diff mbox

[05/10,V4] Exynos5420: Add support for 5420 in pinmux and gpio

Message ID 1380283855-8070-6-git-send-email-rajeshwari.s@samsung.com
State New
Headers show

Commit Message

Rajeshwari Shinde Sept. 27, 2013, 12:10 p.m. UTC
Adds code in pinmux and gpio framework to support Exynos5420.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
---
Changes in V2:
	- None
Changes in V3:
	- None
Changes in V4:
	- Added correct calculation of gpio based addresses.
 arch/arm/cpu/armv7/exynos/pinmux.c        | 245 +++++++++++++++++++++++++++++-
 arch/arm/include/asm/arch-exynos/gpio.h   | 143 +++++++++++++++--
 arch/arm/include/asm/arch-exynos/periph.h |   3 +
 3 files changed, 374 insertions(+), 17 deletions(-)

Comments

Simon Glass Oct. 8, 2013, 5:36 p.m. UTC | #1
On Fri, Sep 27, 2013 at 6:10 AM, Rajeshwari S Shinde <
rajeshwari.s@samsung.com> wrote:

> Adds code in pinmux and gpio framework to support Exynos5420.
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
>

Acked-by: Simon Glass <sjg@chromium.org>
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 1b05ebf..e7bc9d0 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -46,6 +46,41 @@  static void exynos5_uart_config(int peripheral)
 	}
 }
 
+static void exynos5420_uart_config(int peripheral)
+{
+	struct exynos5420_gpio_part1 *gpio1 =
+		(struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1();
+	struct s5p_gpio_bank *bank;
+	int i, start, count;
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+		bank = &gpio1->a0;
+		start = 0;
+		count = 4;
+		break;
+	case PERIPH_ID_UART1:
+		bank = &gpio1->a0;
+		start = 4;
+		count = 4;
+		break;
+	case PERIPH_ID_UART2:
+		bank = &gpio1->a1;
+		start = 0;
+		count = 4;
+		break;
+	case PERIPH_ID_UART3:
+		bank = &gpio1->a1;
+		start = 4;
+		count = 2;
+		break;
+	}
+	for (i = start; i < start + count; i++) {
+		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+	}
+}
+
 static int exynos5_mmc_config(int peripheral, int flags)
 {
 	struct exynos5_gpio_part1 *gpio1 =
@@ -101,6 +136,70 @@  static int exynos5_mmc_config(int peripheral, int flags)
 	return 0;
 }
 
+static int exynos5420_mmc_config(int peripheral, int flags)
+{
+	struct exynos5420_gpio_part3 *gpio3 =
+		(struct exynos5420_gpio_part3 *)samsung_get_base_gpio_part3();
+	struct s5p_gpio_bank *bank = NULL, *bank_ext = NULL;
+	int i, start = 0, gpio_func = 0;
+
+	switch (peripheral) {
+	case PERIPH_ID_SDMMC0:
+		bank = &gpio3->c0;
+		bank_ext = &gpio3->c3;
+		start = 0;
+		gpio_func = GPIO_FUNC(0x2);
+		break;
+	case PERIPH_ID_SDMMC1:
+		bank = &gpio3->c1;
+		bank_ext = &gpio3->d1;
+		start = 4;
+		gpio_func = GPIO_FUNC(0x2);
+		break;
+	case PERIPH_ID_SDMMC2:
+		bank = &gpio3->c2;
+		bank_ext = NULL;
+		gpio_func = GPIO_FUNC(0x2);
+		break;
+	}
+	if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
+		debug("SDMMC device %d does not support 8bit mode",
+		      peripheral);
+		return -1;
+	}
+	if (flags & PINMUX_FLAG_8BIT_MODE) {
+		for (i = start; i <= (start + 3); i++) {
+			s5p_gpio_cfg_pin(bank_ext, i, gpio_func);
+			s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
+			s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
+		}
+	}
+	for (i = 0; i < 3; i++) {
+		/*
+		 * MMC0 is intended to be used for eMMC. The
+		 * card detect pin is used as a VDDEN signal to
+		 * power on the eMMC. The 5420 iROM makes
+		 * this same assumption.
+		 */
+		if ((peripheral == PERIPH_ID_SDMMC0) && (i == 2)) {
+			s5p_gpio_set_value(bank, i, 1);
+			s5p_gpio_cfg_pin(bank, i, GPIO_OUTPUT);
+		} else {
+			s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+		}
+		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+	}
+
+	for (i = 3; i <= 6; i++) {
+		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+		s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
+		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+	}
+
+	return 0;
+}
+
 static void exynos5_sromc_config(int flags)
 {
 	struct exynos5_gpio_part1 *gpio1 =
@@ -216,6 +315,59 @@  static void exynos5_i2c_config(int peripheral, int flags)
 	}
 }
 
+static void exynos5420_i2c_config(int peripheral)
+{
+	struct exynos5420_gpio_part1 *gpio1 =
+		(struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1();
+
+	switch (peripheral) {
+	case PERIPH_ID_I2C0:
+		s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C1:
+		s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C2:
+		s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C3:
+		s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C4:
+		s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C5:
+		s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C6:
+		s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4));
+		s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4));
+		break;
+	case PERIPH_ID_I2C7:
+		s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C8:
+		s5p_gpio_cfg_pin(&gpio1->b3, 4, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b3, 5, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C9:
+		s5p_gpio_cfg_pin(&gpio1->b3, 6, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b3, 7, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C10:
+		s5p_gpio_cfg_pin(&gpio1->b4, 0, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b4, 1, GPIO_FUNC(0x2));
+		break;
+	}
+}
+
 static void exynos5_i2s_config(int peripheral)
 {
 	int i;
@@ -269,6 +421,49 @@  void exynos5_spi_config(int peripheral)
 	}
 }
 
+void exynos5420_spi_config(int peripheral)
+{
+	int cfg = 0, pin = 0, i;
+	struct s5p_gpio_bank *bank = NULL;
+	struct exynos5420_gpio_part1 *gpio1 =
+		(struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1();
+	struct exynos5420_gpio_part4 *gpio4 =
+		(struct exynos5420_gpio_part4 *)samsung_get_base_gpio_part4();
+
+	switch (peripheral) {
+	case PERIPH_ID_SPI0:
+		bank = &gpio1->a2;
+		cfg = GPIO_FUNC(0x2);
+		pin = 0;
+		break;
+	case PERIPH_ID_SPI1:
+		bank = &gpio1->a2;
+		cfg = GPIO_FUNC(0x2);
+		pin = 4;
+		break;
+	case PERIPH_ID_SPI2:
+		bank = &gpio1->b1;
+		cfg = GPIO_FUNC(0x5);
+		pin = 1;
+		break;
+	case PERIPH_ID_SPI3:
+		bank = &gpio4->f1;
+		cfg = GPIO_FUNC(0x2);
+		pin = 0;
+		break;
+	case PERIPH_ID_SPI4:
+		for (i = 0; i < 2; i++) {
+			s5p_gpio_cfg_pin(&gpio4->f0, i + 2, GPIO_FUNC(0x4));
+			s5p_gpio_cfg_pin(&gpio4->e0, i + 4, GPIO_FUNC(0x4));
+		}
+		break;
+	}
+	if (peripheral != PERIPH_ID_SPI4) {
+		for (i = pin; i < pin + 4; i++)
+			s5p_gpio_cfg_pin(bank, i, cfg);
+	}
+}
+
 static int exynos5_pinmux_config(int peripheral, int flags)
 {
 	switch (peripheral) {
@@ -314,6 +509,48 @@  static int exynos5_pinmux_config(int peripheral, int flags)
 	return 0;
 }
 
+static int exynos5420_pinmux_config(int peripheral, int flags)
+{
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		exynos5420_uart_config(peripheral);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC1:
+	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC3:
+		return exynos5420_mmc_config(peripheral, flags);
+	case PERIPH_ID_SPI0:
+	case PERIPH_ID_SPI1:
+	case PERIPH_ID_SPI2:
+	case PERIPH_ID_SPI3:
+	case PERIPH_ID_SPI4:
+		exynos5420_spi_config(peripheral);
+		break;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+	case PERIPH_ID_I2C8:
+	case PERIPH_ID_I2C9:
+	case PERIPH_ID_I2C10:
+		exynos5420_i2c_config(peripheral);
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	return 0;
+}
+
 static void exynos4_i2c_config(int peripheral, int flags)
 {
 	struct exynos4_gpio_part1 *gpio1 =
@@ -463,11 +700,13 @@  static int exynos4_pinmux_config(int peripheral, int flags)
 
 int exynos_pinmux_config(int peripheral, int flags)
 {
-	if (cpu_is_exynos5())
+	if (proid_is_exynos5420()) {
+		return exynos5420_pinmux_config(peripheral, flags);
+	} else if (proid_is_exynos5250()) {
 		return exynos5_pinmux_config(peripheral, flags);
-	else if (cpu_is_exynos4())
+	} else if (cpu_is_exynos4()) {
 		return exynos4_pinmux_config(peripheral, flags);
-	else {
+	} else {
 		debug("pinmux functionality not supported\n");
 		return -1;
 	}
diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index a1a7439..2a19852 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -127,6 +127,58 @@  struct exynos4x12_gpio_part4 {
 	struct s5p_gpio_bank v4;
 };
 
+struct exynos5420_gpio_part1 {
+	struct s5p_gpio_bank a0;
+	struct s5p_gpio_bank a1;
+	struct s5p_gpio_bank a2;
+	struct s5p_gpio_bank b0;
+	struct s5p_gpio_bank b1;
+	struct s5p_gpio_bank b2;
+	struct s5p_gpio_bank b3;
+	struct s5p_gpio_bank b4;
+	struct s5p_gpio_bank h0;
+};
+
+struct exynos5420_gpio_part2 {
+	struct s5p_gpio_bank y7; /* 0x1340_0000 */
+	struct s5p_gpio_bank res[0x5f]; /*  */
+	struct s5p_gpio_bank x0; /* 0x1340_0C00 */
+	struct s5p_gpio_bank x1; /* 0x1340_0C20 */
+	struct s5p_gpio_bank x2; /* 0x1340_0C40 */
+	struct s5p_gpio_bank x3; /* 0x1340_0C60 */
+};
+
+struct exynos5420_gpio_part3 {
+	struct s5p_gpio_bank c0;
+	struct s5p_gpio_bank c1;
+	struct s5p_gpio_bank c2;
+	struct s5p_gpio_bank c3;
+	struct s5p_gpio_bank c4;
+	struct s5p_gpio_bank d1;
+	struct s5p_gpio_bank y0;
+	struct s5p_gpio_bank y1;
+	struct s5p_gpio_bank y2;
+	struct s5p_gpio_bank y3;
+	struct s5p_gpio_bank y4;
+	struct s5p_gpio_bank y5;
+	struct s5p_gpio_bank y6;
+};
+
+struct exynos5420_gpio_part4 {
+	struct s5p_gpio_bank e0; /* 0x1400_0000 */
+	struct s5p_gpio_bank e1; /* 0x1400_0020 */
+	struct s5p_gpio_bank f0; /* 0x1400_0040 */
+	struct s5p_gpio_bank f1; /* 0x1400_0060 */
+	struct s5p_gpio_bank g0; /* 0x1400_0080 */
+	struct s5p_gpio_bank g1; /* 0x1400_00A0 */
+	struct s5p_gpio_bank g2; /* 0x1400_00C0 */
+	struct s5p_gpio_bank j4; /* 0x1400_00E0 */
+};
+
+struct exynos5420_gpio_part5 {
+	struct s5p_gpio_bank z0; /* 0x0386_0000 */
+};
+
 struct exynos5_gpio_part1 {
 	struct s5p_gpio_bank a0;
 	struct s5p_gpio_bank a1;
@@ -259,16 +311,67 @@  void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
 	    - EXYNOS5_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
 	  * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART2_MAX)
 
+
+/* EXYNOS5420 */
+#define exynos5420_gpio_part1_get_nr(bank, pin) \
+	((((((unsigned int) &(((struct exynos5420_gpio_part1 *)\
+			       EXYNOS5420_GPIO_PART1_BASE)->bank)) \
+	    - EXYNOS5420_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
+	  * GPIO_PER_BANK) + pin)
+
+#define EXYNOS5420_GPIO_PART1_MAX ((sizeof(struct exynos5420_gpio_part1) \
+			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
+
+#define exynos5420_gpio_part2_get_nr(bank, pin) \
+	(((((((unsigned int) &(((struct exynos5420_gpio_part2 *)\
+				EXYNOS5420_GPIO_PART2_BASE)->bank)) \
+	    - EXYNOS5420_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
+	  * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART1_MAX)
+
+#define EXYNOS5420_GPIO_PART2_MAX ((sizeof(struct exynos5420_gpio_part2) \
+			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
+
+#define exynos5420_gpio_part3_get_nr(bank, pin) \
+	(((((((unsigned int) &(((struct exynos5420_gpio_part3 *)\
+				EXYNOS5420_GPIO_PART3_BASE)->bank)) \
+	    - EXYNOS5420_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
+	  * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART2_MAX)
+
+#define EXYNOS5420_GPIO_PART3_MAX ((sizeof(struct exynos5420_gpio_part3) \
+			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
+
+#define exynos5420_gpio_part4_get_nr(bank, pin) \
+	(((((((unsigned int) &(((struct exynos5420_gpio_part4 *)\
+				EXYNOS5420_GPIO_PART4_BASE)->bank)) \
+	    - EXYNOS5420_GPIO_PART4_BASE) / sizeof(struct s5p_gpio_bank)) \
+	  * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART3_MAX)
+
+#define EXYNOS5420_GPIO_PART4_MAX ((sizeof(struct exynos5420_gpio_part4) \
+			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
+
+#define EXYNOS5420_GPIO_PART5_MAX ((sizeof(struct exynos5420_gpio_part5) \
+			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
+
 static inline unsigned int s5p_gpio_base(int nr)
 {
 	if (cpu_is_exynos5()) {
-		if (nr < EXYNOS5_GPIO_PART1_MAX)
-			return EXYNOS5_GPIO_PART1_BASE;
-		else if (nr < EXYNOS5_GPIO_PART2_MAX)
-			return EXYNOS5_GPIO_PART2_BASE;
-		else
-			return EXYNOS5_GPIO_PART3_BASE;
-
+		if (proid_is_exynos5420()) {
+			if (nr < EXYNOS5420_GPIO_PART1_MAX)
+				return EXYNOS5420_GPIO_PART1_BASE;
+			else if (nr < EXYNOS5420_GPIO_PART2_MAX)
+				return EXYNOS5420_GPIO_PART2_BASE;
+			else if (nr < EXYNOS5420_GPIO_PART3_MAX)
+				return EXYNOS5420_GPIO_PART3_BASE;
+			else
+				return EXYNOS5420_GPIO_PART4_BASE;
+		} else {
+			if (nr < EXYNOS5_GPIO_PART1_MAX)
+				return EXYNOS5_GPIO_PART1_BASE;
+			else if (nr < EXYNOS5_GPIO_PART2_MAX)
+				return EXYNOS5_GPIO_PART2_BASE;
+			else
+				return EXYNOS5_GPIO_PART3_BASE;
+		}
 	} else if (cpu_is_exynos4()) {
 		if (nr < EXYNOS4_GPIO_PART1_MAX)
 			return EXYNOS4_GPIO_PART1_BASE;
@@ -282,13 +385,25 @@  static inline unsigned int s5p_gpio_base(int nr)
 static inline unsigned int s5p_gpio_part_max(int nr)
 {
 	if (cpu_is_exynos5()) {
-		if (nr < EXYNOS5_GPIO_PART1_MAX)
-			return 0;
-		else if (nr < EXYNOS5_GPIO_PART2_MAX)
-			return EXYNOS5_GPIO_PART1_MAX;
-		else
-			return EXYNOS5_GPIO_PART2_MAX;
-
+		if (proid_is_exynos5420()) {
+			if (nr < EXYNOS5420_GPIO_PART1_MAX)
+				return 0;
+			else if (nr < EXYNOS5420_GPIO_PART2_MAX)
+				return EXYNOS5420_GPIO_PART1_MAX;
+			else if (nr < EXYNOS5420_GPIO_PART3_MAX)
+				return EXYNOS5420_GPIO_PART2_MAX;
+			else if (nr < EXYNOS5420_GPIO_PART4_MAX)
+				return EXYNOS5420_GPIO_PART3_MAX;
+			else
+				return EXYNOS5420_GPIO_PART4_MAX;
+		} else {
+			if (nr < EXYNOS5_GPIO_PART1_MAX)
+				return 0;
+			else if (nr < EXYNOS5_GPIO_PART2_MAX)
+				return EXYNOS5_GPIO_PART1_MAX;
+			else
+				return EXYNOS5_GPIO_PART2_MAX;
+		}
 	} else if (cpu_is_exynos4()) {
 		if (proid_is_exynos4412()) {
 			if (nr < EXYNOS4X12_GPIO_PART1_MAX)
diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h
index 9952155..15988ac 100644
--- a/arch/arm/include/asm/arch-exynos/periph.h
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -34,6 +34,9 @@  enum periph_id {
 	PERIPH_ID_SDMMC1,
 	PERIPH_ID_SDMMC2,
 	PERIPH_ID_SDMMC3,
+	PERIPH_ID_I2C8 = 87,
+	PERIPH_ID_I2C9,
+	PERIPH_ID_I2C10 = 203,
 	PERIPH_ID_I2S1 = 99,
 
 	/* Since following peripherals do