@@ -363,6 +363,19 @@ v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4
--output=/tmp/frames.3A --fmt=type:META_CAPTURE,?
--reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5
+You can also use yavta [#f2]_ command to do same thing as above:
+
+.. code-block:: none
+
+ yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
+ --file=frame-#.out-f NV12 /dev/video5 & \
+ yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
+ --file=frame-#.vf -f NV12 /dev/video6 & \
+ yavta --data-prefix -Bmeta-capture -c10 -n5 -I \
+ --file=frame-#.3a /dev/video7 & \
+ yavta --data-prefix -Boutput-mplane -c10 -n5 -I -s2592x1944 \
+ --file=/tmp/frame-in.cio2 -f IPU3_SGRBG10 /dev/video4
+
where /dev/video4, /dev/video5, /dev/video6 and /dev/video7 devices point to
input, output, viewfinder and 3A statistics video nodes respectively.
@@ -8,8 +8,6 @@ staging directory.
- IPU3 driver documentation (Laurent)
Comments on configuring v4l2 subdevs for CIO2 and ImgU.
-- Switch to yavta from v4l2n in driver docs.
-
- Elaborate the functionality of different selection rectangles in driver
documentation. This may require driver changes as well.
This patch add yavta test command in ipu3.rst as an example on how to run simple ImgU test using yavta. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> --- Documentation/media/v4l-drivers/ipu3.rst | 13 +++++++++++++ drivers/staging/media/ipu3/TODO | 2 -- 2 files changed, 13 insertions(+), 2 deletions(-)