@@ -11,6 +11,7 @@
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
+#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/mfd/da9062/registers.h>
@@ -149,12 +150,13 @@ static int da9062_wdt_restart(struct watchdog_device *wdd, unsigned long action,
void *data)
{
struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
+ struct i2c_client *client = to_i2c_client(wdt->hw->dev);
int ret;
- ret = regmap_write(wdt->hw->regmap,
- DA9062AA_CONTROL_F,
- DA9062AA_SHUTDOWN_MASK);
- if (ret)
+ /* Don't use regmap because it is not atomic safe */
+ ret = i2c_smbus_write_byte_data(client, DA9062AA_CONTROL_F,
+ DA9062AA_SHUTDOWN_MASK);
+ if (ret < 0)
dev_alert(wdt->hw->dev, "Failed to shutdown (err = %d)\n",
ret);
The restart handler is executed during the shutdown phase which is atomic/irq-less. The i2c framework supports atomic transfers since commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") to address this use case. Using regmap within an atomic context is allowed only if the regmap type is MMIO and the cache type 'flat' or no cache is used. Using the i2c_smbus_write_byte_data() function can be done without additional tests because: 1) the DA9062 is an i2c-only device and 2) the i2c framework emulates the smbus protocol if the host adapter does not support smbus_xfer by using the master_xfer. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- Hi, This patch is based on Stefan Lengfeld's RFC Patch [1]. [1] https://patchwork.ozlabs.org/patch/1085942/ Changes: v2: - adapt commit message - add comment - make use of i2c_smbus_write_byte_data() --- drivers/watchdog/da9062_wdt.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)