[v2,16/23] ti: Drop sdp4430 board

Message ID	20200527125637.149189-17-jagan@amarulasolutions.com
State	New
Headers	show List-Id: U-Boot discussion <u-boot.lists.denx.de> From: jagan at amarulasolutions.com (Jagan Teki) Date: Wed, 27 May 2020 18:26:30 +0530 Subject: [PATCH v2 16/23] ti: Drop sdp4430 board In-Reply-To: <20200527125637.149189-1-jagan@amarulasolutions.com> References: <20200527125637.149189-1-jagan@amarulasolutions.com> Message-ID: <20200527125637.149189-17-jagan@amarulasolutions.com>
Series	spi: dm-conversion (part1) \| expand [v2,00/23] spi: dm-conversion (part1) [v2,01/23] configs: igep00x0: Enable DM_SPI [v2,02/23] am335x: sl50: Enable DM_SPI [v2,03/23] am335x: baltos: Enable DM_SPI [v2,04/23] am335x: igep003x: Enable DM_SPI [v2,05/23] siemens: draco: Enable DM_SPI, DM_SPI_FLASH [v2,06/23] siemens: pxm2: Enable DM_SPI, DM_SPI_FLASH [v2,07/23] siemens: rut: Enable DM_SPI, DM_SPI_FLASH [v2,08/23] compulab: Drop cm_t54 [v2,09/23] compulab: Drop cm_t35 [v2,10/23] overo: Drop omap3 overo [v2,11/23] pandora: Drop omap3 pandora [v2,12/23] logicpd: Drop omap3 zoom1 [v2,13/23] quipos: Drop omap3 cairo [v2,14/23] gumstix: Drop duovero [v2,15/23] ti: Drop panda board [v2,16/23] ti: Drop sdp4430 board [v2,17/23] ti: Drop omap5 uevm [v2,18/23] birdland: Drop bav335x [v2,19/23] gumstix: Drop pepper [v2,20/23] phytec: Drop pcm051 [v2,21/23] silica: Drop pengwyn [v2,22/23] spi: omap3: Drop nondm code [v2,23/23] doc: driver-model: Update SPI migration status

diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig index 4cc360f38a..f1c60f3562 100644 --- a/arch/arm/mach-omap2/omap4/Kconfig +++ b/arch/arm/mach-omap2/omap4/Kconfig @@ -4,9 +4,6 @@ choice prompt "OMAP4 board select" optional -config TARGET_OMAP4_SDP4430 - bool "TI OMAP4 SDP4430" - config TARGET_KC1 bool "Amazon Kindle Fire (first generation)" @@ -15,7 +12,6 @@ endchoice config SYS_SOC default "omap4" -source "board/ti/sdp4430/Kconfig" source "board/amazon/kc1/Kconfig" endif diff --git a/board/ti/sdp4430/Kconfig b/board/ti/sdp4430/Kconfig deleted file mode 100644 index 36f1852821..0000000000 --- a/board/ti/sdp4430/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_OMAP4_SDP4430 - -config SYS_BOARD - default "sdp4430" - -config SYS_VENDOR - default "ti" - -config SYS_CONFIG_NAME - default "omap4_sdp4430" - -config CMD_BAT - bool "Enable board-specific battery command" - -endif diff --git a/board/ti/sdp4430/MAINTAINERS b/board/ti/sdp4430/MAINTAINERS deleted file mode 100644 index ac4d0ccc19..0000000000 --- a/board/ti/sdp4430/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SDP4430 BOARD -M: Lokesh Vutla <lokeshvutla at ti.com> -S: Maintained -F: board/ti/sdp4430/ -F: include/configs/omap4_sdp4430.h -F: configs/omap4_sdp4430_defconfig diff --git a/board/ti/sdp4430/Makefile b/board/ti/sdp4430/Makefile deleted file mode 100644 index ae06945612..0000000000 --- a/board/ti/sdp4430/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. - -obj-y := sdp.o - -ifndef CONFIG_SPL_BUILD -obj-y += cmd_bat.o -endif diff --git a/board/ti/sdp4430/cmd_bat.c b/board/ti/sdp4430/cmd_bat.c deleted file mode 100644 index 6c1e6ca393..0000000000 --- a/board/ti/sdp4430/cmd_bat.c +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2010 Texas Instruments - */ - -#include <common.h> -#include <command.h> - -#ifdef CONFIG_CMD_BAT -#include <twl6030.h> - -int do_vbat(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - if (argc == 2) { - if (strncmp(argv[1], "startcharge", 12) == 0) - twl6030_start_usb_charging(); - else if (strncmp(argv[1], "stopcharge", 11) == 0) - twl6030_stop_usb_charging(); - else if (strncmp(argv[1], "status", 7) == 0) { - twl6030_get_battery_voltage(); - twl6030_get_battery_current(); - } else { - goto bat_cmd_usage; - } - } else { - goto bat_cmd_usage; - } - return 0; - -bat_cmd_usage: - return cmd_usage(cmdtp); -} - -U_BOOT_CMD( - bat, 2, 1, do_vbat, - "battery charging, voltage/current measurements", - "status - display battery voltage and current\n" - "bat startcharge - start charging via USB\n" - "bat stopcharge - stop charging\n" -); -#endif /* CONFIG_CMD_BAT */ diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c deleted file mode 100644 index a5b3504045..0000000000 --- a/board/ti/sdp4430/sdp.c +++ /dev/null @@ -1,100 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, <www.ti.com> - * Aneesh V <aneesh at ti.com> - * Steve Sakoman <steve at sakoman.com> - */ -#include <common.h> -#include <init.h> -#include <net.h> -#include <twl6030.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mmc_host_def.h> - -#include "sdp4430_mux_data.h" - -DECLARE_GLOBAL_DATA_PTR; - -const struct omap_sysinfo sysinfo = { - "Board: OMAP4430 SDP\n" -}; - -/** - * @brief board_init - * - * @return 0 - */ -int board_init(void) -{ - gpmc_init(); - - gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ - - return 0; -} - -int board_eth_init(bd_t *bis) -{ - return 0; -} - -/** - * @brief misc_init_r - Configure SDP board specific configurations - * such as power configurations, ethernet initialization as phase2 of - * boot sequence - * - * @return 0 - */ -int misc_init_r(void) -{ -#ifdef CONFIG_TWL6030_POWER - twl6030_init_battery_charging(); -#endif - return 0; -} - -void set_muxconf_regs(void) -{ - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_essential, - sizeof(wkup_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - if ((omap_revision() >= OMAP4460_ES1_0) && - (omap_revision() < OMAP4470_ES1_0)) - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_essential_4460, - sizeof(wkup_padconf_array_essential_4460) / - sizeof(struct pad_conf_entry)); -} - -#if defined(CONFIG_MMC) -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(0, 0, 0, -1, -1); - omap_mmc_init(1, 0, 0, -1, -1); - return 0; -} - -#if !defined(CONFIG_SPL_BUILD) -void board_mmc_power_init(void) -{ - twl6030_power_mmc_init(0); - twl6030_power_mmc_init(1); -} -#endif -#endif - -/* - * get_board_rev() - get board revision - */ -u32 get_board_rev(void) -{ - return 0x20; -} diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h deleted file mode 100644 index 934419f40e..0000000000 --- a/board/ti/sdp4430/sdp4430_mux_data.h +++ /dev/null @@ -1,67 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, <www.ti.com> - * - * Balaji Krishnamoorthy <balajitk at ti.com> - * Aneesh V <aneesh at ti.com> - */ -#ifndef _SDP4430_MUX_DATA_H -#define _SDP4430_MUX_DATA_H - -#include <asm/arch/mux_omap4.h> - -const struct pad_conf_entry core_padconf_array_essential[] = { - -{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ -{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ -{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ -{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ -{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ -{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ -{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ -{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ -{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ -{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ -{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ -{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ -{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ -{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ -{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ -{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ -{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ -{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ -{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ -{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ -{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ -{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ -{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ -{UART3_TX_IRTX, (M0)}, /* uart3_tx */ -{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ -{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ -{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ -{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ -{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ -{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ -{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ -{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ -{USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */ -{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */ -{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */ -}; - -const struct pad_conf_entry wkup_padconf_array_essential[] = { - -{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ -{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ -{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */ - -}; - -const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { - -{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */ - -}; - -#endif /* _SDP4430_MUX_DATA_H */ diff --git a/configs/omap4_sdp4430_defconfig b/configs/omap4_sdp4430_defconfig deleted file mode 100644 index 219721388f..0000000000 --- a/configs/omap4_sdp4430_defconfig +++ /dev/null @@ -1,42 +0,0 @@ -CONFIG_ARM=y -# CONFIG_SPL_USE_ARCH_MEMCPY is not set -# CONFIG_SPL_USE_ARCH_MEMSET is not set -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_ENV_OFFSET=0xE0000 -CONFIG_OMAP44XX=y -CONFIG_TARGET_OMAP4_SDP4430=y -CONFIG_CMD_BAT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0x40300000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_SPL_I2C_SUPPORT is not set -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -CONFIG_CMD_EXT4_WRITE=y -# CONFIG_EFI_PARTITION is not set -CONFIG_SPL_PARTITION_UUIDS=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_MMC_OMAP_HS=y -CONFIG_CONS_INDEX=3 -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_UDC=y -CONFIG_USB_OMAP3=y -CONFIG_USB_GADGET=y -CONFIG_FAT_WRITE=y -# CONFIG_REGEX is not set -CONFIG_OF_LIBFDT=y -# CONFIG_EFI_LOADER is not set diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h deleted file mode 100644 index 884f45df22..0000000000 --- a/include/configs/omap4_sdp4430.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated. - * Aneesh V <aneesh at ti.com> - * Steve Sakoman <steve at sakoman.com> - * - * Configuration settings for the TI SDP4430 board. - * See ti_omap4_common.h for OMAP4 common part - */ - -#ifndef __CONFIG_SDP4430_H -#define __CONFIG_SDP4430_H - -/* - * High Level Configuration Options - */ -#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_4430SDP - -#include <configs/ti_omap4_common.h> - -/* ENV related config options */ -#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ - -#endif /* __CONFIG_SDP4430_H */

[v2,16/23] ti: Drop sdp4430 board

Commit Message

Patch