@@ -460,6 +460,9 @@ static int scmi_bind(struct udevice *dev)
case SCMI_PROTOCOL_ID_CLOCK:
drv = DM_GET_DRIVER(scmi_clock);
break;
+ case SCMI_PROTOCOL_ID_RESET_DOMAIN:
+ drv = DM_GET_DRIVER(scmi_reset_domain);
+ break;
default:
dev_info(dev, "Ignore unsupported SCMI protocol %u\n",
protocol_id);
@@ -173,4 +173,12 @@ config RESET_RASPBERRYPI
relevant. This driver provides a reset controller capable of
interfacing with RPi4's co-processor and model these firmware
initialization routines as reset lines.
+
+config RESET_SCMI
+ bool "Enable SCMI reset domain driver"
+ select SCMI_FIRMWARE
+ help
+ Enable this option if you want to support reset controller
+ devices exposed by a SCMI agent based on SCMI reset domain
+ protocol communication with a SCMI server.
endmenu
@@ -26,3 +26,4 @@ obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
obj-$(CONFIG_RESET_SIFIVE) += reset-sifive.o
obj-$(CONFIG_RESET_SYSCON) += reset-syscon.o
obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
+obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
new file mode 100644
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-2020 Linaro Limited
+ */
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <reset-uclass.h>
+#include <scmi.h>
+#include <asm/types.h>
+
+#define SCMI_RD_NAME_LEN 16
+
+#define SCMI_RD_RESET_FLAG_ASSERT BIT(1)
+#define SCMI_RD_RESET_FLAG_DEASSERT 0
+
+enum scmi_reset_domain_message_id {
+ SCMI_RESET_DOMAIN_ATTRIBUTES = 0x3,
+ SCMI_RESET_DOMAIN_RESET = 0x4,
+};
+
+/**
+ * struct scmi_rd_attr_in - Payload for RESET_DOMAIN_ATTRIBUTES message
+ * @domain_id: SCMI reset domain ID
+ */
+struct scmi_rd_attr_in {
+ u32 domain_id;
+};
+
+/**
+ * struct scmi_rd_attr_out - Payload for RESET_DOMAIN_ATTRIBUTES response
+ * @status: SCMI command status
+ * @attributes: Retrieved attributes of the reset domain
+ * @latency: Reset cycle max lantency
+ * @name: Reset domain name
+ */
+struct scmi_rd_attr_out {
+ s32 status;
+ u32 attributes;
+ u32 latency;
+ char name[SCMI_RD_NAME_LEN];
+};
+
+/**
+ * struct scmi_rd_reset_in - Message payload for RESET command
+ * @domain_id: SCMI reset domain ID
+ * @flags: Flags for the reset request
+ * @reset_state: Reset target state
+ */
+struct scmi_rd_reset_in {
+ u32 domain_id;
+ u32 flags;
+ u32 reset_state;
+};
+
+/**
+ * struct scmi_rd_reset_out - Response payload for RESET command
+ * @status: SCMI command status
+ */
+struct scmi_rd_reset_out {
+ s32 status;
+};
+
+static int scmi_reset_set_state(struct reset_ctl *rst, int assert_not_deassert)
+{
+ struct scmi_rd_reset_in in = {
+ .domain_id = rst->id,
+ .flags = assert_not_deassert ? SCMI_RD_RESET_FLAG_ASSERT :
+ SCMI_RD_RESET_FLAG_DEASSERT,
+ .reset_state = 0,
+ };
+ struct scmi_rd_reset_out out;
+ struct scmi_msg scmi_msg = {
+ .protocol_id = SCMI_PROTOCOL_ID_RESET_DOMAIN,
+ .message_id = SCMI_RESET_DOMAIN_RESET,
+ .in_msg = (u8 *)&in,
+ .in_msg_sz = sizeof(in),
+ .out_msg = (u8 *)&out,
+ .out_msg_sz = sizeof(out),
+ };
+ int ret;
+
+ ret = scmi_send_and_process_msg(rst->dev->parent, &scmi_msg);
+ if (ret)
+ return ret;
+
+ return scmi_to_linux_errno(out.status);
+}
+
+static int scmi_reset_assert(struct reset_ctl *rst)
+{
+ return scmi_reset_set_state(rst, SCMI_RD_RESET_FLAG_ASSERT);
+}
+
+static int scmi_reset_deassert(struct reset_ctl *rst)
+{
+ return scmi_reset_set_state(rst, SCMI_RD_RESET_FLAG_DEASSERT);
+}
+
+static int scmi_reset_request(struct reset_ctl *rst)
+{
+ struct scmi_rd_attr_in in = {
+ .domain_id = rst->id,
+ };
+ struct scmi_rd_attr_out out;
+ struct scmi_msg scmi_msg = {
+ .protocol_id = SCMI_PROTOCOL_ID_RESET_DOMAIN,
+ .message_id = SCMI_RESET_DOMAIN_RESET,
+ .in_msg = (u8 *)&in,
+ .in_msg_sz = sizeof(in),
+ .out_msg = (u8 *)&out,
+ .out_msg_sz = sizeof(out),
+ };
+ int ret;
+
+ /*
+ * We don't really care about the attribute, just check
+ * the reset domain exists.
+ */
+ ret = scmi_send_and_process_msg(rst->dev->parent, &scmi_msg);
+ if (ret)
+ return ret;
+
+ return scmi_to_linux_errno(out.status);
+}
+
+static int scmi_reset_rfree(struct reset_ctl *rst)
+{
+ return 0;
+}
+
+static const struct reset_ops scmi_reset_domain_ops = {
+ .request = scmi_reset_request,
+ .rfree = scmi_reset_rfree,
+ .rst_assert = scmi_reset_assert,
+ .rst_deassert = scmi_reset_deassert,
+};
+
+U_BOOT_DRIVER(scmi_reset_domain) = {
+ .name = "scmi_reset_domain",
+ .id = UCLASS_RESET,
+ .ops = &scmi_reset_domain_ops,
+};
This change introduces a reset controller driver for SCMI agent devices. When SCMI agent and SCMI reset domain drivers are enabled, SCMI agent binds a reset controller device for each SCMI reset domain protocol devices enabled in the FDT. SCMI reset driver is embedded upon CONFIG_RESET_SCMI=y. If enabled, CONFIG_SCMI_AGENT is also enabled. SCMI Reset Domain protocol is defined in the SCMI specification [1]. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> --- Changes in v2: - Change reset request() method to at least check the reset domain exists by sending a SCMI RESET_DOMAIN_ATTRIBUTE message. - Add inline description for the several structures. - Patch v1 R-b tag not applied since the above changes in this v2. --- drivers/firmware/scmi.c | 3 + drivers/reset/Kconfig | 8 +++ drivers/reset/Makefile | 1 + drivers/reset/reset-scmi.c | 143 +++++++++++++++++++++++++++++++++++++ 4 files changed, 155 insertions(+) create mode 100644 drivers/reset/reset-scmi.c -- 2.17.1