| Message ID | 20200708204456.1365855-2-linus.walleij@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Rectify RTL8366 default VLAN Behaviour | expand |
On 7/8/2020 1:44 PM, Linus Walleij wrote: > The RTL8366 would not handle adding new members (ports) to > a VLAN: the code assumed that ->port_vlan_add() was only > called once for a single port. When intializing the > switch with .configure_vlan_while_not_filtering set to > true, the function is called numerous times for adding > all ports to VLAN1, which was something the code could > not handle. > > Alter rtl8366_set_vlan() to just |= new members and > untagged flags to 4k and MC VLAN table entries alike. > This makes it possible to just add new ports to a > VLAN. > > Put in some helpful debug code that can be used to find > any further bugs here. > > Cc: DENG Qingfang <dqfext@gmail.com> > Cc: Mauri Sandberg <sandberg@mailfence.com> > Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -- Florian
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c index 993cf3ac59d9..2997abeecc4a 100644 --- a/drivers/net/dsa/rtl8366.c +++ b/drivers/net/dsa/rtl8366.c @@ -43,18 +43,26 @@ int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member, int ret; int i; + dev_dbg(smi->dev, + "setting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n", + vid, member, untag); + /* Update the 4K table */ ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); if (ret) return ret; - vlan4k.member = member; - vlan4k.untag = untag; + vlan4k.member |= member; + vlan4k.untag |= untag; vlan4k.fid = fid; ret = smi->ops->set_vlan_4k(smi, &vlan4k); if (ret) return ret; + dev_dbg(smi->dev, + "resulting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n", + vid, vlan4k.member, vlan4k.untag); + /* Try to find an existing MC entry for this VID */ for (i = 0; i < smi->num_vlan_mc; i++) { struct rtl8366_vlan_mc vlanmc; @@ -65,11 +73,16 @@ int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member, if (vid == vlanmc.vid) { /* update the MC entry */ - vlanmc.member = member; - vlanmc.untag = untag; + vlanmc.member |= member; + vlanmc.untag |= untag; vlanmc.fid = fid; ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + + dev_dbg(smi->dev, + "resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n", + vid, vlanmc.member, vlanmc.untag); + break; } }
The RTL8366 would not handle adding new members (ports) to a VLAN: the code assumed that ->port_vlan_add() was only called once for a single port. When intializing the switch with .configure_vlan_while_not_filtering set to true, the function is called numerous times for adding all ports to VLAN1, which was something the code could not handle. Alter rtl8366_set_vlan() to just |= new members and untagged flags to 4k and MC VLAN table entries alike. This makes it possible to just add new ports to a VLAN. Put in some helpful debug code that can be used to find any further bugs here. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/net/dsa/rtl8366.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) -- 2.26.2