@@ -394,38 +394,6 @@ qspi: spi@0 {
};
};
- dss: dss@4832a000 {
- compatible = "ti,omap3-dss";
- reg = <0x4832a000 0x200>;
- status = "disabled";
- ti,hwmods = "dss_core";
- clocks = <&disp_clk>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dispc: dispc@4832a400 {
- compatible = "ti,omap3-dispc";
- reg = <0x4832a400 0x400>;
- interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "dss_dispc";
- clocks = <&disp_clk>;
- clock-names = "fck";
-
- max-memory-bandwidth = <230000000>;
- };
-
- rfbi: rfbi@4832a800 {
- compatible = "ti,omap3-rfbi";
- reg = <0x4832a800 0x100>;
- ti,hwmods = "dss_rfbi";
- clocks = <&disp_clk>;
- clock-names = "fck";
- status = "disabled";
- };
- };
-
ocmcram: sram@40300000 {
compatible = "mmio-sram";
reg = <0x40300000 0x40000>; /* 256k */
@@ -2135,6 +2135,41 @@ target-module@2a000 { /* 0x4832a000, ap 88 3c.0 */
<0x00000800 0x0002a800 0x00000400>,
<0x00000c00 0x0002ac00 0x00000400>,
<0x00001000 0x0002b000 0x00001000>;
+
+ dss: dss@0 {
+ compatible = "ti,omap3-dss";
+ reg = <0 0x200>;
+ status = "disabled";
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x00000400>,
+ <0x00000400 0x00000400 0x00000400>,
+ <0x00000800 0x00000800 0x00000400>,
+ <0x00000c00 0x00000c00 0x00000400>,
+ <0x00001000 0x00001000 0x00001000>;
+
+ dispc: dispc@4000 {
+ compatible = "ti,omap3-dispc";
+ reg = <0x400 0x400>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dispc";
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+
+ max-memory-bandwidth = <230000000>;
+ };
+
+ rfbi: rfbi@800 {
+ compatible = "ti,omap3-rfbi";
+ reg = <0x800 0x100>;
+ ti,hwmods = "dss_rfbi";
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
};
target-module@3d000 { /* 0x4833d000, ap 102 6e.0 */
On am437x, the display subsystem (DSS) is on l4. We already have the interconnect target module for it, so let's just move dss there. To do that, we need to adjust the module addresses for the ranges, and use the ranges already added earlier based on reading the l4 interconnect instance AP registers. Cc: Jyri Sarha <jsarha@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/am4372.dtsi | 32 ----------------------------- arch/arm/boot/dts/am437x-l4.dtsi | 35 ++++++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+), 32 deletions(-)