@@ -1086,9 +1086,14 @@ static void mcde_display_update(struct drm_simple_display_pipe *pipe,
*/
if (fb) {
mcde_set_extsrc(mcde, drm_fb_cma_get_gem_addr(fb, pstate, 0));
- if (!mcde->video_mode)
- /* Send a single frame using software sync */
- mcde_display_send_one_frame(mcde);
+ if (!mcde->video_mode) {
+ /*
+ * Send a single frame using software sync if the flow
+ * is not active yet.
+ */
+ if (mcde->flow_active == 0)
+ mcde_display_send_one_frame(mcde);
+ }
dev_info_once(mcde->dev, "sent first display update\n");
} else {
/*
Whenener a display update was sent, apart from updating the memory base address we called mcde_display_send_one_frame() which also sent a command to the display requesting the TE IRQ and enabling the FIFO. When continous updates are running this is wrong: we need to only send this to start the flow to the display on the very first update. This lead to the display pipeline locking up and crashing. Check if the flow is already running and in that case do not call mcde_display_send_one_frame(). This fixes crashes on the Samsung GT-S7710 (Skomer). Cc: Stephan Gerhold <stephan@gerhold.net> Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/gpu/drm/mcde/mcde_display.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) -- 2.26.2 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel