diff mbox series

[net-next,5/5] net: hns3: disable auto-negotiation off with 1000M setting in ethtool

Message ID 1589016461-10130-6-git-send-email-tanhuazhong@huawei.com
State New
Headers show
Series None | expand

Commit Message

Huazhong Tan May 9, 2020, 9:27 a.m. UTC 
From: Yufeng Mo <moyufeng@huawei.com>

The 802.3 specification does not specify the behavior of
auto-negotiation off with 1000M in PHY. Therefore, some PHY
compatibility issues occur. This patch forbids the setting of
this unreasonable mode by ethtool in driver.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 1a105f2..6b1545f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -773,8 +773,13 @@  static int hns3_set_link_ksettings(struct net_device *netdev,
 		  cmd->base.autoneg, cmd->base.speed, cmd->base.duplex);
 
 	/* Only support ksettings_set for netdev with phy attached for now */
-	if (netdev->phydev)
+	if (netdev->phydev) {
+		if (cmd->base.speed == SPEED_1000 &&
+		    cmd->base.autoneg == AUTONEG_DISABLE)
+			return -EINVAL;
+
 		return phy_ethtool_ksettings_set(netdev->phydev, cmd);
+	}
 
 	if (handle->pdev->revision == 0x20)
 		return -EOPNOTSUPP;