diff mbox

[v3,3/3] arm64: audit: Add audit hook in ptrace/syscall_trace

Message ID 1391410590-4884-4-git-send-email-takahiro.akashi@linaro.org
State New
Headers show

Commit Message

AKASHI Takahiro Feb. 3, 2014, 6:56 a.m. UTC
This patch adds auditing functions on entry to or exit from
every system call invocation.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 arch/arm64/include/asm/thread_info.h |    1 +
 arch/arm64/kernel/entry.S            |    3 +++
 arch/arm64/kernel/ptrace.c           |   10 ++++++++++
 3 files changed, 14 insertions(+)

Comments

AKASHI Takahiro Feb. 5, 2014, 1:54 a.m. UTC | #1
On 02/05/2014 02:31 AM, Will Deacon wrote:
> On Mon, Feb 03, 2014 at 06:56:30AM +0000, AKASHI Takahiro wrote:
>> This patch adds auditing functions on entry to or exit from
>> every system call invocation.
>>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>> ---
>>   arch/arm64/include/asm/thread_info.h |    1 +
>>   arch/arm64/kernel/entry.S            |    3 +++
>>   arch/arm64/kernel/ptrace.c           |   10 ++++++++++
>>   3 files changed, 14 insertions(+)
>>
>> diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
>> index 720e70b..7468388 100644
>> --- a/arch/arm64/include/asm/thread_info.h
>> +++ b/arch/arm64/include/asm/thread_info.h
>> @@ -101,6 +101,7 @@ static inline struct thread_info *current_thread_info(void)
>>   #define TIF_NEED_RESCHED	1
>>   #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
>>   #define TIF_SYSCALL_TRACE	8
>> +#define TIF_SYSCALL_AUDIT	9
>>   #define TIF_POLLING_NRFLAG	16
>>   #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
>>   #define TIF_FREEZE		19
>> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
>> index 827cbad..83c4b29 100644
>> --- a/arch/arm64/kernel/entry.S
>> +++ b/arch/arm64/kernel/entry.S
>> @@ -630,6 +630,9 @@ el0_svc_naked:					// compat entry point
>>   	get_thread_info tsk
>>   	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
>>   	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
>> +#ifdef CONFIG_AUDITSYSCALL
>> +	tbnz	x16, #TIF_SYSCALL_AUDIT, __sys_trace // auditing syscalls?
>> +#endif
>
> Could we avoid the back-to-back tbnz instructions with a single mask? It's
> not obvious that it will end up any better, but it would be good to know.

When first implementing ftrace support, TIF_SYSCALL_TRACEPOINT is defined as 10
and 'tst' instruction doesn't allow the following code:
     tst x16, #(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_TRACEPOINT)

That is why I've used "back-to-back" tbnz since then, but now that I'm going to
submit ftrace, audit and later seccomp, I will replace it with:
     #define TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE|TRACEPOINT|AUDIT|SECCOMP)

     tst x16, #TIF_SYSCALL_WORK
     b.ne __syscall_trace


>>   	adr	lr, ret_fast_syscall		// return address
>>   	cmp     scno, sc_nr                     // check upper syscall limit
>>   	b.hs	ni_sys
>> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
>> index 6777a21..75a3f23 100644
>> --- a/arch/arm64/kernel/ptrace.c
>> +++ b/arch/arm64/kernel/ptrace.c
>> @@ -19,6 +19,7 @@
>>    * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>>    */
>>
>> +#include <linux/audit.h>
>>   #include <linux/kernel.h>
>>   #include <linux/sched.h>
>>   #include <linux/mm.h>
>> @@ -38,6 +39,7 @@
>>   #include <asm/compat.h>
>>   #include <asm/debug-monitors.h>
>>   #include <asm/pgtable.h>
>> +#include <asm/syscall.h>
>>   #include <asm/traps.h>
>>   #include <asm/system_misc.h>
>>
>> @@ -1064,6 +1066,14 @@ asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
>>   {
>>   	unsigned long saved_reg;
>>
>> +	if (dir)
>> +		audit_syscall_exit(regs);
>> +	else
>> +		audit_syscall_entry(syscall_get_arch(current, regs),
>> +			(int)regs->syscallno,
>> +			regs->orig_x0, regs->regs[1],
>> +			regs->regs[2], regs->regs[3]);
>> +
>
> Do we really want to perform the audit checks before the tracehook calls?
> Remember that the latter can rewrite all of the registers.

OK. I will change the code to make calls in the following order:
On entry,
    *secure_computing
    *tracehook_report_syscall(ENTER)
    *trace_sys_enter
    *audit_syscall_entry
On exit,
    *audit_syscall_exit
    *trace_sys_exit
    *tracehook_report_syscall(EXIT)

The order here is the exact same as on x86, but such change might
decrease the readability in syscall_trace().

Thanks,
-Takahiro AKASHI

> Will
>
diff mbox

Patch

diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 720e70b..7468388 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -101,6 +101,7 @@  static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
+#define TIF_SYSCALL_AUDIT	9
 #define TIF_POLLING_NRFLAG	16
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 827cbad..83c4b29 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -630,6 +630,9 @@  el0_svc_naked:					// compat entry point
 	get_thread_info tsk
 	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall tracing
 	tbnz	x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls?
+#ifdef CONFIG_AUDITSYSCALL
+	tbnz	x16, #TIF_SYSCALL_AUDIT, __sys_trace // auditing syscalls?
+#endif
 	adr	lr, ret_fast_syscall		// return address
 	cmp     scno, sc_nr                     // check upper syscall limit
 	b.hs	ni_sys
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 6777a21..75a3f23 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -19,6 +19,7 @@ 
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/audit.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -38,6 +39,7 @@ 
 #include <asm/compat.h>
 #include <asm/debug-monitors.h>
 #include <asm/pgtable.h>
+#include <asm/syscall.h>
 #include <asm/traps.h>
 #include <asm/system_misc.h>
 
@@ -1064,6 +1066,14 @@  asmlinkage int syscall_trace(int dir, struct pt_regs *regs)
 {
 	unsigned long saved_reg;
 
+	if (dir)
+		audit_syscall_exit(regs);
+	else
+		audit_syscall_entry(syscall_get_arch(current, regs),
+			(int)regs->syscallno,
+			regs->orig_x0, regs->regs[1],
+			regs->regs[2], regs->regs[3]);
+
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return regs->syscallno;