dt-bindings: spi: Convert UniPhier SPI controller to json-schema

diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
new file mode 100644
index 0000000..bab8bcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
@@ -0,0 +1,55 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/socionext,uniphier-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SPI controller
+
+description: |
+  UniPhier SoCs have SCSSI which supports SPI single channel.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+  - Keiji Hayashibara <hayashibara.keiji@socionext.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  "#address-cells": true
+  "#size-cells": true
+
+  compatible:
+    const: socionext,uniphier-scssi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+examples:
+  - |
+    spi0: spi@54006000 {
+        compatible = "socionext,uniphier-scssi";
+        reg = <0x54006000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 39 4>;
+        clocks = <&peri_clk 11>;
+        resets = <&peri_rst 11>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
deleted file mode 100644
index e120157..0000000
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ /dev/null
@@ -1,28 +0,0 @@ 
-Socionext UniPhier SPI controller driver
-
-UniPhier SoCs have SCSSI which supports SPI single channel.
-
-Required properties:
- - compatible: should be "socionext,uniphier-scssi"
- - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - interrupts: a single interrupt specifier
- - pinctrl-names: should be "default"
- - pinctrl-0: pin control state for the default mode
- - clocks: a phandle to the clock for the device
- - resets: a phandle to the reset control for the device
-
-Example:
-
-spi0: spi@54006000 {
-	compatible = "socionext,uniphier-scssi";
-	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <0 39 4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi0>;
-	clocks = <&peri_clk 11>;
-	resets = <&peri_rst 11>;
-};