@@ -42,7 +42,16 @@ _start: b reset
ldr pc, _not_used
ldr pc, _irq
ldr pc, _fiq
-
+#ifdef CONFIG_PRELOADER
+_undefined_instruction: .word _undefined_instruction
+_software_interrupt: .word _software_interrupt
+_prefetch_abort: .word _prefetch_abort
+_data_abort: .word _data_abort
+_not_used: .word _not_used
+_irq: .word _irq
+_fiq: .word _fiq
+_pad: .word 0x12345678 /* now 16*4=64 */
+#else
_undefined_instruction: .word undefined_instruction
_software_interrupt: .word software_interrupt
_prefetch_abort: .word prefetch_abort
@@ -51,6 +60,8 @@ _not_used: .word not_used
_irq: .word irq
_fiq: .word fiq
_pad: .word 0x12345678 /* now 16*4=64 */
+#endif /* CONFIG_PRELOADER */
+
.global _end_vect
_end_vect:
@@ -171,10 +182,9 @@ stack_setup:
mov sp, r4
adr r0, _start
-#ifndef CONFIG_PRELOADER
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
-#endif
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _image_copy_end_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -224,6 +234,15 @@ fixnext:
add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
+ b clear_bss
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
+
+#endif /* #ifndef CONFIG_PRELOADER */
clear_bss:
ldr r0, _bss_start_ofs
@@ -237,7 +256,6 @@ clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
cmp r0, r1
bne clbss_l
-#endif /* #ifndef CONFIG_PRELOADER */
/*
* We are done. Do not return, instead branch to second part of board
@@ -257,13 +275,6 @@ jump_2_ram:
_board_init_r_ofs:
.word board_init_r - _start
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
/*************************************************************************
*
* CPU_init_critical registers
@@ -300,6 +311,8 @@ cpu_init_crit:
bl lowlevel_init @ go setup pll,mux,memory
mov lr, ip @ restore link
mov pc, lr @ back to my caller
+
+#ifndef CONFIG_PRELOADER
/*
*************************************************************************
*
@@ -488,3 +501,4 @@ fiq:
bl do_fiq
#endif
+#endif /* CONFIG_PRELOADER */
Changes for supporting SPL Signed-off-by: Aneesh V <aneesh@ti.com> --- arch/arm/cpu/armv7/start.S | 36 +++++++++++++++++++++++++----------- 1 files changed, 25 insertions(+), 11 deletions(-)