@@ -73,8 +73,6 @@
#define LINK_UP BIT(16)
#define DRA7XX_CPU_TO_BUS_ADDR 0x0FFFFFFF
-#define EXP_CAP_ID_OFFSET 0x70
-
#define PCIECTRL_TI_CONF_INTX_ASSERT 0x0124
#define PCIECTRL_TI_CONF_INTX_DEASSERT 0x0128
@@ -142,7 +140,7 @@ static int dra7xx_pcie_establish_link(struct dw_pcie *pci)
struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
struct device *dev = pci->dev;
u32 reg;
- u32 exp_cap_off = EXP_CAP_ID_OFFSET;
+ u32 exp_cap_off = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
if (dw_pcie_link_up(pci)) {
dev_err(dev, "link is already up\n");
@@ -96,8 +96,6 @@
#define LEG_EP 0x1
#define RC 0x2
-#define EXP_CAP_ID_OFFSET 0x70
-
#define KS_PCIE_SYSCLOCKOUTEN BIT(0)
#define AM654_PCIE_DEV_TYPE_MASK 0x3
@@ -1125,22 +1123,23 @@ static int ks_pcie_am654_set_mode(struct device *dev,
static void ks_pcie_set_link_speed(struct dw_pcie *pci, int link_speed)
{
u32 val;
+ u32 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
dw_pcie_dbi_ro_wr_en(pci);
- val = dw_pcie_readl_dbi(pci, EXP_CAP_ID_OFFSET + PCI_EXP_LNKCAP);
+ val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
if ((val & PCI_EXP_LNKCAP_SLS) != link_speed) {
val &= ~((u32)PCI_EXP_LNKCAP_SLS);
val |= link_speed;
- dw_pcie_writel_dbi(pci, EXP_CAP_ID_OFFSET + PCI_EXP_LNKCAP,
+ dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP,
val);
}
- val = dw_pcie_readl_dbi(pci, EXP_CAP_ID_OFFSET + PCI_EXP_LNKCTL2);
+ val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL2);
if ((val & PCI_EXP_LNKCAP_SLS) != link_speed) {
val &= ~((u32)PCI_EXP_LNKCAP_SLS);
val |= link_speed;
- dw_pcie_writel_dbi(pci, EXP_CAP_ID_OFFSET + PCI_EXP_LNKCTL2,
+ dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL2,
val);
}
@@ -65,8 +65,6 @@ struct pcie_app_reg {
/* CR6 */
#define MSI_CTRL_INT (1 << 26)
-#define EXP_CAP_ID_OFFSET 0x70
-
#define to_spear13xx_pcie(x) dev_get_drvdata((x)->dev)
static int spear13xx_pcie_establish_link(struct spear13xx_pcie *spear13xx_pcie)
@@ -75,7 +73,7 @@ static int spear13xx_pcie_establish_link(struct spear13xx_pcie *spear13xx_pcie)
struct pcie_port *pp = &pci->pp;
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
u32 val;
- u32 exp_cap_off = EXP_CAP_ID_OFFSET;
+ u32 exp_cap_off = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
if (dw_pcie_link_up(pci)) {
dev_err(pci->dev, "link already up\n");
While the Designware controller appears to hard code the PCI_CAP_ID_EXP capability register at 0x70, there's no need to hard code this in the driver as it is discoverable. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: linux-omap@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> --- drivers/pci/controller/dwc/pci-dra7xx.c | 4 +--- drivers/pci/controller/dwc/pci-keystone.c | 11 +++++------ drivers/pci/controller/dwc/pcie-spear13xx.c | 4 +--- 3 files changed, 7 insertions(+), 12 deletions(-) -- 2.25.1