[v2,8/8] rockchip: puma: enable new usb config options

From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>

With recently added changes we get support for usb3 including handling
of the phys (type-c and inno-usb2), so enable the necessary config
options on puma.

Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
---
 configs/puma-rk3399_defconfig | 5 +++++
 1 file changed, 5 insertions(+)

> On 04.06.2020, at 12:09, Heiko Stuebner <heiko at sntech.de> wrote:
> 
> From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
> 
> With recently added changes we get support for usb3 including handling
> of the phys (type-c and inno-usb2), so enable the necessary config
> options on puma.
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>

Reviewed-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>

On 2020/6/4 ??6:09, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
>
> With recently added changes we get support for usb3 including handling
> of the phys (type-c and inno-usb2), so enable the necessary config
> options on puma.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/puma-rk3399_defconfig | 5 +++++
>   1 file changed, 5 insertions(+)
>
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index 31d4eb3471..6b7d2ee6b8 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -59,6 +59,8 @@ CONFIG_PHY_MICREL_KSZ90X1=y
>   CONFIG_DM_ETH=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_TYPEC=y
>   CONFIG_DM_PMIC_FAN53555=y
>   CONFIG_PMIC_RK8XX=y
>   CONFIG_SPL_DM_REGULATOR=y
> @@ -67,6 +69,7 @@ CONFIG_SPL_DM_REGULATOR_FIXED=y
>   CONFIG_DM_REGULATOR_GPIO=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
> +CONFIG_DM_RESET=y
>   CONFIG_DM_RTC=y
>   CONFIG_RTC_ISL1208=y
>   CONFIG_DEBUG_UART_SHIFT=2
> @@ -77,6 +80,8 @@ CONFIG_USB_XHCI_HCD=y
>   CONFIG_USB_XHCI_DWC3=y
>   CONFIG_USB_EHCI_HCD=y
>   CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
>   CONFIG_USB_HOST_ETHER=y
>   CONFIG_USB_ETHER_ASIX=y
>   CONFIG_USB_ETHER_ASIX88179=y