@@ -521,57 +521,6 @@
#size-cells = <1>;
ranges = <0x0 0x100000 0x8000>;
- mac: ethernet@0 {
- compatible = "ti,am4372-cpsw","ti,cpsw";
- reg = <0x0 0x800
- 0x1200 0x100>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
- <&dpll_clksel_mac_clk>;
- clock-names = "fck", "cpts", "50mclk";
- assigned-clocks = <&dpll_clksel_mac_clk>;
- assigned-clock-rates = <50000000>;
- status = "disabled";
- cpdma_channels = <8>;
- ale_entries = <1024>;
- bd_ram_size = <0x2000>;
- mac_control = <0x20>;
- slaves = <2>;
- active_slave = <0>;
- cpts_clock_mult = <0x80000000>;
- cpts_clock_shift = <29>;
- ranges = <0 0 0x8000>;
- syscon = <&scm_conf>;
-
- davinci_mdio: mdio@1000 {
- compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
- reg = <0x1000 0x100>;
- clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <0>;
- bus_freq = <1000000>;
- status = "disabled";
- };
-
- cpsw_emac0: slave@200 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- phys = <&phy_gmii_sel 1 0>;
- };
-
- cpsw_emac1: slave@300 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- phys = <&phy_gmii_sel 2 0>;
- };
- };
-
mac_sw: switch@0 {
compatible = "ti,am4372-cpsw","ti,cpsw-switch";
reg = <0x0 0x4000>;
All am437x boards have been converted to use new driver, so drop legacy cpsw dt node. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm/boot/dts/am437x-l4.dtsi | 51 -------------------------------- 1 file changed, 51 deletions(-) -- 2.17.1