@@ -40,7 +40,7 @@
cpu0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a35", "arm,armv8";
+ compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
clocks = <&cru ARMCLK>;
@@ -53,7 +53,7 @@
cpu1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a35", "arm,armv8";
+ compatible = "arm,cortex-a35";
reg = <0x0 0x1>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
@@ -63,7 +63,7 @@
cpu2: cpu@2 {
device_type = "cpu";
- compatible = "arm,cortex-a35", "arm,armv8";
+ compatible = "arm,cortex-a35";
reg = <0x0 0x2>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
@@ -73,7 +73,7 @@
cpu3: cpu@3 {
device_type = "cpu";
- compatible = "arm,cortex-a35", "arm,armv8";
+ compatible = "arm,cortex-a35";
reg = <0x0 0x3>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
A test with the command below gives for example these errors: arch/arm64/boot/dts/rockchip/rk3308-evb.dt.yaml: cpu@0: compatible: Additional items are not allowed ('arm,armv8' was unexpected) arch/arm64/boot/dts/rockchip/rk3308-evb.dt.yaml: cpu@0: compatible: ['arm,cortex-a35', 'arm,armv8'] is too long Fix these errors by removing the last argument of the cpu compatible property in rk3308.dtsi. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/cpus.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)