new file mode 100644
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4801 Display Bias regulators
+
+maintainers:
+ - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+ Regulator nodes should be named to DSVP and DSVN. The
+ definition for each of these nodes is defined using the standard
+ binding for regulators at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+ Datasheet is available at
+ https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf
+
+#The valid names for RT4801 regulator nodes are:
+#DSVP, DSVN
+
+properties:
+ compatible:
+ enum:
+ - richtek,rt4801
+
+ reg:
+ maxItems: 1
+
+ enable-gpios:
+ description: GPIOs to use to enable DSVP/DSVN regulator.
+ The first one is ENP to enable DSVP, and second one is ENM to enable DSVN.
+ Number of GPIO in the array list could be 1 or 2.
+ If only one gpio is specified, only one gpio used to control ENP/ENM.
+ Else both are spefied, DSVP/DSVN could be controlled individually.
+ Othersie, this property not specified. treat both as always-on regulator.
+ minItems: 1
+ maxItems: 2
+
+patternProperties:
+ "^DSV(P|N)$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single display bias regulator.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties:
+ - enable-gpios
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rt4801@73 {
+ compatible = "richtek,rt4801";
+ reg = <0x73>;
+ enable-gpios = <&gpio26 2 0>, <&gpio26 3 0>;
+
+ dsvp: DSVP {
+ regulator-name = "rt4801,dsvp";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-boot-on;
+ };
+ dsvn: DSVN {
+ regulator-name = "rt4801,dsvn";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-boot-on;
+ };
+
+ };
+ };