diff mbox

[v4] ARM: Add SystemTap probes to longjmp and setjmp.

Message ID 1392830753-3100-1-git-send-email-will.newton@linaro.org
State Accepted
Headers show

Commit Message

Will Newton Feb. 19, 2014, 5:25 p.m. UTC
Now the ARM port implements pointer encryption for jmpbufs, gdb needs
a SystemTap probe point in longjmp to determine the target PC of
a call to longjmp. This patch implements the probe point in longjmp
and a similar probe point in setjmp.

In order to have all the appropriate registers available to pass to the
probe this reorders the layout of jmpbuf, putting the sp and lr registers
at the start rather than the end, allowing them to be read and
written sequentially.

Tested on armv7, no new failures in the glibc testsuite and confirmed
that this fixes the gdb.base/longjmp.exp failures in the gdb testsuite.

ChangeLog:

2014-01-27  Will Newton  <will.newton@linaro.org>

	* sysdeps/arm/__longjmp.S: Include stap-probe.h.
	(__longjmp): Restore sp and lr before restoring callee
	saved registers.  Add longjmp and longjmp_target
	SystemTap probe point.
	* sysdeps/arm/bits/setjmp.h (__jmp_buf): Update comment.
	* sysdeps/arm/include/bits/setjmp.h (__JMP_BUF_SP):
	Define to zero to match jmpbuf layout.
	* sysdeps/arm/setjmp.S: Include stap-probe.h.
	(__sigsetjmp): Save sp and lr before saving callee
	saved registers.  Add setjmp SystemTap probe point.
---
 sysdeps/arm/__longjmp.S           | 61 ++++++++++++++++++++++++---------------
 sysdeps/arm/bits/setjmp.h         |  5 ++--
 sysdeps/arm/include/bits/setjmp.h |  2 +-
 sysdeps/arm/setjmp.S              | 12 ++++++--
 4 files changed, 49 insertions(+), 31 deletions(-)

Changes in v4:
 - Update __jmp_buf comment to match the code
diff mbox

Patch

diff --git a/sysdeps/arm/__longjmp.S b/sysdeps/arm/__longjmp.S
index 27c57a1..08521e5 100644
--- a/sysdeps/arm/__longjmp.S
+++ b/sysdeps/arm/__longjmp.S
@@ -17,6 +17,7 @@ 
    <http://www.gnu.org/licenses/>.  */
 
 #include <sysdep.h>
+#include <stap-probe.h>
 #include <bits/setjmp.h>
 #include <rtld-global-offsets.h>
 #include <arm-features.h>
@@ -25,31 +26,35 @@ 
 
 ENTRY (__longjmp)
 	mov	ip, r0
-	movs	r0, r1		/* get the return value in place */
-	it	eq
-	moveq	r0, #1		/* can't let setjmp() return zero! */
 
 #ifdef CHECK_SP
 	sfi_breg ip, \
-	ldr	r4, [\B, #32]	/* jmpbuf's sp */
+	ldr	r4, [\B]	/* jmpbuf's sp */
 	cfi_undefined (r4)
 #ifdef PTR_DEMANGLE
 	PTR_DEMANGLE (r4, r4, a3, a4)
 #endif
 	CHECK_SP (r4)
 #endif
-	sfi_sp sfi_breg ip, \
-	ldmia	\B!, JMP_BUF_REGLIST
+
 #ifdef PTR_DEMANGLE
 	ldr	a4, [ip], #4
-	PTR_DEMANGLE (a4, a4, a3, a2)
-	mov	sp, a4
-	ldr	a4, [ip], #4
-	PTR_DEMANGLE2 (lr, a4, a3)
+	PTR_DEMANGLE (a4, a4, a3, r4)
+	cfi_undefined (r4)
+	ldr	r4, [ip], #4
+	PTR_DEMANGLE2 (r4, r4, a3)
 #else
-	ldr	sp, [ip], #4
-	ldr	lr, [ip], #4
+	ldr	a4, [ip], #4
+	ldr	r4, [ip], #4
+	cfi_undefined (r4)
 #endif
+	/* longjmp probe expects longjmp first argument (4@r0), second
+	   argument (-4@r1), and target address (4@r4), respectively.  */
+	LIBC_PROBE (longjmp, 3, 4@r0, -4@r1, 4@r4)
+	mov	sp, a4
+	mov	lr, r4
+	sfi_sp sfi_breg ip, \
+	ldmia	\B!, JMP_BUF_REGLIST
 	cfi_restore (v1)
 	cfi_restore (v2)
 	cfi_restore (v3)
@@ -67,27 +72,27 @@  ENTRY (__longjmp)
 
 #ifdef NEED_HWCAP
 # ifdef IS_IN_rtld
-	ldr	a2, 1f
+	ldr	a4, 1f
 	ldr	a3, .Lrtld_local_ro
-0:	add	a2, pc, a2
-	add	a2, a2, a3
-	ldr	a2, [a2, #RTLD_GLOBAL_RO_DL_HWCAP_OFFSET]
+0:	add	a4, pc, a4
+	add	a4, a4, a3
+	ldr	a4, [a4, #RTLD_GLOBAL_RO_DL_HWCAP_OFFSET]
 # else
 #  ifdef PIC
-	ldr	a2, 1f
+	ldr	a4, 1f
 	ldr	a3, .Lrtld_global_ro
-0:	add	a2, pc, a2
-	ldr	a2, [a2, a3]
-	ldr	a2, [a2, #RTLD_GLOBAL_RO_DL_HWCAP_OFFSET]
+0:	add	a4, pc, a4
+	ldr	a4, [a4, a3]
+	ldr	a4, [a4, #RTLD_GLOBAL_RO_DL_HWCAP_OFFSET]
 #  else
-	ldr	a2, .Lhwcap
-	ldr	a2, [a2, #0]
+	ldr	a4, .Lhwcap
+	ldr	a4, [a4, #0]
 #  endif
 # endif
 #endif
 
 #ifdef __SOFTFP__
-	tst	a2, #HWCAP_ARM_VFP
+	tst	a4, #HWCAP_ARM_VFP
 	beq	.Lno_vfp
 #endif
 
@@ -98,7 +103,7 @@  ENTRY (__longjmp)
 .Lno_vfp:
 
 #ifndef ARM_ASSUME_NO_IWMMXT
-	tst	a2, #HWCAP_ARM_IWMMXT
+	tst	a4, #HWCAP_ARM_IWMMXT
 	beq	.Lno_iwmmxt
 
 	/* Restore the call-preserved iWMMXt registers.  */
@@ -118,6 +123,14 @@  ENTRY (__longjmp)
 .Lno_iwmmxt:
 #endif
 
+	/* longjmp_target probe expects longjmp first argument (4@r0), second
+	   argument (-4@r1), and target address (4@r14), respectively.  */
+	LIBC_PROBE (longjmp_target, 3, 4@r0, -4@r1, 4@r14)
+
+	movs	r0, r1		/* get the return value in place */
+	it	eq
+	moveq	r0, #1		/* can't let setjmp() return zero! */
+
 	DO_RET(lr)
 
 #ifdef NEED_HWCAP
diff --git a/sysdeps/arm/bits/setjmp.h b/sysdeps/arm/bits/setjmp.h
index 41423b2..a687359 100644
--- a/sysdeps/arm/bits/setjmp.h
+++ b/sysdeps/arm/bits/setjmp.h
@@ -28,9 +28,8 @@ 
 /* The exact set of registers saved may depend on the particular core
    in use, as some coprocessor registers may need to be saved.  The C
    Library ABI requires that the buffer be 8-byte aligned, and
-   recommends that the buffer contain 64 words.  The first 27 words
-   are occupied by v1-v6, sl, fp, sp, pc, and d8-d15.  (Note that
-   d8-15 require 17 words, due to the use of fstmx.)  */
+   recommends that the buffer contain 64 words.  The first 26 words
+   are occupied by sp, lr, v1-v6, sl, fp, and d8-d15.  */
 typedef int __jmp_buf[64] __attribute__((__aligned__ (8)));
 #endif
 
diff --git a/sysdeps/arm/include/bits/setjmp.h b/sysdeps/arm/include/bits/setjmp.h
index 220dfe8..5877c1f 100644
--- a/sysdeps/arm/include/bits/setjmp.h
+++ b/sysdeps/arm/include/bits/setjmp.h
@@ -30,7 +30,7 @@ 
 # define JMP_BUF_REGLIST	{v1-v6, sl, fp}
 
 /* Index of __jmp_buf where the sp register resides.  */
-# define __JMP_BUF_SP		8
+# define __JMP_BUF_SP		0
 #endif
 
 #endif  /* include/bits/setjmp.h */
diff --git a/sysdeps/arm/setjmp.S b/sysdeps/arm/setjmp.S
index b0b45ed..5e55ca5 100644
--- a/sysdeps/arm/setjmp.S
+++ b/sysdeps/arm/setjmp.S
@@ -17,6 +17,7 @@ 
    <http://www.gnu.org/licenses/>.  */
 
 #include <sysdep.h>
+#include <stap-probe.h>
 #include <bits/setjmp.h>
 #include <rtld-global-offsets.h>
 #include <arm-features.h>
@@ -27,9 +28,11 @@  ENTRY (__sigsetjmp)
 #endif
 	mov	ip, r0
 
-	/* Save registers */
-	sfi_breg ip, \
-	stmia	\B!, JMP_BUF_REGLIST
+	/* setjmp probe expects sigsetjmp first argument (4@r0), second
+	   argument (-4@r1), and target address (4@r14), respectively.  */
+	LIBC_PROBE (setjmp, 3, 4@r0, -4@r1, 4@r14)
+
+	/* Save sp and lr */
 #ifdef PTR_MANGLE
 	mov	a4, sp
 	PTR_MANGLE2 (a4, a4, a3)
@@ -40,6 +43,9 @@  ENTRY (__sigsetjmp)
 	str	sp, [ip], #4
 	str	lr, [ip], #4
 #endif
+	/* Save registers */
+	sfi_breg ip, \
+	stmia	\B!, JMP_BUF_REGLIST
 
 #if !defined ARM_ASSUME_NO_IWMMXT || defined __SOFTFP__
 # define NEED_HWCAP 1