 0x4>,
- <0x58882014 0x4>;
+ reg = <0x58882000 0x0 0x4>,
+ <0x58882010 0x0 0x4>,
+ <0x58882014 0x0 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@@ -466,9 +467,9 @@
target-module@55082000 {
compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x55082000 0x4>,
- <0x55082010 0x4>,
- <0x55082014 0x4>;
+ reg = <0x55082000 0x0 0x4>,
+ <0x55082010 0x0 0x4>,
+ <0x55082014 0x0 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@@ -502,9 +503,9 @@
ti,settling-time = <50>;
ti,clock-cycles = <16>;
- reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
- <0x4ae06014 0x4>, <0x4a003b20 0xc>,
- <0x4ae0c158 0x4>;
+ reg = <0x4ae07ddc 0x0 0x4>, <0x4ae07de0 0x0 0x4>,
+ <0x4ae06014 0x0 0x4>, <0x4a003b20 0x0 0xc>,
+ <0x4ae0c158 0x0 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
@@ -535,9 +536,9 @@
ti,settling-time = <50>;
ti,clock-cycles = <16>;
- reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
- <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
- <0x4a002470 0x4>;
+ reg = <0x4ae07e34 0x0 0x4>, <0x4ae07e24 0x0 0x4>,
+ <0x4ae06010 0x0 0x4>, <0x4a0025cc 0x0 0xc>,
+ <0x4a002470 0x0 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
@@ -568,9 +569,9 @@
ti,settling-time = <50>;
ti,clock-cycles = <16>;
- reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
- <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
- <0x4a00246c 0x4>;
+ reg = <0x4ae07e30 0x0 0x4>, <0x4ae07e20 0x0 0x4>,
+ <0x4ae06010 0x0 0x4>, <0x4a0025e0 0x0 0xc>,
+ <0x4a00246c 0x0 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
@@ -601,9 +602,9 @@
ti,settling-time = <50>;
ti,clock-cycles = <16>;
- reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
- <0x4ae06010 0x4>, <0x4a003b08 0xc>,
- <0x4ae0c154 0x4>;
+ reg = <0x4ae07de4 0x0 0x4>, <0x4ae07de8 0x0 0x4>,
+ <0x4ae06010 0x0 0x4>, <0x4a003b08 0x0 0xc>,
+ <0x4ae0c154 0x0 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
@@ -627,8 +628,8 @@
qspi: spi@4b300000 {
compatible = "ti,dra7xxx-qspi";
- reg = <0x4b300000 0x100>,
- <0x5c000000 0x4000000>;
+ reg = <0x4b300000 0x0 0x100>,
+ <0x5c000000 0x0 0x4000000>;
reg-names = "qspi_base", "qspi_mmap";
syscon-chipselects = <&scm_conf 0x558>;
#address-cells = <1>;
@@ -644,7 +645,7 @@
/* OCP2SCP3 */
sata: sata@4a141100 {
compatible = "snps,dwc-ahci";
- reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+ reg = <0x4a140000 0x0 0x1100>, <0x4a141100 0x0 0x7>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
phys = <&sata_phy>;
phy-names = "sata-phy";
@@ -658,7 +659,7 @@
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
- reg = <0x50000000 0x37c>; /* device IO registers */
+ reg = <0x50000000 0x0 0x37c>; /* device IO registers */
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma_xbar 4 0>;
dma-names = "rxtx";
@@ -675,8 +676,8 @@
target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x5600fe00 0x4>,
- <0x5600fe10 0x4>;
+ reg = <0x5600fe00 0x0 0x4>,
+ <0x5600fe10 0x0 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@@ -693,7 +694,7 @@
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
- reg = <0x4a002a48 0x130>;
+ reg = <0x4a002a48 0x0 0x130>;
interrupt-controller;
interrupt-parent = <&wakeupgen>;
#interrupt-cells = <3>;
@@ -715,11 +716,11 @@
syscon-pll-ctrl = <&scm_conf 0x538>;
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x0 0x58000000 0x79000>;
dispc@58001000 {
compatible = "ti,dra7-dispc";
- reg = <0x58001000 0x1000>;
+ reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dss_dispc";
clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
@@ -730,10 +731,10 @@
hdmi: encoder@58060000 {
compatible = "ti,dra7-hdmi";
- reg = <0x58040000 0x200>,
- <0x58040200 0x80>,
- <0x58040300 0x80>,
- <0x58060000 0x19000>;
+ reg = <0x40000 0x200>,
+ <0x40200 0x80>,
+ <0x40300 0x80>,
+ <0x60000 0x19000>;
reg-names = "wp", "pll", "phy", "core";
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -748,9 +749,9 @@
aes1_target: target-module@4b500000 {
compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x4b500080 0x4>,
- <0x4b500084 0x4>,
- <0x4b500088 0x4>;
+ reg = <0x4b500080 0x0 0x4>,
+ <0x4b500084 0x0 0x4>,
+ <0x4b500088 0x0 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
@@ -779,9 +780,9 @@
aes2_target: target-module@4b700000 {
compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x4b700080 0x4>,
- <0x4b700084 0x4>,
- <0x4b700088 0x4>;
+ reg = <0x4b700080 0x0 0x4>,
+ <0x4b700084 0x0 0x4>,
+ <0x4b700088 0x0 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
@@ -810,9 +811,9 @@
sham_target: target-module@4b101000 {
compatible = "ti,sysc-omap3-sham", "ti,sysc";
- reg = <0x4b101100 0x4>,
- <0x4b101110 0x4>,
- <0x4b101114 0x4>;
+ reg = <0x4b101100 0x0 0x4>,
+ <0x4b101110 0x0 0x4>,
+ <0x4b101114 0x0 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
@@ -840,7 +841,7 @@
opp_supply_mpu: opp-supply@4a003b20 {
compatible = "ti,omap5-opp-supply";
- reg = <0x4a003b20 0xc>;
+ reg = <0x4a003b20 0x0 0xc>;
ti,efuse-settings = <
/* uV offset */
1060000 0x0
@@ -60,9 +60,9 @@
};
&dss {
- reg = <0x58000000 0x80>,
- <0x58004054 0x4>,
- <0x58004300 0x20>;
+ reg = <0x58000000 0x0 0x80>,
+ <0x58004054 0x0 0x4>,
+ <0x58004300 0x0 0x20>;
reg-names = "dss", "pll1_clkctrl", "pll1";
clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
@@ -39,22 +39,23 @@
ocp {
dsp2_system: dsp_system@41500000 {
compatible = "syscon";
- reg = <0x41500000 0x100>;
+ reg = <0x41500000 0x0 0x100>;
};
omap_dwc3_4: omap_dwc3_4@48940000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss4";
- reg = <0x48940000 0x10000>;
+ reg = <0x48940000 0x0 0x10000>;
interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
- ranges;
+ ranges = <0x0 0x48940000 0x20000>;
status = "disabled";
- usb4: usb@48950000 {
+
+ usb4: usb@10000 {
compatible = "snps,dwc3";
- reg = <0x48950000 0x17000>;
+ reg = <0x10000 0x17000>;
interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
@@ -68,9 +69,9 @@
target-module@41501000 {
compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x41501000 0x4>,
- <0x41501010 0x4>,
- <0x41501014 0x4>;
+ reg = <0x41501000 0x0 0x4>,
+ <0x41501010 0x0 0x4>,
+ <0x41501014 0x0 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@@ -97,9 +98,9 @@
target-module@41502000 {
compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x41502000 0x4>,
- <0x41502010 0x4>,
- <0x41502014 0x4>;
+ reg = <0x41502000 0x0 0x4>,
+ <0x41502010 0x0 0x4>,
+ <0x41502014 0x0 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@@ -132,11 +133,11 @@
};
&dss {
- reg = <0x58000000 0x80>,
- <0x58004054 0x4>,
- <0x58004300 0x20>,
- <0x58009054 0x4>,
- <0x58009300 0x20>;
+ reg = <0x58000000 0x0 0x80>,
+ <0x58004054 0x0 0x4>,
+ <0x58004300 0x0 0x20>,
+ <0x58009054 0x0 0x4>,
+ <0x58009300 0x0 0x20>;
reg-names = "dss", "pll1_clkctrl", "pll1",
"pll2_clkctrl", "pll2";
The L3 interconnect can access only 32-bits of address. Add the dma-ranges property to reflect this limit. This will ensure that no device under L3 is given > 32-bit address for DMA. Issue was observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE enabled. This is because the controller can perform 64-bit DMA and was setting the dma_mask to 64-bit. Setting the correct bus_dma_limit fixes the issue. Signed-off-by: Roger Quadros <rogerq@ti.com> --- arch/arm/boot/dts/dra7-l4.dtsi | 20 ++--- arch/arm/boot/dts/dra7.dtsi | 129 +++++++++++++++++---------------- arch/arm/boot/dts/dra72x.dtsi | 6 +- arch/arm/boot/dts/dra74x.dtsi | 33 +++++---- 4 files changed, 95 insertions(+), 93 deletions(-)