diff mbox series

[1/1] media: ti-vpe: cal: fix disable_irqs to only the intended target

Message ID 20200302135652.9365-1-bparrot@ti.com
State New
Headers show
Series [1/1] media: ti-vpe: cal: fix disable_irqs to only the intended target | expand

Commit Message

Benoit Parrot March 2, 2020, 1:56 p.m. UTC 
disable_irqs() was mistakenly disabling all interrupts when called.
This cause all port stream to stop even if only stopping one of them.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/cal.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 6e009e479be3..6d4cbb8782ed 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -722,16 +722,16 @@  static void enable_irqs(struct cal_ctx *ctx)
 
 static void disable_irqs(struct cal_ctx *ctx)
 {
+	u32 val;
+
 	/* Disable IRQ_WDMA_END 0/1 */
-	reg_write_field(ctx->dev,
-			CAL_HL_IRQENABLE_CLR(2),
-			CAL_HL_IRQ_CLEAR,
-			CAL_HL_IRQ_MASK(ctx->csi2_port));
+	val = 0;
+	set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(2), val);
 	/* Disable IRQ_WDMA_START 0/1 */
-	reg_write_field(ctx->dev,
-			CAL_HL_IRQENABLE_CLR(3),
-			CAL_HL_IRQ_CLEAR,
-			CAL_HL_IRQ_MASK(ctx->csi2_port));
+	val = 0;
+	set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(3), val);
 	/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
 	reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0);
 }