| Message ID | 20200102141246.370-2-geert+renesas@glider.be |
|---|---|
| State | New |
| Headers | show |
| Series | drm: Add support for Okaya RH128128T | expand |
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt index cd5c7186890a2be7..87ebdcb294e29798 100644 --- a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt +++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt @@ -4,7 +4,9 @@ This binding is for display panels using a Sitronix ST7735R controller in SPI mode. Required properties: -- compatible: "jianda,jd-t18003-t01", "sitronix,st7735r" +- compatible: Must be one of the following combinations: + - "jianda,jd-t18003-t01", "sitronix,st7735r" + - "okaya,rh128128t", "sitronix,st7715r" - dc-gpios: Display data/command selection (D/CX) - reset-gpios: Reset signal (RSTX)
Document support for the Okaya RH128128T display, which is a 128x128 1.44" TFT display driven by a Sitronix ST7715R TFT Controller/Driver. ST7715R and ST7735R are very similar. Their major difference is that the former is restricted to displays of up to 132x132 pixels, while the latter supports displays up to 132x162 pixels. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- .../devicetree/bindings/display/sitronix,st7735r.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)