[Linaro-mm-sig,2/2] Revert "drivers: of: add initialization code for dma reserved memory"

diff --git a/Documentation/devicetree/bindings/memory.txt b/Documentation/devicetree/bindings/memory.txt
deleted file mode 100644
index eb24693..0000000
--- a/Documentation/devicetree/bindings/memory.txt
+++ /dev/null
@@ -1,168 +0,0 @@ 
-*** Memory binding ***
-
-The /memory node provides basic information about the address and size
-of the physical memory. This node is usually filled or updated by the
-bootloader, depending on the actual memory configuration of the given
-hardware.
-
-The memory layout is described by the following node:
-
-/ {
-	#address-cells = <(n)>;
-	#size-cells = <(m)>;
-	memory {
-		device_type = "memory";
-		reg =  <(baseaddr1) (size1)
-			(baseaddr2) (size2)
-			...
-			(baseaddrN) (sizeN)>;
-	};
-	...
-};
-
-A memory node follows the typical device tree rules for "reg" property:
-n:		number of cells used to store base address value
-m:		number of cells used to store size value
-baseaddrX:	defines a base address of the defined memory bank
-sizeX:		the size of the defined memory bank
-
-
-More than one memory bank can be defined.
-
-
-*** Reserved memory regions ***
-
-In /memory/reserved-memory node one can create child nodes describing
-particular reserved (excluded from normal use) memory regions. Such
-memory regions are usually designed for the special usage by various
-device drivers. A good example are contiguous memory allocations or
-memory sharing with other operating system on the same hardware board.
-Those special memory regions might depend on the board configuration and
-devices used on the target system.
-
-Parameters for each memory region can be encoded into the device tree
-with the following convention:
-
-[(label):] (name) {
-	compatible = "linux,contiguous-memory-region", "reserved-memory-region";
-	reg = <(address) (size)>;
-	(linux,default-contiguous-region);
-};
-
-compatible:	one or more of:
-	- "linux,contiguous-memory-region" - enables binding of this
-	  region to Contiguous Memory Allocator (special region for
-	  contiguous memory allocations, shared with movable system
-	  memory, Linux kernel-specific).
-	- "reserved-memory-region" - compatibility is defined, given
-	  region is assigned for exclusive usage for by the respective
-	  devices.
-
-reg:	standard property defining the base address and size of
-	the memory region
-
-linux,default-contiguous-region: property indicating that the region
-	is the default region for all contiguous memory
-	allocations, Linux specific (optional)
-
-It is optional to specify the base address, so if one wants to use
-autoconfiguration of the base address, '0' can be specified as a base
-address in the 'reg' property.
-
-The /memory/reserved-memory node must contain the same #address-cells
-and #size-cells value as the root node.
-
-
-*** Device node's properties ***
-
-Once regions in the /memory/reserved-memory node have been defined, they
-may be referenced by other device nodes. Bindings that wish to reference
-memory regions should explicitly document their use of the following
-property:
-
-memory-region = <&phandle_to_defined_region>;
-
-This property indicates that the device driver should use the memory
-region pointed by the given phandle.
-
-
-*** Example ***
-
-This example defines a memory consisting of 4 memory banks. 3 contiguous
-regions are defined for Linux kernel, one default of all device drivers
-(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the
-framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB)
-and one for multimedia processing (labelled multimedia_mem, placed at
-0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000
-device for DMA memory allocations (Linux kernel drivers will use CMA is
-available or dma-exclusive usage otherwise). 'multimedia_mem' is
-assigned to scaler@12500000 and codec@12600000 devices for contiguous
-memory allocations when CMA driver is enabled.
-
-The reason for creating a separate region for framebuffer device is to
-match the framebuffer base address to the one configured by bootloader,
-so once Linux kernel drivers starts no glitches on the displayed boot
-logo appears. Scaller and codec drivers should share the memory
-allocations.
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/* ... */
-
-	memory {
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
-
-		reserved-memory {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/*
-			 * global autoconfigured region for contiguous allocations
-			 * (used only with Contiguous Memory Allocator)
-			 */
-			contig_region@0 {
-				compatible = "linux,contiguous-memory-region";
-				reg = <0x0 0x4000000>;
-				linux,default-contiguous-region;
-			};
-
-			/*
-			 * special region for framebuffer
-			 */
-			display_region: region@78000000 {
-				compatible = "linux,contiguous-memory-region", "reserved-memory-region";
-				reg = <0x78000000 0x800000>;
-			};
-
-			/*
-			 * special region for multimedia processing devices
-			 */
-			multimedia_region: region@77000000 {
-				compatible = "linux,contiguous-memory-region";
-				reg = <0x77000000 0x4000000>;
-			};
-		};
-	};
-
-	/* ... */
-
-	fb0: fb@12300000 {
-		status = "okay";
-		memory-region = <&display_region>;
-	};
-
-	scaler: scaler@12500000 {
-		status = "okay";
-		memory-region = <&multimedia_region>;
-	};
-
-	codec: codec@12600000 {
-		status = "okay";
-		memory-region = <&multimedia_region>;
-	};
-};
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 9d2009a..78cc760 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -74,10 +74,4 @@  config OF_MTD
 	depends on MTD
 	def_bool y
 
-config OF_RESERVED_MEM
-	depends on OF_FLATTREE && (DMA_CMA || (HAVE_GENERIC_DMA_COHERENT && HAVE_MEMBLOCK))
-	def_bool y
-	help
-	  Initialization code for DMA reserved memory
-
 endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index ed9660a..efd0510 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -9,4 +9,3 @@  obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
 obj-$(CONFIG_OF_PCI)	+= of_pci.o
 obj-$(CONFIG_OF_PCI_IRQ)  += of_pci_irq.o
 obj-$(CONFIG_OF_MTD)	+= of_mtd.o
-obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
deleted file mode 100644
index 0fe40c7..0000000
--- a/drivers/of/of_reserved_mem.c
+++ /dev/null
@@ -1,173 +0,0 @@ 
-/*
- * Device tree based initialization code for reserved memory.
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Author: Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License or (at your optional) any later version of the license.
- */
-
-#include <linux/memblock.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
-#include <linux/mm.h>
-#include <linux/sizes.h>
-#include <linux/mm_types.h>
-#include <linux/dma-contiguous.h>
-#include <linux/dma-mapping.h>
-#include <linux/of_reserved_mem.h>
-
-#define MAX_RESERVED_REGIONS	16
-struct reserved_mem {
-	phys_addr_t		base;
-	unsigned long		size;
-	struct cma		*cma;
-	char			name[32];
-};
-static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
-static int reserved_mem_count;
-
-static int __init fdt_scan_reserved_mem(unsigned long node, const char *uname,
-					int depth, void *data)
-{
-	struct reserved_mem *rmem = &reserved_mem[reserved_mem_count];
-	phys_addr_t base, size;
-	int is_cma, is_reserved;
-	unsigned long len;
-	const char *status;
-	__be32 *prop;
-
-	is_cma = IS_ENABLED(CONFIG_DMA_CMA) &&
-	       of_flat_dt_is_compatible(node, "linux,contiguous-memory-region");
-	is_reserved = of_flat_dt_is_compatible(node, "reserved-memory-region");
-
-	if (!is_reserved && !is_cma) {
-		/* ignore node and scan next one */
-		return 0;
-	}
-
-	status = of_get_flat_dt_prop(node, "status", &len);
-	if (status && strcmp(status, "okay") != 0) {
-		/* ignore disabled node nad scan next one */
-		return 0;
-	}
-
-	prop = of_get_flat_dt_prop(node, "reg", &len);
-	if (!prop || (len < (dt_root_size_cells + dt_root_addr_cells) *
-			     sizeof(__be32))) {
-		pr_err("Reserved mem: node %s, incorrect \"reg\" property\n",
-		       uname);
-		/* ignore node and scan next one */
-		return 0;
-	}
-	base = dt_mem_next_cell(dt_root_addr_cells, &prop);
-	size = dt_mem_next_cell(dt_root_size_cells, &prop);
-
-	if (!size) {
-		/* ignore node and scan next one */
-		return 0;
-	}
-
-	pr_info("Reserved mem: found %s, memory base %lx, size %ld MiB\n",
-		uname, (unsigned long)base, (unsigned long)size / SZ_1M);
-
-	if (reserved_mem_count == ARRAY_SIZE(reserved_mem))
-		return -ENOSPC;
-
-	rmem->base = base;
-	rmem->size = size;
-	strlcpy(rmem->name, uname, sizeof(rmem->name));
-
-	if (is_cma) {
-		struct cma *cma;
-		if (dma_contiguous_reserve_area(size, base, 0, &cma) == 0) {
-			rmem->cma = cma;
-			reserved_mem_count++;
-			if (of_get_flat_dt_prop(node,
-						"linux,default-contiguous-region",
-						NULL))
-				dma_contiguous_set_default(cma);
-		}
-	} else if (is_reserved) {
-		if (memblock_remove(base, size) == 0)
-			reserved_mem_count++;
-		else
-			pr_err("Failed to reserve memory for %s\n", uname);
-	}
-
-	return 0;
-}
-
-static struct reserved_mem *get_dma_memory_region(struct device *dev)
-{
-	struct device_node *node;
-	const char *name;
-	int i;
-
-	node = of_parse_phandle(dev->of_node, "memory-region", 0);
-	if (!node)
-		return NULL;
-
-	name = kbasename(node->full_name);
-	for (i = 0; i < reserved_mem_count; i++)
-		if (strcmp(name, reserved_mem[i].name) == 0)
-			return &reserved_mem[i];
-	return NULL;
-}
-
-/**
- * of_reserved_mem_device_init() - assign reserved memory region to given device
- *
- * This function assign memory region pointed by "memory-region" device tree
- * property to the given device.
- */
-void of_reserved_mem_device_init(struct device *dev)
-{
-	struct reserved_mem *region = get_dma_memory_region(dev);
-	if (!region)
-		return;
-
-	if (region->cma) {
-		dev_set_cma_area(dev, region->cma);
-		pr_info("Assigned CMA %s to %s device\n", region->name,
-			dev_name(dev));
-	} else {
-		if (dma_declare_coherent_memory(dev, region->base, region->base,
-		    region->size, DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) != 0)
-			pr_info("Declared reserved memory %s to %s device\n",
-				region->name, dev_name(dev));
-	}
-}
-
-/**
- * of_reserved_mem_device_release() - release reserved memory device structures
- *
- * This function releases structures allocated for memory region handling for
- * the given device.
- */
-void of_reserved_mem_device_release(struct device *dev)
-{
-	struct reserved_mem *region = get_dma_memory_region(dev);
-	if (!region && !region->cma)
-		dma_release_declared_memory(dev);
-}
-
-/**
- * early_init_dt_scan_reserved_mem() - create reserved memory regions
- *
- * This function grabs memory from early allocator for device exclusive use
- * defined in device tree structures. It should be called by arch specific code
- * once the early allocator (memblock) has been activated and all other
- * subsystems have already allocated/reserved memory.
- */
-void __init early_init_dt_scan_reserved_mem(void)
-{
-	of_scan_flat_dt_by_path("/memory/reserved-memory",
-				fdt_scan_reserved_mem, NULL);
-}
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 9b439ac..f6dcde2 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -21,7 +21,6 @@ 
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 
 const struct of_device_id of_default_bus_match_table[] = {
@@ -219,8 +218,6 @@  static struct platform_device *of_platform_device_create_pdata(
 	dev->dev.bus = &platform_bus_type;
 	dev->dev.platform_data = platform_data;
 
-	of_reserved_mem_device_init(&dev->dev);
-
 	/* We do not fill the DMA ops for platform devices by default.
 	 * This is currently the responsibility of the platform code
 	 * to do such, possibly using a device notifier
@@ -228,7 +225,6 @@  static struct platform_device *of_platform_device_create_pdata(
 
 	if (of_device_add(dev) != 0) {
 		platform_device_put(dev);
-		of_reserved_mem_device_release(&dev->dev);
 		return NULL;
 	}
 
diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h
deleted file mode 100644
index c841282..0000000
--- a/include/linux/of_reserved_mem.h
+++ /dev/null
@@ -1,14 +0,0 @@ 
-#ifndef __OF_RESERVED_MEM_H
-#define __OF_RESERVED_MEM_H
-
-#ifdef CONFIG_OF_RESERVED_MEM
-void of_reserved_mem_device_init(struct device *dev);
-void of_reserved_mem_device_release(struct device *dev);
-void early_init_dt_scan_reserved_mem(void);
-#else
-static inline void of_reserved_mem_device_init(struct device *dev) { }
-static inline void of_reserved_mem_device_release(struct device *dev) { }
-static inline void early_init_dt_scan_reserved_mem(void) { }
-#endif
-
-#endif /* __OF_RESERVED_MEM_H */