@@ -39,34 +39,35 @@ static void left_shift_vector(u8 *in, u8 *out, int size)
/**
* Sign a block of data, putting the result into dst.
*
- * \param key Input AES key, length AES_KEY_LENGTH
+ * \param key Input AES key, length AES128_KEY_LENGTH
* \param key_schedule Expanded key to use
* \param src Source data of length 'num_aes_blocks' blocks
- * \param dst Destination buffer, length AES_KEY_LENGTH
+ * \param dst Destination buffer, length AES128_KEY_LENGTH
* \param num_aes_blocks Number of AES blocks to encrypt
*/
static void sign_object(u8 *key, u8 *key_schedule, u8 *src, u8 *dst,
u32 num_aes_blocks)
{
- u8 tmp_data[AES_KEY_LENGTH];
- u8 iv[AES_KEY_LENGTH] = {0};
- u8 left[AES_KEY_LENGTH];
- u8 k1[AES_KEY_LENGTH];
+ u8 tmp_data[AES128_KEY_LENGTH];
+ u8 iv[AES128_KEY_LENGTH] = {0};
+ u8 left[AES128_KEY_LENGTH];
+ u8 k1[AES128_KEY_LENGTH];
u8 *cbc_chain_data;
unsigned i;
cbc_chain_data = zero_key; /* Convenient array of 0's for IV */
/* compute K1 constant needed by AES-CMAC calculation */
- for (i = 0; i < AES_KEY_LENGTH; i++)
+ for (i = 0; i < AES128_KEY_LENGTH; i++)
tmp_data[i] = 0;
- aes_cbc_encrypt_blocks(key_schedule, iv, tmp_data, left, 1);
+ aes_cbc_encrypt_blocks(AES128_KEY_LENGTH, key_schedule, iv,
+ tmp_data, left, 1);
left_shift_vector(left, k1, sizeof(left));
if ((left[0] >> 7) != 0) /* get MSB of L */
- k1[AES_KEY_LENGTH-1] ^= AES_CMAC_CONST_RB;
+ k1[AES128_KEY_LENGTH - 1] ^= AES_CMAC_CONST_RB;
/* compute the AES-CMAC value */
for (i = 0; i < num_aes_blocks; i++) {
@@ -78,31 +79,32 @@ static void sign_object(u8 *key, u8 *key_schedule, u8 *src, u8 *dst,
aes_apply_cbc_chain_data(tmp_data, k1, tmp_data);
/* encrypt the AES block */
- aes_encrypt(tmp_data, key_schedule, dst);
+ aes_encrypt(AES128_KEY_LENGTH, tmp_data,
+ key_schedule, dst);
debug("sign_obj: block %d of %d\n", i, num_aes_blocks);
/* Update pointers for next loop. */
cbc_chain_data = dst;
- src += AES_KEY_LENGTH;
+ src += AES128_KEY_LENGTH;
}
}
/**
* Encrypt and sign a block of data (depending on security mode).
*
- * \param key Input AES key, length AES_KEY_LENGTH
+ * \param key Input AES key, length AES128_KEY_LENGTH
* \param oper Security operations mask to perform (enum security_op)
* \param src Source data
* \param length Size of source data
- * \param sig_dst Destination address for signature, AES_KEY_LENGTH bytes
+ * \param sig_dst Destination address for signature, AES128_KEY_LENGTH bytes
*/
static int encrypt_and_sign(u8 *key, enum security_op oper, u8 *src,
u32 length, u8 *sig_dst)
{
u32 num_aes_blocks;
- u8 key_schedule[AES_EXPAND_KEY_LENGTH];
- u8 iv[AES_KEY_LENGTH] = {0};
+ u8 key_schedule[AES128_EXPAND_KEY_LENGTH];
+ u8 iv[AES128_KEY_LENGTH] = {0};
debug("encrypt_and_sign: length = %d\n", length);
@@ -110,15 +112,16 @@ static int encrypt_and_sign(u8 *key, enum security_op oper, u8 *src,
* The only need for a key is for signing/checksum purposes, so
* if not encrypting, expand a key of 0s.
*/
- aes_expand_key(oper & SECURITY_ENCRYPT ? key : zero_key, key_schedule);
+ aes_expand_key(oper & SECURITY_ENCRYPT ? key : zero_key,
+ AES128_KEY_LENGTH, key_schedule);
- num_aes_blocks = (length + AES_KEY_LENGTH - 1) / AES_KEY_LENGTH;
+ num_aes_blocks = (length + AES128_KEY_LENGTH - 1) / AES128_KEY_LENGTH;
if (oper & SECURITY_ENCRYPT) {
/* Perform this in place, resulting in src being encrypted. */
debug("encrypt_and_sign: begin encryption\n");
- aes_cbc_encrypt_blocks(key_schedule, iv, src, src,
- num_aes_blocks);
+ aes_cbc_encrypt_blocks(AES128_KEY_LENGTH, key_schedule, iv, src,
+ src, num_aes_blocks);
debug("encrypt_and_sign: end encryption\n");
}
@@ -2,7 +2,7 @@
/*
* Copyright (C) 2014 Marek Vasut <marex at denx.de>
*
- * Command for en/de-crypting block of memory with AES-128-CBC cipher.
+ * Command for en/de-crypting block of memory with AES-[128/192/256]-CBC cipher.
*/
#include <common.h>
@@ -13,6 +13,18 @@
#include <linux/compiler.h>
#include <mapmem.h>
+u32 aes_get_key_len(char *command)
+{
+ u32 key_len = AES128_KEY_LENGTH;
+
+ if (!strcmp(command, "aes.192"))
+ key_len = AES192_KEY_LENGTH;
+ else if (!strcmp(command, "aes.256"))
+ key_len = AES256_KEY_LENGTH;
+
+ return key_len;
+}
+
/**
* do_aes() - Handle the "aes" command-line command
* @cmdtp: Command data struct pointer
@@ -27,13 +39,15 @@ static int do_aes(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
uint32_t key_addr, iv_addr, src_addr, dst_addr, len;
uint8_t *key_ptr, *iv_ptr, *src_ptr, *dst_ptr;
- uint8_t key_exp[AES_EXPAND_KEY_LENGTH];
- uint32_t aes_blocks;
+ u8 key_exp[AES256_EXPAND_KEY_LENGTH];
+ u32 aes_blocks, key_len;
int enc;
if (argc != 7)
return CMD_RET_USAGE;
+ key_len = aes_get_key_len(argv[0]);
+
if (!strncmp(argv[1], "enc", 3))
enc = 1;
else if (!strncmp(argv[1], "dec", 3))
@@ -47,23 +61,23 @@ static int do_aes(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
dst_addr = simple_strtoul(argv[5], NULL, 16);
len = simple_strtoul(argv[6], NULL, 16);
- key_ptr = (uint8_t *)map_sysmem(key_addr, 128 / 8);
+ key_ptr = (uint8_t *)map_sysmem(key_addr, key_len);
iv_ptr = (uint8_t *)map_sysmem(iv_addr, 128 / 8);
src_ptr = (uint8_t *)map_sysmem(src_addr, len);
dst_ptr = (uint8_t *)map_sysmem(dst_addr, len);
/* First we expand the key. */
- aes_expand_key(key_ptr, key_exp);
+ aes_expand_key(key_ptr, key_len, key_exp);
/* Calculate the number of AES blocks to encrypt. */
aes_blocks = DIV_ROUND_UP(len, AES_BLOCK_LENGTH);
if (enc)
- aes_cbc_encrypt_blocks(key_exp, iv_ptr, src_ptr, dst_ptr,
- aes_blocks);
+ aes_cbc_encrypt_blocks(key_len, key_exp, iv_ptr, src_ptr,
+ dst_ptr, aes_blocks);
else
- aes_cbc_decrypt_blocks(key_exp, iv_ptr, src_ptr, dst_ptr,
- aes_blocks);
+ aes_cbc_decrypt_blocks(key_len, key_exp, iv_ptr, src_ptr,
+ dst_ptr, aes_blocks);
unmap_sysmem(key_ptr);
unmap_sysmem(iv_ptr);
@@ -76,13 +90,13 @@ static int do_aes(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
/***************************************************/
#ifdef CONFIG_SYS_LONGHELP
static char aes_help_text[] =
- "enc key iv src dst len - Encrypt block of data $len bytes long\n"
+ "[.128,.192,.256] enc key iv src dst len - Encrypt block of data $len bytes long\n"
" at address $src using a key at address\n"
" $key with initialization vector at address\n"
" $iv. Store the result at address $dst.\n"
" The $len size must be multiple of 16 bytes.\n"
" The $key and $iv must be 16 bytes long.\n"
- "aes dec key iv src dst len - Decrypt block of data $len bytes long\n"
+ "aes [.128,.192,.256] dec key iv src dst len - Decrypt block of data $len bytes long\n"
" at address $src using a key at address\n"
" $key with initialization vector at address\n"
" $iv. Store the result at address $dst.\n"
@@ -92,6 +106,6 @@ static char aes_help_text[] =
U_BOOT_CMD(
aes, 7, 1, do_aes,
- "AES 128 CBC encryption",
+ "AES 128/192/256 CBC encryption",
aes_help_text
);
@@ -23,11 +23,18 @@ typedef unsigned int u32;
enum {
AES_STATECOLS = 4, /* columns in the state & expanded key */
- AES_KEYCOLS = 4, /* columns in a key */
- AES_ROUNDS = 10, /* rounds in encryption */
-
- AES_KEY_LENGTH = 128 / 8,
- AES_EXPAND_KEY_LENGTH = 4 * AES_STATECOLS * (AES_ROUNDS + 1),
+ AES128_KEYCOLS = 4, /* columns in a key for aes128 */
+ AES192_KEYCOLS = 6, /* columns in a key for aes128 */
+ AES256_KEYCOLS = 8, /* columns in a key for aes128 */
+ AES128_ROUNDS = 10, /* rounds in encryption for aes128 */
+ AES192_ROUNDS = 12, /* rounds in encryption for aes192 */
+ AES256_ROUNDS = 14, /* rounds in encryption for aes256 */
+ AES128_KEY_LENGTH = 128 / 8,
+ AES192_KEY_LENGTH = 192 / 8,
+ AES256_KEY_LENGTH = 256 / 8,
+ AES128_EXPAND_KEY_LENGTH = 4 * AES_STATECOLS * (AES128_ROUNDS + 1),
+ AES192_EXPAND_KEY_LENGTH = 4 * AES_STATECOLS * (AES192_ROUNDS + 1),
+ AES256_EXPAND_KEY_LENGTH = 4 * AES_STATECOLS * (AES256_ROUNDS + 1),
AES_BLOCK_LENGTH = 128 / 8,
};
@@ -37,28 +44,31 @@ enum {
* Expand a key into a key schedule, which is then used for the other
* operations.
*
- * @key Key, of length AES_KEY_LENGTH bytes
+ * @key Key
+ * @key_size Size of the key (in bits)
* @expkey Buffer to place expanded key, AES_EXPAND_KEY_LENGTH
*/
-void aes_expand_key(u8 *key, u8 *expkey);
+void aes_expand_key(u8 *key, u32 key_size, u8 *expkey);
/**
* aes_encrypt() - Encrypt single block of data with AES 128
*
+ * @key_size Size of the aes key (in bits)
* @in Input data
* @expkey Expanded key to use for encryption (from aes_expand_key())
* @out Output data
*/
-void aes_encrypt(u8 *in, u8 *expkey, u8 *out);
+void aes_encrypt(u32 key_size, u8 *in, u8 *expkey, u8 *out);
/**
* aes_decrypt() - Decrypt single block of data with AES 128
*
+ * @key_size Size of the aes key (in bits)
* @in Input data
* @expkey Expanded key to use for decryption (from aes_expand_key())
* @out Output data
*/
-void aes_decrypt(u8 *in, u8 *expkey, u8 *out);
+void aes_decrypt(u32 key_size, u8 *in, u8 *expkey, u8 *out);
/**
* Apply chain data to the destination using EOR
@@ -74,25 +84,27 @@ void aes_apply_cbc_chain_data(u8 *cbc_chain_data, u8 *src, u8 *dst);
/**
* aes_cbc_encrypt_blocks() - Encrypt multiple blocks of data with AES CBC.
*
+ * @key_size Size of the aes key (in bits)
* @key_exp Expanded key to use
* @iv Initialization vector
* @src Source data to encrypt
* @dst Destination buffer
* @num_aes_blocks Number of AES blocks to encrypt
*/
-void aes_cbc_encrypt_blocks(u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
+void aes_cbc_encrypt_blocks(u32 key_size, u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
u32 num_aes_blocks);
/**
* Decrypt multiple blocks of data with AES CBC.
*
+ * @key_size Size of the aes key (in bits)
* @key_exp Expanded key to use
* @iv Initialization vector
* @src Source data to decrypt
* @dst Destination buffer
* @num_aes_blocks Number of AES blocks to decrypt
*/
-void aes_cbc_decrypt_blocks(u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
+void aes_cbc_decrypt_blocks(u32 key_size, u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
u32 num_aes_blocks);
#endif /* _AES_REF_H_ */
@@ -508,50 +508,79 @@ static u8 rcon[11] = {
0x00, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36
};
+static u32 aes_get_rounds(u32 key_len)
+{
+ u32 rounds = AES128_ROUNDS;
+
+ if (key_len == AES192_KEY_LENGTH)
+ rounds = AES192_ROUNDS;
+ else if (key_len == AES256_KEY_LENGTH)
+ rounds = AES256_ROUNDS;
+
+ return rounds;
+}
+
+static u32 aes_get_keycols(u32 key_len)
+{
+ u32 keycols = AES128_KEYCOLS;
+
+ if (key_len == AES192_KEY_LENGTH)
+ keycols = AES192_KEYCOLS;
+ else if (key_len == AES256_KEY_LENGTH)
+ keycols = AES256_KEYCOLS;
+
+ return keycols;
+}
+
/* produce AES_STATECOLS bytes for each round */
-void aes_expand_key(u8 *key, u8 *expkey)
+void aes_expand_key(u8 *key, u32 key_len, u8 *expkey)
{
u8 tmp0, tmp1, tmp2, tmp3, tmp4;
- u32 idx;
+ u32 idx, aes_rounds, aes_keycols;
- memcpy(expkey, key, AES_KEYCOLS * 4);
+ aes_rounds = aes_get_rounds(key_len);
+ aes_keycols = aes_get_keycols(key_len);
- for (idx = AES_KEYCOLS; idx < AES_STATECOLS * (AES_ROUNDS + 1); idx++) {
+ memcpy(expkey, key, key_len);
+
+ for (idx = aes_keycols; idx < AES_STATECOLS * (aes_rounds + 1); idx++) {
tmp0 = expkey[4*idx - 4];
tmp1 = expkey[4*idx - 3];
tmp2 = expkey[4*idx - 2];
tmp3 = expkey[4*idx - 1];
- if (!(idx % AES_KEYCOLS)) {
+ if (!(idx % aes_keycols)) {
tmp4 = tmp3;
tmp3 = sbox[tmp0];
- tmp0 = sbox[tmp1] ^ rcon[idx / AES_KEYCOLS];
+ tmp0 = sbox[tmp1] ^ rcon[idx / aes_keycols];
tmp1 = sbox[tmp2];
tmp2 = sbox[tmp4];
- } else if ((AES_KEYCOLS > 6) && (idx % AES_KEYCOLS == 4)) {
+ } else if ((aes_keycols > 6) && (idx % aes_keycols == 4)) {
tmp0 = sbox[tmp0];
tmp1 = sbox[tmp1];
tmp2 = sbox[tmp2];
tmp3 = sbox[tmp3];
}
- expkey[4*idx+0] = expkey[4*idx - 4*AES_KEYCOLS + 0] ^ tmp0;
- expkey[4*idx+1] = expkey[4*idx - 4*AES_KEYCOLS + 1] ^ tmp1;
- expkey[4*idx+2] = expkey[4*idx - 4*AES_KEYCOLS + 2] ^ tmp2;
- expkey[4*idx+3] = expkey[4*idx - 4*AES_KEYCOLS + 3] ^ tmp3;
+ expkey[4*idx+0] = expkey[4*idx - 4*aes_keycols + 0] ^ tmp0;
+ expkey[4*idx+1] = expkey[4*idx - 4*aes_keycols + 1] ^ tmp1;
+ expkey[4*idx+2] = expkey[4*idx - 4*aes_keycols + 2] ^ tmp2;
+ expkey[4*idx+3] = expkey[4*idx - 4*aes_keycols + 3] ^ tmp3;
}
}
/* encrypt one 128 bit block */
-void aes_encrypt(u8 *in, u8 *expkey, u8 *out)
+void aes_encrypt(u32 key_len, u8 *in, u8 *expkey, u8 *out)
{
u8 state[AES_STATECOLS * 4];
- u32 round;
+ u32 round, aes_rounds;
+
+ aes_rounds = aes_get_rounds(key_len);
memcpy(state, in, AES_STATECOLS * 4);
add_round_key((u32 *)state, (u32 *)expkey);
- for (round = 1; round < AES_ROUNDS + 1; round++) {
- if (round < AES_ROUNDS)
+ for (round = 1; round < aes_rounds + 1; round++) {
+ if (round < aes_rounds)
mix_sub_columns(state);
else
shift_rows(state);
@@ -563,18 +592,20 @@ void aes_encrypt(u8 *in, u8 *expkey, u8 *out)
memcpy(out, state, sizeof(state));
}
-void aes_decrypt(u8 *in, u8 *expkey, u8 *out)
+void aes_decrypt(u32 key_len, u8 *in, u8 *expkey, u8 *out)
{
u8 state[AES_STATECOLS * 4];
- int round;
+ int round, aes_rounds;
+
+ aes_rounds = aes_get_rounds(key_len);
memcpy(state, in, sizeof(state));
add_round_key((u32 *)state,
- (u32 *)expkey + AES_ROUNDS * AES_STATECOLS);
+ (u32 *)expkey + aes_rounds * AES_STATECOLS);
inv_shift_rows(state);
- for (round = AES_ROUNDS; round--; ) {
+ for (round = aes_rounds; round--; ) {
add_round_key((u32 *)state,
(u32 *)expkey + round * AES_STATECOLS);
if (round)
@@ -600,7 +631,7 @@ void aes_apply_cbc_chain_data(u8 *cbc_chain_data, u8 *src, u8 *dst)
*dst++ = *src++ ^ *cbc_chain_data++;
}
-void aes_cbc_encrypt_blocks(u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
+void aes_cbc_encrypt_blocks(u32 key_len, u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
u32 num_aes_blocks)
{
u8 tmp_data[AES_BLOCK_LENGTH];
@@ -616,7 +647,7 @@ void aes_cbc_encrypt_blocks(u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
debug_print_vector("AES Xor", AES_BLOCK_LENGTH, tmp_data);
/* Encrypt the AES block */
- aes_encrypt(tmp_data, key_exp, dst);
+ aes_encrypt(key_len, tmp_data, key_exp, dst);
debug_print_vector("AES Dst", AES_BLOCK_LENGTH, dst);
/* Update pointers for next loop. */
@@ -626,7 +657,7 @@ void aes_cbc_encrypt_blocks(u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
}
}
-void aes_cbc_decrypt_blocks(u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
+void aes_cbc_decrypt_blocks(u32 key_len, u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
u32 num_aes_blocks)
{
u8 tmp_data[AES_BLOCK_LENGTH], tmp_block[AES_BLOCK_LENGTH];
@@ -642,7 +673,7 @@ void aes_cbc_decrypt_blocks(u8 *key_exp, u8 *iv, u8 *src, u8 *dst,
memcpy(tmp_block, src, AES_BLOCK_LENGTH);
/* Decrypt the AES block */
- aes_decrypt(src, key_exp, tmp_data);
+ aes_decrypt(key_len, src, key_exp, tmp_data);
debug_print_vector("AES Xor", AES_BLOCK_LENGTH, tmp_data);
/* Apply the chain data */
Until now, we only support aes128. This commit add the support of aes192 and aes256. Signed-off-by: Philippe Reynes <philippe.reynes at softathome.com> --- arch/arm/mach-tegra/tegra20/crypto.c | 41 ++++++++++--------- cmd/aes.c | 38 ++++++++++++------ include/uboot_aes.h | 34 ++++++++++------ lib/aes.c | 77 +++++++++++++++++++++++++----------- 4 files changed, 125 insertions(+), 65 deletions(-) Changelog: v4: - update the tge driver crypto for tegra20 to use the new aes api. (squash previous patch 3, feedback from Simon) v3: - no change v2: - fix the help for the aes command