@@ -7,6 +7,7 @@
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
#include <linux/pm_runtime.h>
#include <linux/qcom-geni-se.h>
#include <linux/spi/spi.h>
@@ -86,6 +87,7 @@ struct spi_geni_master {
spinlock_t lock;
enum spi_m_cmd_opcode cur_mcmd;
int irq;
+ bool opp_table;
};
static int get_spi_clk_cfg(unsigned int speed_hz,
@@ -95,7 +97,6 @@ static int get_spi_clk_cfg(unsigned int speed_hz,
{
unsigned long sclk_freq;
unsigned int actual_hz;
- struct geni_se *se = &mas->se;
int ret;
ret = geni_se_clk_freq_match(&mas->se,
@@ -112,9 +113,9 @@ static int get_spi_clk_cfg(unsigned int speed_hz,
dev_dbg(mas->dev, "req %u=>%u sclk %lu, idx %d, div %d\n", speed_hz,
actual_hz, sclk_freq, *clk_idx, *clk_div);
- ret = clk_set_rate(se->clk, sclk_freq);
+ ret = dev_pm_opp_set_rate(mas->dev, sclk_freq);
if (ret)
- dev_err(mas->dev, "clk_set_rate failed %d\n", ret);
+ dev_err(mas->dev, "dev_pm_opp_set_rate failed %d\n", ret);
return ret;
}
@@ -561,6 +562,12 @@ static int spi_geni_probe(struct platform_device *pdev)
mas->se.wrapper = dev_get_drvdata(dev->parent);
mas->se.base = base;
mas->se.clk = clk;
+ mas->se.opp = dev_pm_opp_set_clkname(&pdev->dev, "se");
+ if (IS_ERR(mas->se.opp))
+ return PTR_ERR(mas->se.opp);
+ /* OPP table is optional */
+ if (!dev_pm_opp_of_add_table(&pdev->dev))
+ mas->opp_table = true;
spi->bus_num = -1;
spi->dev.of_node = dev->of_node;
@@ -596,6 +603,9 @@ static int spi_geni_probe(struct platform_device *pdev)
spi_geni_probe_runtime_disable:
pm_runtime_disable(dev);
spi_master_put(spi);
+ if (mas->opp_table)
+ dev_pm_opp_of_remove_table(&pdev->dev);
+ dev_pm_opp_put_clkname(mas->se.opp);
return ret;
}
@@ -604,6 +614,9 @@ static int spi_geni_remove(struct platform_device *pdev)
struct spi_master *spi = platform_get_drvdata(pdev);
struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ if (mas->opp_table)
+ dev_pm_opp_of_remove_table(&pdev->dev);
+ dev_pm_opp_put_clkname(mas->se.opp);
/* Unregister _before_ disabling pm_runtime() so we stop transfers */
spi_unregister_master(spi);
@@ -617,6 +630,9 @@ static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
struct spi_master *spi = dev_get_drvdata(dev);
struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ /* Drop the performance state vote */
+ dev_pm_opp_set_rate(dev, 0);
+
return geni_se_resources_off(&mas->se);
}
geni spi needs to express a perforamnce state requirement on CX depending on the frequency of the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Cc: Mark Brown <broonie@kernel.org> Cc: Alok Chauhan <alokc@codeaurora.org> Cc: Akash Asthana <akashast@codeaurora.org> Cc: linux-spi@vger.kernel.org --- drivers/spi/spi-geni-qcom.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)