@@ -23,6 +23,7 @@
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/mmc/host.h>
#include <linux/mmc/pm.h>
@@ -75,6 +76,14 @@ struct sdhci_acpi_host {
unsigned long private[0] ____cacheline_aligned;
};
+enum {
+ SDHCI_ACPI_QUIRK_SD_NO_1_8V = BIT(0),
+};
+
+static int quirks = -1;
+module_param(quirks, int, 0444);
+MODULE_PARM_DESC(quirks, "Override sdhci-acpi specific quirks");
+
static inline void *sdhci_acpi_priv(struct sdhci_acpi_host *c)
{
return (void *)c->private;
@@ -647,6 +656,24 @@ static const struct acpi_device_id sdhci_acpi_ids[] = {
};
MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
+static const struct dmi_system_id sdhci_acpi_quirks[] = {
+ {
+ /*
+ * The Lenovo Miix 320-10ICR has a bug in the _PS0 method of
+ * the SHC1 ACPI device, this bug causes it to reprogram the
+ * wrong LDO (DLDO3) to 1.8V if 1.8V modes are used and the
+ * card is (runtime) suspended + resumed. DLDO3 is used for
+ * the LCD and setting it to 1.8V causes the LCD to go black.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"),
+ },
+ .driver_data = (void *)SDHCI_ACPI_QUIRK_SD_NO_1_8V,
+ },
+ {} /* Terminating entry */
+};
+
static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(struct acpi_device *adev)
{
const struct sdhci_acpi_uid_slot *u;
@@ -663,6 +690,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
const struct sdhci_acpi_slot *slot;
struct acpi_device *device, *child;
+ const struct dmi_system_id *id;
struct sdhci_acpi_host *c;
struct sdhci_host *host;
struct resource *iomem;
@@ -670,6 +698,14 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
size_t priv_size;
int err;
+ if (quirks == -1) {
+ id = dmi_first_match(sdhci_acpi_quirks);
+ if (id)
+ quirks = (long)id->driver_data;
+ else
+ quirks = 0;
+ }
+
device = ACPI_COMPANION(dev);
if (!device)
return -ENODEV;
@@ -759,6 +795,9 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
dev_warn(dev, "failed to setup card detect gpio\n");
c->use_runtime_pm = false;
}
+
+ if (quirks & SDHCI_ACPI_QUIRK_SD_NO_1_8V)
+ host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
}
err = sdhci_setup_host(host);
Based on a sample of 7 DSDTs from Cherry Trail devices using an AXP288 PMIC depending on the design one of 2 possible LDOs on the PMIC is used for the MMC signalling voltage, either DLDO3 or GPIO1LDO (GPIO1 pin in low noise LDO mode). The Lenovo Miix 320-10ICR uses GPIO1LDO in the SHC1 ACPI device's DSM methods to set 3.3 or 1.8 signalling voltage and this appears to work as advertised, so presumably the device is actually using GPIO1LDO for the external microSD signalling voltage. But this device has a bug in the _PS0 method of the SHC1 ACPI device, the DSM remembers the last set signalling voltage and the _PS0 restores this after a (runtime) suspend-resume cycle, but it "restores" the voltage on DLDO3 instead of setting it on GPIO1LDO as the DSM method does. DLDO3 is used for the LCD and setting it to 1.8V causes the LCD to go black. This issue can be worked around by setting the SDHCI_QUIRK2_NO_1_8_V quirk on the sdhci_host so that the DSM never gets used to program the signalling voltage to 1.8V. So far we have mostly been able to avoid using device specific quirks in the sdhci-acpi code, but given that this issue is specific to this one model and we certainly do not want to disable 1.8V modes everywhere I see no other option. This commit adds a new mechanism for setting sdhci-acpi specific quirks and a matching sdhci-acpi.quirks module parameter to make testing quirks / similar issues on other devices easier. The first quirk supported by this mechanism is SDHCI_ACPI_QUIRK_SD_NO_1_8V, which when set causes any slots with the SDHCI_ACPI_SD_CD flag to get the SDHCI_QUIRK2_NO_1_8_V quirk set on their sdhci_host. This commit also adds a DMI table for specifying default quirks for some models and adds an entry for the Lenovo Miix 320-10ICR which enables the SDHCI_QUIRK2_NO_1_8_V by default on this model, fixing the LCD going black when the external microSD slot is used. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=111294 BugLink: https://gitlab.freedesktop.org/drm/intel/issues/355 Reported-by: russianneuromancer <russianneuromancer@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/mmc/host/sdhci-acpi.c | 39 +++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)