diff mbox series

[v20,06/17] dt: bindings: lp55xx: Be consistent in the document with LED acronym

Message ID 20200423155524.13971-7-dmurphy@ti.com
State Superseded
Headers show
Series Multicolor Framework (array edition) | expand

Commit Message

Dan Murphy April 23, 2020, 3:55 p.m. UTC 
Update the document to be consistent in case when using "LED".
This acronym should be capital throughout the document.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
index 1b66a413fb9d..bfe2805c5534 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
@@ -1,4 +1,4 @@ 
-Binding for TI/National Semiconductor LP55xx Led Drivers
+Binding for TI/National Semiconductor LP55xx LED Drivers
 
 Required properties:
 - compatible: one of
@@ -12,8 +12,8 @@  Required properties:
 - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
 
 Each child has own specific current settings
-- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
-- max-cur: Maximun current at each led channel.
+- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
+- max-cur: Maximun current at each LED channel.
 
 Optional properties:
 - enable-gpio: GPIO attached to the chip's enable pin