@@ -8,7 +8,8 @@
ENTRY(putc)
addruart r1, r2, r3
- waituart r3, r1
+ waituartcts r3, r1
+ waituarttxrdy r3, r1
senduart r0, r1
busyuart r3, r1
mov pc, lr
@@ -45,7 +45,10 @@
bne 1002b
.endm
- .macro waituart,rd,rx
+ .macro waituarttxrdy,rd,rx
+ .endm
+
+ .macro waituartcts,rd,rx
#ifdef CONFIG_DEBUG_UART_8250_FLOW_CONTROL
1001: load \rd, [\rx, #UART_MSR << UART_SHIFT]
tst \rd, #UART_MSR_CTS
@@ -11,7 +11,10 @@
ldr \rv, = CONFIG_DEBUG_UART_VIRT
.endm
- .macro waituart,rd,rx
+ .macro waituarttxrdy,rd,rx
+ .endm
+
+ .macro waituartcts,rd,rx
.endm
.macro senduart,rd,rx
@@ -19,12 +19,15 @@
strb \rd, [\rx, #(AT91_DBGU_THR)] @ Write to Transmitter Holding Register
.endm
- .macro waituart,rd,rx
+ .macro waituarttxrdy,rd,rx
1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register
tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
beq 1001b
.endm
+ .macro waituartcts,rd,rx
+ .endm
+
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register
tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
@@ -17,12 +17,15 @@
strb \rd, [\rx, #UART_FIFO_REG]
.endm
- .macro waituart, rd, rx
+ .macro waituarttxrdy, rd, rx
1001: ldr \rd, [\rx, #UART_IR_REG]
tst \rd, #(1 << UART_IR_TXEMPTY)
beq 1001b
.endm
+ .macro waituartcts, rd, rx
+ .endm
+
.macro busyuart, rd, rx
1002: ldr \rd, [\rx, #UART_IR_REG]
tst \rd, #(1 << UART_IR_TXTRESH)
@@ -142,7 +142,10 @@ ARM_BE8( rev \rd, \rd )
bne 1002b
.endm
- .macro waituart,rd,rx
+ .macro waituarttxrdy,rd,rx
+ .endm
+
+ .macro waituartcts,rd,rx
.endm
/*
@@ -20,7 +20,10 @@
ldr \rp, =CLPS711X_UART_PADDR
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
.endm
.macro senduart,rd,rx
@@ -34,5 +34,8 @@
bne 1001b
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
.endm
@@ -21,7 +21,10 @@
strb \rd, [\rx, #UA0_EMI_REC]
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
.endm
.macro busyuart,rd,rx
@@ -29,7 +29,10 @@
strb \rd, [\rx, #UARTn_TXDATA]
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
1001: ldr \rd, [\rx, #UARTn_STATUS]
tst \rd, #UARTn_STATUS_TXBL
beq 1001b
@@ -23,7 +23,10 @@
beq 1001b
.endm
- .macro waituart, rd, rx
+ .macro waituartcts, rd, rx
+ .endm
+
+ .macro waituarttxrdy, rd, rx
mov \rd, #0x2000000
1001:
subs \rd, \rd, #1
@@ -47,7 +50,10 @@
beq 1001b
.endm
- .macro waituart, rd, rx
+ .macro waituartcts, rd, rx
+ .endm
+
+ .macro waituarttxrdy, rd, rx
mov \rd, #0x10000000
1001:
subs \rd, \rd, #1
@@ -72,7 +78,10 @@
.endm
- .macro waituart, rd, rx
+ .macro waituartcts, rd, rx
+ .endm
+
+ .macro waituarttxrdy, rd, rx
mov \rd, #0x2000000
1001:
subs \rd, \rd, #1
@@ -35,7 +35,10 @@
str \rd, [\rx, #0x40] @ TXDATA
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
.endm
.macro busyuart,rd,rx
@@ -25,7 +25,10 @@
beq 1002b
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
1001: ldr \rd, [\rx, #MESON_AO_UART_STATUS]
tst \rd, #MESON_AO_UART_TX_FIFO_FULL
bne 1001b
@@ -17,7 +17,10 @@ ARM_BE8(rev \rd, \rd )
str \rd, [\rx, #0x70]
.endm
- .macro waituart, rd, rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy, rd, rx
@ check for TX_EMT in UARTDM_SR
ldr \rd, [\rx, #0x08]
ARM_BE8(rev \rd, \rd )
@@ -75,5 +75,8 @@ omap_uart_lsr: .word 0
bne 1001b
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
.endm
@@ -26,7 +26,10 @@
strb \rd, [\rx, #UART01x_DR]
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
1001: ldr \rd, [\rx, #UART01x_FR]
ARM_BE8( rev \rd, \rd )
tst \rd, #UART01x_FR_TXFF
@@ -33,7 +33,10 @@
ldr \rv, =SCIF_VIRT
.endm
- .macro waituart, rd, rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy, rd, rx
1001: ldrh \rd, [\rx, #FSR]
tst \rd, #TDFE
beq 1001b
@@ -51,7 +51,10 @@
str \rd, [\rx, #UTDR]
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
1001: ldr \rd, [\rx, #UTSR1]
tst \rd, #UTSR1_TNF
beq 1001b
@@ -69,7 +69,10 @@ ARM_BE8(rev \rd, \rd)
1002: @ exit busyuart
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
ldr \rd, [\rx, # S3C2410_UFCON]
ARM_BE8(rev \rd, \rd)
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
@@ -29,7 +29,10 @@
.macro busyuart,rd,rx
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
1001: ldr \rd, [\rx, #SIRF_LLUART_TXFIFO_STATUS]
tst \rd, #SIRF_LLUART_TXFIFO_EMPTY
beq 1001b
@@ -45,7 +45,10 @@
strb \rd, [\rx, #ASC_TX_BUF_OFF]
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
1001: ldr \rd, [\rx, #ASC_STA_OFF]
tst \rd, #ASC_STA_TX_FULL
bne 1001b
@@ -27,7 +27,10 @@
strb \rd, [\rx, #STM32_USART_TDR_OFF]
.endm
-.macro waituart,rd,rx
+.macro waituartcts,rd,rx
+.endm
+
+.macro waituarttxrdy,rd,rx
1001: ldr \rd, [\rx, #(STM32_USART_SR_OFF)] @ Read Status Register
tst \rd, #STM32_USART_TXE @ TXE = 1 = tx empty
beq 1001b
@@ -178,7 +178,7 @@
1002:
.endm
- .macro waituart, rd, rx
+ .macro waituartcts, rd, rx
#ifdef FLOW_CONTROL
cmp \rx, #0
beq 1002f
@@ -189,6 +189,9 @@
#endif
.endm
+ .macro waituarttxrdy,rd,rx
+ .endm
+
/*
* Storage for the state maintained by the macros above.
*
@@ -29,5 +29,8 @@
beq 1001b @ wait until transmit done
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
.endm
@@ -28,7 +28,10 @@
bne 1001b
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
.endm
#endif
@@ -33,7 +33,10 @@
strb \rd, [\rx, #UART_FIFO_OFFSET] @ TXDATA
.endm
- .macro waituart,rd,rx
+ .macro waituartcts,rd,rx
+ .endm
+
+ .macro waituarttxrdy,rd,rx
1001: ldr \rd, [\rx, #UART_SR_OFFSET]
ARM_BE8( rev \rd, \rd )
tst \rd, #UART_SR_TXEMPTY
@@ -89,11 +89,13 @@ ENTRY(printascii)
2: teq r1, #'\n'
bne 3f
mov r1, #'\r'
- waituart r2, r3
+ waituartcts r2, r3
+ waituarttxrdy r2, r3
senduart r1, r3
busyuart r2, r3
mov r1, #'\n'
-3: waituart r2, r3
+3: waituartcts r2, r3
+ waituarttxrdy r2, r3
senduart r1, r3
busyuart r2, r3
b 1b
This patch was triggered by a remark from Russell that introducing a call to the waituart (needed to fix debug prints on the Qualcomm platforms) was dangerous because in some cases this will involve waiting for a modem CTS (clear to send) signal, and debug messages would maybe not work on platforms with no modem connected to the UART port: they will just hang waiting for the modem to assert CTS and this might never happen. Looking through all UART debug drivers implementing the waituart macro I discovered that all users except two actually use this macro to check if the UART is ready for TX, let's call this TXRDY. Only two debug UART drivers actually check for CTS: - arch/arm/include/debug/8250.S - arch/arm/include/debug/tegra.S The former is very significant since the 8250 is possibly the most common UART on the planet. We have the following problem: the semantics of waituart are ambiguous making it dangerous to introduce the macro to debug code fixing debug prints for Qualcomm. To start to pry this problem apart, this patch does the following: - Convert all debug UART drivers to define two macros: - waituartcts with the clear semantic to wait for CTS to be asserted - waituarttxrdy with the clear semantic to wait for the TX capability of the UART to be ready - When doing this take care to assign the right function to each drivers macro, so they now do exactly the above. - Update the three sites in the kernel invoking the waituart macro to call waituartcts/waituarttxrdy in sequence, so that the functional impact on the kernel should be zero. After this we can start to change the code sites using this code to do the right thing. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/compressed/debug.S | 3 ++- arch/arm/include/debug/8250.S | 5 ++++- arch/arm/include/debug/asm9260.S | 5 ++++- arch/arm/include/debug/at91.S | 5 ++++- arch/arm/include/debug/bcm63xx.S | 5 ++++- arch/arm/include/debug/brcmstb.S | 5 ++++- arch/arm/include/debug/clps711x.S | 5 ++++- arch/arm/include/debug/dc21285.S | 5 ++++- arch/arm/include/debug/digicolor.S | 5 ++++- arch/arm/include/debug/efm32.S | 5 ++++- arch/arm/include/debug/icedcc.S | 15 ++++++++++++--- arch/arm/include/debug/imx.S | 5 ++++- arch/arm/include/debug/meson.S | 5 ++++- arch/arm/include/debug/msm.S | 5 ++++- arch/arm/include/debug/omap2plus.S | 5 ++++- arch/arm/include/debug/pl01x.S | 5 ++++- arch/arm/include/debug/renesas-scif.S | 5 ++++- arch/arm/include/debug/sa1100.S | 5 ++++- arch/arm/include/debug/samsung.S | 5 ++++- arch/arm/include/debug/sirf.S | 5 ++++- arch/arm/include/debug/sti.S | 5 ++++- arch/arm/include/debug/stm32.S | 5 ++++- arch/arm/include/debug/tegra.S | 5 ++++- arch/arm/include/debug/vf.S | 5 ++++- arch/arm/include/debug/vt8500.S | 5 ++++- arch/arm/include/debug/zynq.S | 5 ++++- arch/arm/kernel/debug.S | 6 ++++-- 27 files changed, 114 insertions(+), 30 deletions(-) -- 2.26.2