[1/3,v2] dt-bindings: clock: Create YAML schema for ICST clocks

diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
new file mode 100644
index 000000000000..06c4d84e8c3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
@@ -0,0 +1,102 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM System Conctroller ICST Clocks
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+description: The ICS525 and ICS307 oscillators are produced by Integrated
+  Devices Technology (IDT). ARM integrated these oscillators deeply into their
+  reference designs by adding special control registers that manage such
+  oscillators to their system controllers.
+
+  The various ARM system controllers contain logic to serialize and initialize
+  an ICST clock request after a write to the 32 bit register at an offset
+  into the system controller. Furthermore, to even be able to alter one of
+  these frequencies, the system controller must first be unlocked by
+  writing a special token to another offset in the system controller.
+
+  Some ARM hardware contain special versions of the serial interface that only
+  connects the low 8 bits of the VDW (missing one bit), hardwires RDW to
+  different values and sometimes also hardwire the output divider. They
+  therefore have special compatible strings as per this table (the OD value is
+  the value on the pins, not the resulting output divider).
+
+  In the core modules and logic tiles, the ICST is a configurable clock fed
+  from a 24 MHz clock on the motherboard (usually the main crystal) used for
+  generating e.g. video clocks. It is located on the core module and there is
+  only one of these. This clock node must be a subnode of the core module.
+
+  Hardware variant         RDW     OD          VDW
+
+  Integrator/AP            22      1           Bit 8 0, rest variable
+  integratorap-cm
+
+  Integrator/AP            46      3           Bit 8 0, rest variable
+  integratorap-sys
+
+  Integrator/AP            22 or   1           17 or (33 or 25 MHz)
+  integratorap-pci         14      1           14
+
+  Integrator/CP            22      variable    Bit 8 0, rest variable
+  integratorcp-cm-core
+
+  Integrator/CP            22      variable    Bit 8 0, rest variable
+  integratorcp-cm-mem
+
+  The ICST oscillator must be provided inside a system controller node.
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - arm,syscon-icst525
+      - arm,syscon-icst307
+      - arm,syscon-icst525-integratorap-cm
+      - arm,syscon-icst525-integratorap-sys
+      - arm,syscon-icst525-integratorap-pci
+      - arm,syscon-icst525-integratorcp-cm-core
+      - arm,syscon-icst525-integratorcp-cm-mem
+      - arm,integrator-cm-auxosc
+      - arm,versatile-cm-auxosc
+      - arm,impd-vco1
+      - arm,impd-vco2
+
+  clocks:
+    description: Parent clock for the ICST VCO
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  lock-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: Offset to the unlocking register for the oscillator
+
+  vco-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: Offset to the VCO register for the oscillator
+
+required:
+  - "#clock-cells"
+  - compatible
+  - clocks
+
+examples:
+  - |
+    vco1: clock@00 {
+      compatible = "arm,impd1-vco1";
+      #clock-cells = <0>;
+      lock-offset = <0x08>;
+      vco-offset = <0x00>;
+      clocks = <&sysclk>;
+      clock-output-names = "IM-PD1-VCO1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt
deleted file mode 100644
index 11f5f95f571b..000000000000
--- a/Documentation/devicetree/bindings/clock/arm-integrator.txt
+++ /dev/null
@@ -1,34 +0,0 @@ 
-Clock bindings for ARM Integrator and Versatile Core Module clocks
-
-Auxiliary Oscillator Clock
-
-This is a configurable clock fed from a 24 MHz chrystal,
-used for generating e.g. video clocks. It is located on the
-core module and there is only one of these.
-
-This clock node *must* be a subnode of the core module, since
-it obtains the base address for it's address range from its
-parent node.
-
-
-Required properties:
-- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc"
-- #clock-cells: must be <0>
-
-Optional properties:
-- clocks: parent clock(s)
-
-Example:
-
-core-module@10000000 {
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-	auxosc: cm_aux_osc@25M {
-		#clock-cells = <0>;
-		compatible = "arm,integrator-cm-auxosc";
-		clocks = <&xtal24mhz>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
deleted file mode 100644
index 4cd81742038f..000000000000
--- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
+++ /dev/null
@@ -1,70 +0,0 @@ 
-ARM System Controller ICST clocks
-
-The ICS525 and ICS307 oscillators are produced by Integrated Devices
-Technology (IDT). ARM integrated these oscillators deeply into their
-reference designs by adding special control registers that manage such
-oscillators to their system controllers.
-
-The various ARM system controllers contain logic to serialize and initialize
-an ICST clock request after a write to the 32 bit register at an offset
-into the system controller. Furthermore, to even be able to alter one of
-these frequencies, the system controller must first be unlocked by
-writing a special token to another offset in the system controller.
-
-Some ARM hardware contain special versions of the serial interface that only
-connects the low 8 bits of the VDW (missing one bit), hardwires RDW to
-different values and sometimes also hardwire the output divider. They
-therefore have special compatible strings as per this table (the OD value is
-the value on the pins, not the resulting output divider):
-
-Hardware variant:        RDW     OD          VDW
-
-Integrator/AP            22      1           Bit 8 0, rest variable
-integratorap-cm
-
-Integrator/AP            46      3           Bit 8 0, rest variable
-integratorap-sys
-
-Integrator/AP            22 or   1           17 or (33 or 25 MHz)
-integratorap-pci         14      1           14
-
-Integrator/CP            22      variable    Bit 8 0, rest variable
-integratorcp-cm-core
-
-Integrator/CP            22      variable    Bit 8 0, rest variable
-integratorcp-cm-mem
-
-The ICST oscillator must be provided inside a system controller node.
-
-Required properties:
-- compatible: must be one of
-  "arm,syscon-icst525"
-  "arm,syscon-icst307"
-  "arm,syscon-icst525-integratorap-cm"
-  "arm,syscon-icst525-integratorap-sys"
-  "arm,syscon-icst525-integratorap-pci"
-  "arm,syscon-icst525-integratorcp-cm-core"
-  "arm,syscon-icst525-integratorcp-cm-mem"
-- lock-offset: the offset address into the system controller where the
-  unlocking register is located
-- vco-offset: the offset address into the system controller where the
-  ICST control register is located (even 32 bit address)
-- #clock-cells: must be <0>
-- clocks: parent clock, since the ICST needs a parent clock to derive its
-  frequency from, this attribute is compulsory.
-
-Example:
-
-syscon: syscon@10000000 {
-	compatible = "syscon";
-	reg = <0x10000000 0x1000>;
-
-	oscclk0: osc0@c {
-		compatible = "arm,syscon-icst307";
-		#clock-cells = <0>;
-		lock-offset = <0x20>;
-		vco-offset = <0x0c>;
-		clocks = <&xtal24mhz>;
-	};
-	(...)
-};